Nikon WT-7 Operation & User’s Manual

See the manual supplied with the WT-7 for specifications and other information. • Read this manual thoroughly before using the camera. • After reading this manual, keep it in a readily accessible place for future reference.

What the WT-7 Can Do for Users of the D810, D810A, D750, and D7200 This guide describes how to attach the WT-7 to a D810, D810A, D750, or D7200 digital camera and connect the camera to a computer, ftp server, or other device over Ethernet or wireless networks. It also describes the operations that can be performed once a connection is established. Before connecting the WT-7, confirm that the firmware for the camera and WT-7 have been updated to the latest version. For more information, visit the websites listed on page x. Model Name: WT-7 (N1504) Model Name: WT-7A (N1534) Model Name: WT-7B (N1535) Model Name: WT-7C (N1536)

Before using the WT-7 network function, connect the camera to a network. Ethernet Networks For information on connecting to a computer, see page 9. For information on connecting to an ftp server, see page 51. Wireless Networks For information on connecting to a computer, see page 17. For information on connecting to an ftp server, see page 57.

Once a network connection has been established, you can: Upload existing photos and movies Take or browse photos remotely Nikon User Support for India and Australia Contact a Nikon representative for technical assistance with the operation of your Nikon product or products. For information on the Nikon representatives in your area, visit http://www.nikon-asia.com/support. Image Transfer (030) FTP Upload (070) Computer ftp server Camera Control (035) HTTP Server (038) Camera Control Pro 2 iPhone Computer

Trademark Information IOS is a trademark or registered trademark of Cisco Systems, Inc., in the United States and/or other countries and is used under license. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac, OS X, and iPhone® are registered trademarks of Apple Inc. in the United States and/or other countries. The SD, SDHC, and SDXC logos are trademarks of the SD-3C, LLC. CompactFlash is a trademark of SanDisk Corporation. Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi Alliance. All other trade names mentioned in this guide or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. Memory Cards Throughout this guide, CompactFlash and SD memory cards are referred to as “memory cards”. Apple Public Source License This product includes Apple mDNS source code that is subject to the terms of the Apple Public Source License located at URL http://developer.apple.com/opensource/. This file contains Original Code and/or Modifications of Original Code as defined in and that are subject to the Apple Public Source License Version 2.0 (the ‘License’). You may not use this file except in compliance with the License. Please obtain a copy of the License at http://www.opensource.apple.com/license/apsl/ and read it before using this file. The Original Code and all software distributed under the License are distributed on an ‘AS IS’ basis, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. Please see the License for the specific language governing rights and limitations under the License.

retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission. • Nikon reserves the right to change the appearance and specifications of the hardware and software described in this guide at any time and without prior notice. • Nikon will not be held liable for any damages resulting from the use of this product. • While every effort has been made to ensure that the information in this guide is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately). Copyright Comply with copyright notices. Under copyright law, photographs or recordings of copyrighted works made with the camera can not be used without the permission of the copyright holder. Exceptions apply to personal use, but note that even personal use may be restricted in the case of photographs or recordings of exhibits or live performances. Security Although one of the benefits of this product is that it allows others to freely connect for the wireless exchange of data anywhere within its range, the following may occur if security is not enabled: • Data theft: Malicious third-parties may intercept wireless transmissions to steal user IDs, passwords, and other personal information. • Unauthorized access: Unauthorized users may gain access to the network and alter data or perform other malicious actions. Note that due the design of wireless networks, specialized attacks may allow unauthorized access even when security is enabled.

What the WT-7 Can Do for Users of the D810, D810A, D750, and D7200............................................ii Notices.......................................................................................................vi Introduction 1 Parts of the WT-7 ....................................................................................2 Getting Ready..........................................................................................3 Network Functions Available with the D810, D810A, D750, and D7200.............................................................................................7 Transfer, Control, and HTTP 9 Ethernet Connections...........................................................................9 Step 1: Connecting the Equipment..........................................10 Step 2: Configuring the Hardware for Ethernet Connections...............................................................11 Step 3: The Connection Wizard..................................................12 Step 4: Pairing ..................................................................................15 Wireless Connections......................................................................... 17 Step 1: Readying the Equipment...............................................18 Step 2: Enable Camera Wireless.................................................19 Step 3: The Connection Wizard..................................................20 Step 4: Network Settings..............................................................27 Image Transfer...................................................................................... 30 Camera Control.................................................................................... 35 HTTP Server ........................................................................................... 38 Computer Web Browsers.............................................................43 iPhone Web Browsers....................................................................47

