Northern Lights Everbright Rear Drive SE01 Instruction Manual

1. Assemble the upper handlebar (C, C-3) by carriage bolts (L-2) with nut (L-3) and semi-circle washer (L-4). ...

2 PCS F-16 Cross disc 2 PCS F-17 Flat washerφ5xφ16x1t 4 PCS F-18 Cap for the disc 2 PCS F-19 Front cover (Right ) 1 PCS F-20 Chain cover(Right ) 1 PCS F-21 Screw M5x16L 8 PCS F-22 Round disc 2 PCS F-23 Chain cover(Left) 1 PCS F-24 Self tapping screw 7 PCS F-25 Front cover (Left) 1 PCS F-26 Cover for the handlebar post 1 PCS F-27 Screw for sensor box 1 PCS F-28 Adaptor 1 PCS F-29 DC wire 1 PCS G~G-8 Flywheel set 1 PCS H-1~H-11 Idler wheel set 1 SET I ~I-9, F-1 Magnetic set + Gear box 1 PCS J Rear stabilizer 1 PCS J-1 Block for the adjustable foot cap 4 PCS J-2 A ...

1. Attach the Front Stabilizer (J-4) to the Main Frame (F) using four Allen bolt (L-11) 2. Attach the Rear Stabilizer (J) to the Main Frame (F) using four Allen bolt (L-11). . 3. Please remove the handlebar post cover (F-26) from the main frame (F). After assembly, the Trainer can be adjusted to slightly uneven ground by adjusting the height of the foot caps at the front and back. The pre-assembled transportation wheels in the front allow easy moving of the Elliptical and therefore during assembly, need to be pointing down at the front (45°). Assembly Stage #2 1. Assemble t ...