Genie IPOC8T Quick Installation Manual

It enables multiple megapixels network cameras sharing one cable, transmitting both power and high-speed network for longer distance. Cable types cover 75ohm coaxial cable, double stranded electric wire and twisted pair UTP cable etc. Plug & Play designed, and with unrelenting commitment to performance, this cutting-edge cabling technology will save a great many installation time and cabling costs. PRODUCT INTRO Ver. 2017.6.1 Quick Installation Guide Please read and understand thoroughly this quick installation guide before using and keep it for future reference. PoE Output Network Output +12V DC Output STANDARD IP CAMERA PoE IP CAMERA UP TO 300m (1000ft) OVER RG-59 COAX NETWORK CABLE DC48V POWER NVR/ROUTER INSTALLATION MAP Network Output +12V DC Output STANDARD IP CAMERA IPOC8T Transmitter Enable 8 network cameras transmitting both DC power & network signal over one single cable. IPOC8T

3 Power Indicating LED 4 DC 48V Power Input 75ohm BNC Connector 1 CAT 5 Modular Plug (PoE Optional) A DC12V Power Output Plug B 75ohm BNC Connector C A B C 165mm 165mm 68mm 60mm 45mm Transmitter: IPOC8T Reciever: IPOC1R SPECIFICATION HARDWARE INTERFACE Connector type: Cable type: Range: Bandwidth: BNC 75ohm RG59/ RG11/ 2-core Power Cable 300m over RG59/Power Cable 500Mbps ~1Gbps (total up + down) PHYSICAL Dimensions: Weight: Working temperature: Relative humidity: L137mm x W85mm x H35mm 350g -10°C to +50°C 85% non-condensing ETHRNET INTERFACE Connector type: Cable type: Range: RJ45 Straight through or cross-over upto 100m (350ft) POWER LED INDICATOR ON: OFF: Normal power supply Without power supply or there is abnormalty in the circuit. AC100V ~ AC240V DC48V 3000mA POWER Input voltage: Output voltage: Supply current: IPOC8-T © Genie CCTV Ltd 2017 All rights reserved. MANUFACTURER: Genie CCTV, Ltd www.geniecctv.com [email protected] 86mm 104mm 142mm 2 3 4 1 117mm DIAGRAM 1 Connection by 75ohm coaxial cable Multiple Group Connection Plug & Play ROUTER/ NVR/ UPPER HUB Note: Max 8 cameras were supported transmitting Ethernet signal in a LAN group. The default network password for each group is HomePlugAV. If many groups were added to the same network, users need to set an unique password for each group by our PC based utility software, so as to avoid signal intererence during transmission. Scan the QR-code on the right to download the guiding steps on how to set up the network password. Or, the document is also available from below link by website browser. Web link: http://okgo.top/14931080810048695.pdf DIAGRAM 2 GROUP 1 GROUP 2 ETHERNET SWITCH ETHERNET SWITCH POWER (DC48V) PoC & EoC RECEIVER CONVENTIONAL IP CAMERA PoE IP CAMERA TRANSMITTER Transmitter Receivers IPOC1RP IPOC1R