Step 2: Configuring the Hardware for Ethernet Connections ...............................................................53 Step 3: The Connection Wizard..................................................54 Wireless Connections.........................................................................57 Step 1: Connecting the Equipment ..........................................58 Step 2: Enable Camera Wireless .................................................59 Step 3: The Connection Wizard..................................................60 Step 4: Network Settings ..............................................................67 FTP Upload.............................................................................................70 Menu Guide 75 Choose Hardware................................................................................75 Network Settings.................................................................................76 The Profile List ..................................................................................76 Create Profile.....................................................................................76 Copy to/from Card..........................................................................77 Deleting Network Profiles ............................................................77 Editing Network Profiles ...............................................................78 Options....................................................................................................81 Auto Send...........................................................................................81 Delete After Send ............................................................................81 Send File As........................................................................................81 Overwrite If Same Name...............................................................82 Protect If Marked for Upload.......................................................82 Send Folder........................................................................................82

Battery Info........................................................................................83 Auto Power off Delay.....................................................................84 MAC Address ....................................................................................84 Firmware Version............................................................................84 Appendices 85 Copying Profiles................................................................................... 85 Creating Profiles on a Computer ................................................... 88 Creating an FTP Server ...................................................................... 90 Manual Profile Creation..................................................................... 98 Troubleshooting................................................................................100 Index.......................................................................................................102

This guide assumes basic knowledge of ftp servers, local area networks (LANs), and wireless networks. For more information on installing, configuring, and using devices in a network, contact the manufacturer or network administrator. A Illustrations The appearance and content of the software and operating system dialogs, messages, and displays shown in this guide may vary with the operating system used. For information on basic computer operations, see the documentation provided with the computer or operating system. A Camera Controls The camera and menu operations described in this guide are for the D810 and may differ from those for the D810A, D750, and D7200. A Life-Long Learning As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually-updated information is available on-line at the following sites: • For users in the U.S.A.: http://www.nikonusa.com/ • For users in Europe and Africa: http://www.europe-nikon.com/support/ • For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/ Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently-asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. See the following URL for contact information: http://imaging.nikon.com/

compatible Nikon digital cameras. Please read this guide thoroughly and keep it where all those who use the product can read it. The following symbols and conventions are used throughout this guide: D This icon marks cautions, information that should be read before use to prevent damage to the product. A This icon marks notes, information that should be read before using the device. 0 This icon marks references to other pages in this guide.

Parts of the WT-7 A The POWER LED When the WT-7 is on, the POWER LED glows green to indicate that the battery is fully charged or that an AC adapter is connected. At battery levels below 10%, it will flash to warn that the battery requires charging. When the WT-7 is turned off, the POWER LED briefly turns yellow as the product powers down. 4 11 10 2 7 3 8 9 1 5 6 1 Mounting screw.................................4 2 Power connector cover ....................6 3 Battery-chamber cover ....................3 4 Battery latch........................................3 5 Power switch.................10, 18, 52, 58 6 Status LEDs....................33, 36, 41, 73 POWER (green/yellow), LINK (green), ERROR (orange) 7 Attachment wheel.............................4 8 Ethernet connector cover 9 USB connector cover 10 USB connector....................................4 11 Ethernet connector

The WT-7 takes one EN-EL15 rechargeable Li-ion battery. Insert the battery as described below. 1 Open the battery-chamber cover. Unlatch the cover by sliding it as shown (q). Open the cover (w). 2 Insert the battery. Using the battery to keep the battery latch pressed to one side, slide the battery in until the latch clicks back into place. For safety precautions and information on charging the battery, see the battery and charger manuals. 3 Close the battery-chamber cover. Reverse the instructions in Step 1 to close and latch the cover as shown. Be sure the cover is securely latched.

After checking that the camera is off, align the WT-7 mounting screw with the camera tripod socket and tighten by rotating the attachment wheel in the direction shown by the LOCK arrow. Connecting the USB Cable Connect the WT-7 to the camera using the USB cable supplied with the WT-7 (D810 or D810A) or with the camera (D750 or D7200).

The Wireless Transmitter Utility is used for pairing in image transfer and camera control modes (015) and can also help create network profiles (088). You can install the utility after downloading it from the following website: http://downloadcenter.nikonimglib.com/ Be sure to use the latest versions of the Wireless Transmitter Utility and the camera firmware. A Removing the Battery Being careful not to drop the battery, open the WT-7 battery-chamber cover and remove the battery as shown at right. A Stand-By Mode When the WT-7 is disconnected from the camera or the camera is turned off, the WT-7 will turn off automatically after the delay chosen for Network > Options > Auto power off delay in the camera setup menu (084), reducing the drain on the battery.

