Intelix HD-4X1 Installation Manual

Suite #201 Middleton, WI 53562 Phone: 608-831-0880 Toll-Free: 866-4-MATMIX Fax: 608-831-1833 HD-4X1 Installation Guide The Intelix HD-4X1 is a four input, one output HDMI switcher. The HD-4X1 supports 3D, 1080p and PC resolutions up to 1920x1200. It also supports 7.1 channel audio, including Dolby® TrueHD and DTS-HD, and audio return channel (ARC). Troubleshooting Symptom Possible Solutions No signal Verify HDMI cables and source and destination HDMI ports are operational. Video appears with no audio If using the ARC/SPDIF output, verify the Audio Return option is set accordingly. See Operation Instructions for more information. If using destination device’s built-in speakers, make sure destination device can decode the audio format. Installation Instructions 1. Power off the sources and destination device. 2. Connect sources to the HDMI inputs on the HD-4X1. Connect destination device to the HDMI output on the HD-4X1. 3. If the HD-4X1 is going to be connected to an audio distribution system, connect a high quality RCA cable to the ARC/SPDIF output. 4. If the HD-4X1 will be controlled by a third- party control system, connect a DE9 cable to the RS232 port. 5. Connect the included power supply to the 5VDC port. Connect the power supply to AC power outlet. 6. Power on the HD-4X1. 7. Power on destination device and sources. Important notice:  Do not attempt to disassemble or alter the switcher housing. There are no user-serviceable parts inside the unit. Doing so will void your warranty.  To minimize the possibility of equipment damage from electrostatic discharge (ESD), all source and destination equipment must be powered off during installation.  Allow proper ventilation to reduce the risk of thermal failure. Operation Instructions Source Selection (Front Panel) The four inputs each have their own push button on the front panel. Press the desired button to select the corresponding input. Menu Navigation (Front Panel) Press the Menu button on the far left side of the front panel to bring up the on screen display. Use the up, down, left, and right push buttons to navigate the menu and use the enter button to confirm selections. Source Selection and Menu Navigation (IR Remote) All source selection and menu navigation buttons found on the front panel can also be found on the included infrared remote control. Audio Return Channel & SPDIF Output When connecting the HD-4X1 to an external audio distribution system, the Audio Return option needs to be set accordingly. If the connected display and audio system supports ARC, set Audio Return to ‘on’. If the connected display and/or audio system do not support ARC, set Audio Return to ‘off’, and the ARC/SPDIF output will operate as a standard coaxial SPDIF output.

Suite #201 Middleton, WI 53562 Phone: 608-831-0880 Toll-Free: 866-4-MATMIX Fax: 608-831-1833 Technical Specifications Supported Inputs Input Format HDMI Input Signal Types HDMI (plus PC Video to WUXGA) Supported Output Output Format HDMI Output Signal Type High Definition Multimedia Interface Signal Characteristics Freq. Bandwidth 2.25Gbps (Single Link) Compliance HDMI, HDCP & CEC Color Depth Deep Color 36/30/24 Bit, 1080p Repeater Operation HDCP Repeater Support Supported Audio Embedded Audio Dolby® Digital TrueHD and DTS-HD Return Audio Support Audio Return Channel (ARC) I/O Connections Input Connector 4x Type A HDMI Female Output Connectors 1x Type A HDMI Female Device Control Device Control Front Panel, IR Remote w/OSD or RS-232 Environmental Operating Temperature 0° to +40° C (+32° to +104° F) Operating Humidity 20% to 90%, Non-condensing Storage Temperature -10° to +60° C (+14° to +140° F) Storage Humidity 20% to 90%, Non-condensing Power Requirement External Power Supply 100~240VAC to 5VDC/2A Locking Adapter Command Code Response Description s port a >Select Input Port A Select Input Port A s port b >Select Input Port B Select Input Port B s port c >Select Input Port C Select Input Port C s port d >Select Input Port D Select Input Port D s menu 0 >OSD MENU Off OFF : No Display On-Screen MENU s menu 1 >OSD MENU On ON : Display On-Screen MENU s info 0 >OSD System Information Off OFF : No Display On-Screen System Information s info 1 >OSD System Information On ON : Display On-Screen System Information s menuct u >MENU Cursor Up Move MENU Project Up Move s menuct d >MENU Cursor Down Move MENU Project Down Move s menuct l >MENU Cursor Left Move MENU Project Left Move s menuct r >MENU Cursor Right Move MENU Project Right Move s menuct e >MENU Cursor Enter MENU Project Enter s arctx 1 >ARC mode is on ARC Mode Is On s arctx 0 >ARC mode is off ARC Mode Is Off s reset >System Reset System Reset r port >Select port ? Show Select Input Port Status r arctx >ARC mode is ? Show ARC Mode Status r fwver >FW Version : Vx.xx Show Firmware Version RS232 Transmission Format: Baud Rate: 115200 bps Data Bit: 8 bits Parity: None Stop Bit: 1 bit ALL RS232 COMMANDS MUST CONCLUDE WITH A CARRIAGE RETURN AND LINE FEED.