The level of the battery inserted in the WT-7 can be determined by connecting the WT-7 to the camera (04) and checking the battery level using the Options > Battery info in the Network menu (083). A Using an AC Adapter To prevent loss of power when adjusting settings or transmitting images, use a fully-charged battery or an optional EP-5B power connector and EH-5b AC adapter. An optional EH-5/EH-5a AC adapter can also be used. Insert the power connector as shown below. 1 Unlatch the battery-chamber cover (q). 2 Open the battery-chamber (w) and power connector covers (e). 3 Using the power connector to keep the battery latch pressed to one side, slide the connector in until the latch clicks back into place (r). 4 Position the power connector so that the cord passes through the power connector slot and close the battery-chamber cover (t). Be sure that the cover is securely latched.

Network Functions Available with the D810, D810A, D750, and D7200 The WT-7 wireless transmitter connects D810, D810A, D750, or D7200 digital cameras to Ethernet and wireless networks. Photographs on the camera can then be transmitted to a computer or ftp server and the camera controlled remotely from a computer. The WT-7 supports the following functions: Before data can be transferred over a wireless or Ethernet network, the camera must be supplied with a network profile providing information on the host computer or ftp server. FTP upload (070) Upload existing photos and movies to a computer or ftp server, or upload new photos as they are taken. Image transfer (030) Camera control (035) Control the camera using optional Camera Control Pro 2 software and save new photos and movies directly to the computer. HTTP server (038) View and take pictures remotely using a browser- equipped computer or iPhone.

D Choosing a Power Source To prevent the camera or WT-7 powering off unexpectedly during setup or data transfer, use fully-charged batteries or optional AC adapters designated for use with the camera or WT-7. For more on camera power sources, see the camera manual. A FTP Servers Servers can be configured using standard ftp services available with supported operating systems, such as IIS (Internet Information Services). Connection to computers on other networks via a router, Internet ftp connections and ftp servers running third-party software are not supported. A Ethernet Connection No adjustments to wireless LAN settings are required when the camera is connected to a LAN by an Ethernet cable. A HTTP Server Mode Internet connections are not supported in http server mode. A Routers Connection to computers on other networks via a router is not supported. A Firewall Settings TCP ports 21 and 32768 through 61000 are used for ftp, TCP ports 22 and 32768 through 61000 for sftp, and TCP port 15740 and UDP port 5353 for connections to computers. File transfer may be blocked if the server firewall is not configured to allow access to these ports.

Transfer, Control, and HTTP Follow the steps below to connect via an Ethernet network. For information on wireless connections, see page 17. Ethernet Connections Image transfer Camera control HTTP server Install the Wireless Transmitter Utility (05) Step 1: Connect the camera, WT-7, and computer (010) Step 2: Configure the hardware for Ethernet connections (011) Step 3: Run the connection wizard (012) Step 4: Pair the camera and computer (015) Transfer pictures (030) Control the camera (035) Access the camera (038)

Ethernet Connections Step 1: Connecting the Equipment Before proceeding with the following steps, start the computer and log in. 1 Insert a memory card. Turn the camera off and insert a memory card (do not turn the camera off or disconnect the Ethernet cable while data are being transferred to the computer). This step can be omitted in camera control mode (035). 2 Attach the WT-7 (0 4). 3 Connect an Ethernet cable. Connect the Ethernet cable as shown below. Do not use force or insert the connectors at an angle. 4 Turn the camera on. Rotate the power switch to turn the camera on. 5 Press the power switch for about a second to turn the WT-7 on. Power switch

Ethernet Connections Step 2: Configuring the Hardware for Ethernet Connections Configure the WT-7 for use with Ethernet networks. 1 Select Choose hardware. In the setup menu, select Network, then highlight Choose hardware and press 2. The menu offers a choice of Wired LAN and Wireless LAN. 2 Select Wired LAN. Highlight Wired LAN and press J to select the highlighted option and return to the network menu.

Ethernet Connections Step 3: The Connection Wizard Follow the on-screen instructions to create a network profile. 1 Display network profiles. In the network menu, highlight Network settings and press 2 to display the profiles list and other network settings. 2 Select Create profile. Highlight Create profile and press 2. Note that if the list already contains nine profiles, you will need to delete an existing profile using the O (Q) button before proceeding (077). 3 Start the connection wizard. Highlight Connection wizard and press 2 to start the connection wizard. 4 Choose a connection type (07). Highlight Image transfer, Camera control, or HTTP server and press 2.

Ethernet Connections 5 Name the new network profile. Enter the name that will appear in the profile list and press J (to use the default name, press J without making any changes). Profile names can be up to 16 characters long. 6 Obtain or select an IP address. Highlight one of the following options and press J. • Obtain automatically: Select this option if the network is configured to supply the IP address automatically. • Enter manually: When prompted, enter an IP address and subnet mask by pressing 4 and 2 to highlight segments and 1 and 3 to change. Press J to proceed when entry is complete.

Ethernet Connections 7 Choose your next step. The IP address will be displayed; press J. Your next step depends on the connection type selected in Step 4 on page 12: 8 Exit the wizard. Highlight one of the following options and press J. • Connect and exit wizard: Save the new network profile and connect to the server. • Exit wizard: Save the new network profile and exit. Proceed to “HTTP Server” (038). If you chose Image transfer or Camera control, proceed to page 15. If you chose HTTP server, proceed to Step 8. A Routers Connection to computers on other networks via a router is not supported.

Ethernet Connections Step 4: Pairing If you selected Image transfer or Camera control in Step 4 of the connection wizard (012), pair the camera with the computer as described below. Pairing allows the computer to connect to the camera. 1 Connect the camera to the computer via USB. Disconnect the USB cable from the WT-7 and connect it to the computer. 2 Start the Wireless Transmitter Utility. When prompted, start the copy of the Wireless Transmitter Utility installed on the computer. Pairing will begin automatically.

Ethernet Connections 3 Disconnect the camera. The message at right will be displayed when pairing is complete. Disconnect the USB cable from the computer and reconnect it to the WT-7. 4 Exit the wizard. Highlight one of the following options and press J. • Connect and exit wizard: Save the new network profile and connect to the server. • Exit wizard: Save the new network profile and exit. Proceed to “Image Transfer” (030) or “Camera Control” (035).

Wireless Connections Wireless Connections Follow the steps below to connect to a wireless network. Image transfer Camera control HTTP server Install the Wireless Transmitter Utility Step 1: Ready the camera and WT-7 (018) Step 2: Enable Camera Wireless (019) Step 3: Run the connection wizard (020) Step 4: Adjust network settings (027) Adjust settings for the chosen connection type Pair the camera and computer Transfer pictures (030) Control the camera (035) Access the camera (038) A Wireless LANs These instructions assume that the computer and wireless LAN access point are already connected to the network.

Wireless Connections Step 1: Readying the Equipment After starting the computer and logging in, ready the camera and WT-7 as described below. 1 Insert a memory card. Turn the camera off and insert a memory card (do not turn the camera off while data are being transferred to the computer). This step can be omitted in camera control mode (07). 2 Attach the WT-7 (04). 3 Turn the camera on. Rotate the power switch to turn the camera on. 4 Press the power switch for about a second to turn the WT-7 on. Power switch

Wireless Connections Step 2: Enable Camera Wireless Ready the camera for connection to a wireless network. 1 Select Choose hardware. In the setup menu, select Network, then highlight Choose hardware and press 2. The menu offers a choice of Wired LAN and Wireless LAN. 2 Select Wireless LAN. Highlight Wireless LAN and press J to select the highlighted option and return to the network menu.

Wireless Connections Step 3: The Connection Wizard Follow the on-screen instructions to create a network profile. 1 Display network profiles. In the network menu, highlight Network settings and press 2 to display the profiles list and other network settings. 2 Select Create profile. Highlight Create profile and press 2. Note that if the list already contains nine profiles, you will need to delete an existing profile using the O (Q) button before proceeding. 3 Start the connection wizard. Highlight Connection wizard and press 2 to start the connection wizard. 4 Choose a connection type (07). Highlight Image transfer, Camera control, or HTTP server and press J.

Wireless Connections 5 Name the new network profile. Enter the name that will appear in the profile list and press J (to use the default name, press J without making any changes). Profile names can be up to 16 characters long. 6 Choose a connection method. Highlight the connection method used by the network and press J. More information can be found on the pages listed below. Search for wireless network Choose from a list of networks detected by the camera. Proceed to page 22. Push-button WPS Choose for wireless LAN access points with push- button WPS. Proceed to page 24. PIN-entry WPS Choose for wireless LAN access points with PIN- entry WPS. Proceed to page 25. Direct connection (ad hoc) Connect directly to a host computer or ftp server in ad hoc mode (supported in Windows 7 only). Proceed to page 26.

Wireless Connections ❚❚Search for Wireless Network Select Search for wireless network in Step 6 on page 21 to choose from a list of the networks (wireless LAN access points) detected by the camera. 1 Choose a network. Highlight a network SSID and press J (if the desired network is not displayed, press X to search again). If the selected network is encrypted (h), you will be prompted to enter the encryption key as described in Step 2. If the network is not encrypted, proceed to Step 3. The network type is indicated by the icons to the left of the ID: h Signal encrypted j/i Infrastructure/ad hoc A Hidden SSIDs Networks with hidden SSIDs are indicated by blank entries in the network list. If you select a network with a hidden SSID, you will be prompted to provide the network name; enter a name and press J to proceed to Step 2. SSID

Wireless Connections 2 Enter the encryption key. Enter the encryption key and press J (if the network uses open authentication, this dialog will not be displayed; proceed to Step 3). 3 Choose your next step. The message at right is displayed when a connection is established. Proceed to page 27.

Wireless Connections ❚❚Push-Button WPS Choose Push-button WPS in Step 6 on page 21 if the wireless LAN access point uses push-button WPS. 1 Press the WPS button on the wireless LAN access point. For more information, see the documentation provided with the wireless LAN access point. 2 Press J button on the camera. The camera will connect to the access point automatically. 3 Choose your next step. The message at right is displayed when a connection is established. Press J and proceed to page 27.

Wireless Connections ❚❚PIN-Entry WPS Choose PIN-entry WPS in Step 6 on page 21 if the wireless LAN access point uses PIN-entry WPS. 1 Enter the PIN for the wireless LAN access point. From a computer, enter the PIN for the wireless LAN access point. For more information, see the documentation provided with the wireless LAN access point. 2 Press J button on the camera. The camera will connect to the access point automatically. 3 Choose your next step. The message at right is displayed when a connection is established. Press J and proceed to page 27.

Wireless Connections ❚❚Direct Connection (Ad Hoc) To connect directly to an ftp server or computer in ad hoc mode, select Direct connection (ad hoc) in Step 6 on page 21. 1 Enter the SSID. Enter a network name (SSID) and press J. The default name is “WT” followed by the MAC address of the WT-7. 2 Enter the encryption key. Enter an encryption key and press J (the default key is “nikon”). Proceed to page 27.

Wireless Connections Step 4: Network Settings Choose an IP address. 1 Choose whether to copy the profile to the computer. Highlight one of the options at right and press J. To copy the new WT-7 network profile to the computer (085), select Yes (note that network settings for other operating systems may be overwritten). 2 Obtain or select an IP address. Highlight one of the following options and press J. • Obtain automatically: Select this option if the network is configured to supply the IP address automatically. • Enter manually: When prompted, enter an IP address and subnet mask by pressing 4 and 2 to highlight segments and 1 and 3 to change. Press J to proceed when entry is complete. A Routers Connection to computers on other networks via a router is supported only when HTTP server is selected. A MAC Address Filtering If the network uses MAC address filtering, the filter must be supplied with the MAC address of the WT-7. After attaching the WT-7 to the camera, choose Network > Options > MAC address from the camera setup menu and note the MAC address.

Wireless Connections 3 Confirm the IP address. The camera IP address will be displayed as shown at right; press J. If Image transfer or Camera control is selected, proceed to Step 4; otherwise, proceed to Step 6. 4 Connect the camera to the computer. Disconnect the USB cable from the WT-7 and connect it to the computer.

Wireless Connections 5 Start the Wireless Transmitter Utility. When prompted, start the copy of the Wireless Transmitter Utility installed on the computer (05). Pairing will begin automatically. 6 Disconnect the camera. The message at right will be displayed when pairing is complete. Disconnect the USB cable from the computer and reconnect it to the WT-7. 7 Exit the wizard. Highlight one of the following options and press J. • Connect and exit wizard: Save the new network profile and connect to the network. • Exit wizard: Save the new network profile and exit. Proceed to “Image Transfer” (030), “Camera Control” (035), or “HTTP Server” (038).

Image Transfer Image Transfer Image transfer is used to upload photographs and movies to the computer from a camera memory card. The explanation that follows assumes that existing pictures are used. 1 Display network profiles. In the setup menu, select Network > Network settings to display the profiles list. Image transfer profiles are indicated by a K icon. Highlight a profile and press J to select the highlighted profile and return to the network menu. The profile name will be displayed in green when a connection is established. 2 View pictures. Press the K button to view pictures. Display the first picture to be sent in single-image playback or highlight it in the thumbnail list.

Image Transfer 3 Upload pictures. Press J. A white transfer icon will appear on the picture and upload will begin immediately. The transfer icon turns green during upload, and turns blue when upload is complete. Additional pictures will be uploaded in the order selected. To upload a picture that has already been uploaded once, press J once to remove the blue transfer icon, and then press J again to mark the image with a white transfer icon. Uploading New Photographs as They Are Taken To upload new photographs as they are taken, select On for Network > Options > Auto send in the setup menu (081).

Image Transfer Interrupting Transmission/Removing Transfer Marking To cancel transmission of images marked with white or green transfer icons, select the images during playback and press J. The transfer icon will be removed. Any of the following actions will also interrupt transmission: • Turning the camera off • Selecting Yes for Network > Options > Deselect all? (083; this option also removes transfer marking from all images) D During Upload Do not remove the memory card or disconnect the Ethernet cable during upload. A Interval Timer Photography Upload will be interrupted if the standby timer expires while interval timer photography is in progress. Choose a long standby time before starting the interval timer. A Loss of Signal Wireless transmission may be interrupted if the signal is lost, but can be resumed by turning the camera off and then on again. A Turning the Camera Off “Send” marking will be saved if the camera or WT-7 is turned off while transmission is in progress. Transmission of images marked with a “send” icon will resume when the camera or WT-7 is turned on. A Destination Folders By default, images are uploaded to the following folders: • Windows: \Users\(user name)\Pictures\Wireless Transmitter Utility • Mac: /Users/(user name)/Pictures/Wireless Transmitter Utility The destination folder can be selected using the Wireless Transmitter Utility.

Image Transfer Transfer Status During playback, the status of images selected for upload is shown as follows: a: “Send” Images that have been selected for upload are marked with a white a icon. b: “Sending” A green b icon is displayed during upload. c: “Sent” Images that have been uploaded successfully are marked with a blue c icon. A Network Status The status of the link between the host and the WT-7 is shown by the status LEDs and by the display in the top level of the network menu. The Status LEDs Status POWER LINK ERROR WT-7 off I (off) I (off) I (off) USB cable not connected K (on) I (off) I (off) Connecting to host K (on) K (on) I (off) Waiting to send or sending data K (on) H (flashes) I (off) Connection error K (on) I (off) H (flashes) WT-7 hardware or battery malfunction H (flashes) H (flashes) H (flashes) The POWER LED lights when the WT-7 is on. Signal quality is shown by the LINK LED: the faster the LED flashes, the better the signal and the faster data can be transmitted. The ERROR LED flashes to show that an error has occurred.

Image Transfer The Status Display Network status can also be viewed in the top level of the network menu. Signal strength: Wireless signal strength. Ethernet connections are shown by d. Status area: The status of the connection to the host. The host name is displayed in green when a connection is established. While files are being transferred, the status display shows “Now sending” preceded by the name of the file being sent. Any errors that occur during transfer are also displayed here (0100). e, f: The estimated time required to send the remaining images. Battery level: The charge state of the battery in the WT-7.

Camera Control Camera Control Select this option to control the camera from a computer running Camera Control Pro 2 (available separately) and save photographs directly to the computer hard disk instead of the camera memory card (movies will still be saved to the camera memory card; insert a memory card before shooting movies). Note that the camera standby timer do not turn off when the camera is in camera control mode. 1 Display network profiles. In the setup menu, select Network > Network settings to display the profiles list. Camera control profiles are indicated by a L icon. Highlight a profile and press J to select the highlighted profile and return to the network menu. The profile name will be displayed in green when a connection is established. 2 Start Camera Control Pro 2. Start the copy of Camera Control Pro 2 (available separately) installed on the host computer. For information on using Camera Control Pro 2, see the Camera Control Pro 2 manual (pdf).

Camera Control A Ethernet Networks Do not disconnect the Ethernet cable while the camera is on. D Wireless Networks Operations may take longer on wireless networks. If the signal is disrupted while pictures are being transferred to Camera Control Pro 2, the LED on the WT-7 will flash orange; turn the camera off and then on again. Transfer will resume when the connection is re-established. Note that transfer can not be resumed if you turn the camera off again before transfer is complete. A Network Status The status of the link between the host and the WT-7 is shown by the status LEDs and by the display in the top level of the network menu. The Status LEDs Status POWER LINK ERROR WT-7 off I (off) I (off) I (off) USB cable not connected K (on) I (off) I (off) Connecting to host K (on) K (on) I (off) Waiting to send or sending data K (on) H (flashes) I (off) Connection error K (on) I (off) H (flashes) WT-7 hardware or battery malfunction H (flashes) H (flashes) H (flashes) The POWER LED lights when the WT-7 is on. Signal quality is shown by the LINK LED: the faster the LED flashes, the better the signal and the faster data can be transmitted. The ERROR LED flashes to show that an error has occurred.

Camera Control The Status Display Network status can also be viewed in the top level of the network menu. Signal strength: Wireless signal strength. Ethernet connections are shown by d. Status area: The status of the connection to the host. The host name is displayed in green when a connection is established. Any errors that occur during transfer are also displayed here (0100). Battery level: The charge state of the battery in the WT-7.

HTTP Server HTTP Server Select HTTP server to view the pictures on the camera memory card or take photographs from the web browser on a computer or iPhone (see page 42 for system requirements). Up to five users can access the camera at one time, although only one can take photographs. Note that the exposure meters do not turn off automatically when the camera is in http server mode. 1 Display network profiles. In the setup menu, select Network > Network settings to display the profiles list. HTTP server profiles are indicated by a M icon. Highlight a profile and press J to select the highlighted profile and return to the network menu. The URL used for connection to the camera is displayed when a connection is established. 2 Launch the web browser on the computer or iPhone.

HTTP Server 3 Enter the camera URL. Enter the camera URL (“http://” followed by the camera IP address, as shown in the network menu) in the browser window address field.

HTTP Server 4 Log in. Enter your user name and password in the web browser login dialog (the user name and password are set using Network > Options > HTTP user settings in the network menu as described on page 83; the default user name is “nikon” while the default password is blank). 5 Choose a language. 6 Choose an operating mode. Choose Shooting/Viewer to take pictures (043, 47) and Shooting/Viewer or Viewer to view existing pictures (045, 49). Up to five users at a time can connect using Viewer, but only one user at a time can connect using Shooting/Viewer (if another user is already connected using Shooting/Viewer, Shooting/Viewer will not be displayed and only four users will be able to connect using Viewer).

HTTP Server A Network Status The status of the link between the host and the WT-7 is shown by the status LEDs and by the display in the top level of the network menu. The Status LEDs Status POWER LINK ERROR WT-7 off I (off) I (off) I (off) USB cable not connected K (on) I (off) I (off) HTTP server starting up K (on) K (on) I (off) HTTP server in operation K (on) H (flashes) I (off) Connection error K (on) I (off) H (flashes) WT-7 hardware or battery malfunction H (flashes) H (flashes) H (flashes) The Status Display Network status can be viewed in the top level of the network menu. The POWER LED lights when the WT-7 is on. Signal quality is shown by the LINK LED: the faster the LED flashes, the better the signal and the faster data can be transmitted. The ERROR LED flashes to show that an error has occurred. Signal strength: Wireless signal strength. Ethernet connections are shown by d. Status area: The status of the connection to the host. The camera URL is displayed in green when a connection is established. Errors are also displayed here (0100). Battery level: The charge state of the battery in the WT-7.

HTTP Server A HTTP Server System Requirements Operation has been confirmed with the following systems: Windows OS Windows 10, Windows 8.1, Windows 7 Browser • Windows 10: Microsoft Edge • Windows 8.1: Internet Explorer 11 • Windows 7: Internet Explorer 10 Monitor • Resolution: 1,024 × 768 pixels (XGA) or more; 1,280 × 1,024 pixels (SXGA) or more recommended • Color: 24-bit color (True Color) or more Mac OS OS X version 10.11, 10.10, or 10.9 Browser • OS X version 10.11: Safari 9 • OS X version 10.10: Safari 8 • OS X version 10.9: Safari 7 Monitor • Resolution: 1,024 × 768 pixels (XGA) or more; 1,280 × 1,024 pixels (SXGA) or more recommended • Color: 24-bit color (millions of colors) or more iPhone OS iOS 9, iOS 8 Browser The version of Safari included with the operating system

HTTP Server Computer Web Browsers This section describes the http server displays for computer web browsers (note that the display varies with the model of camera). Click to adjust camera settings. For information on the displays for iPhones, see page 47. The Shooting Window The following controls can be accessed by selecting Shooting/ Viewer on the server home page. To display the view through the camera lens in the viewfinder area, click the live view button. Click the button again to exit live view. A Movie Live View The information at right appears in the camera settings area (044) in movie live view. Display panel (044) Camera settings (044) Exposure mode Test button (044) Shutter button (044) Still photography/movie button Logout button Home button Shoot button Zoom buttons Focus buttons Live view button Viewfinder View button (045) Resolution (live view)

HTTP Server Display panel Contains the exposure indicator and shows the battery level and number of exposures remaining. Camera settings Settings for still photography and movie recording can be adjusted by clicking the icons in the camera settings panel. See the camera manual for more information. Shutter button Take a photograph or start and end movie recording. To focus, click the desired subject in the viewfinder area. Test button Take a test photo and display it in the viewfinder without recording it to the camera memory card. Not available in movie live view. A Focus Buttons The size of the focus adjustment increases with the distance of the button from the center of the display. Small Large

HTTP Server The Viewer Window The viewer window can be accessed by selecting Viewer on the server home page or clicking the view button in the shooting window. The viewer window for computer web browsers offers a choice of thumbnail, film-strip (046), and full-frame views (046). ❚❚Thumbnail View View multiple small (“thumbnail”) images per page. The controls at the top of the window can be used for navigation. A Navigation Controls Navigation controls Thumbnails (click to view pictures full frame). Movies are indicated by 1. Page number Full-frame view (046) Film-strip view (046) Thumbnail view View most recent picture in folder Thumbnails per page Page controls Folder selection

HTTP Server ❚❚Film-Strip View Choose the picture displayed from the thumbnails at the bottom of the window. ❚❚Full-Frame View View pictures full frame. Current picture (click H or F to view additional pictures) Copy current picture to computer Thumbnails (click to select) Current picture (click H or F to view additional pictures) Copy current picture to computer

HTTP Server iPhone Web Browsers This section describes the http server displays for iPhone web browsers (note that the display varies with the model of camera). Tap to adjust camera settings. For information on computer displays, see page 43. The Shooting Window The following controls can be accessed by selecting Shooting/ Viewer on the server home page. Use the live view button to start live view photography (C) or movie live view (1). The view through the camera lens will be displayed in the viewfinder area. To exit live view, use the live view button to turn live view off. Display panel (044) Shutter button (044) Logout button Home button Shoot button Exposure mode View button (049) Zoom buttons Camera settings (044) Viewfinder (tap to focus on selected subject) Live view button Camera settings (044)

HTTP Server A The Live View Button Tap to choose from live view off, photo live view, and movie live view. A Movie Live View The information at right appears in the camera settings area (044) in movie live view.

HTTP Server The Viewer Window The viewer window can be accessed by selecting Viewer on the server home page or tapping the view button in the shooting window. The viewer window for iPhone web browsers offers a choice of thumbnail and full-frame views (050). ❚❚Thumbnail View View multiple small (“thumbnail”) images per page. The controls at the top and bottom of the thumbnail area can be used for navigation. Thumbnails (tap to view pictures full frame). Movies are indicated by 1. Next page Thumbnails per page Page number Previous page View most recent pictures in folder Folder selection

HTTP Server ❚❚Full-Frame View View pictures full frame. Current picture (tap to return to thumbnail view) Show next image Show previous image View most recent picture in folder Thumbnail view

network. For information on wireless connections, see page 57. Ethernet Connections FTP server Step 1: Connect the camera, WT-7, and ftp server (052) Step 2: Select Ethernet (053) Step 3: Run the connection wizard (054) Transfer pictures (070) D Choosing a Power Source To prevent the camera or WT-7 powering off unexpectedly during setup or data transfer, use fully-charged batteries or optional AC adapters designated for use with the camera or WT-7. For more on camera power sources, see the camera manual. A FTP Servers Servers can be configured using standard ftp services, such as IIS (Internet Information Services), available with supported operating systems (090). Connection to computers on other networks via a router, Internet ftp connections and ftp servers running third-party software are not supported.

After starting the ftp server, connect the camera as described below. 1 Insert a memory card. Turn the camera off and insert a memory card (do not turn the camera off or disconnect the Ethernet cable while data are being transferred to the computer). 2 Attach the WT-7 (04). 3 Connect an Ethernet cable. Connect the camera to the ftp server as shown below. Do not use force or insert the connectors at an angle. 4 Turn the camera on. Rotate the power switch to turn the camera on. 5 Press the power switch for about a second to turn the WT-7 on. Power switch

Ethernet Connections Configure the WT-7 for use with Ethernet networks. 1 Select Choose hardware. In the setup menu, select Network, then highlight Choose hardware and press 2. The menu offers a choice of Wired LAN and Wireless LAN. 2 Select Wired LAN. Highlight Wired LAN and press J to select the highlighted option and return to the network menu.

Follow the on-screen instructions to create a network profile. 1 Display network profiles. In the network menu, highlight Network settings and press 2 to display the profiles list and other network settings. 2 Select Create profile. Highlight Create profile and press 2. Note that if the list already contains nine profiles, you will need to delete an existing profile using the O (Q) button before proceeding (077). 3 Start the connection wizard. Highlight Connection wizard and press 2 to start the connection wizard. 4 Choose a connection type. Highlight FTP upload and press J.

Enter the name that will appear in the profile list and press J (to use the default name, press J without making any changes). Profile names can be up to 16 characters long. 6 Obtain or select an IP address. Highlight one of the following options and press J. • Obtain automatically: Select this option if the network is configured to supply the IP address automatically. • Enter manually: When prompted, enter an IP address and subnet mask by pressing 4 and 2 to highlight segments and 1 and 3 to change. Press J to proceed when entry is complete. 7 Choose the server type. Highlight FTP or SFTP (secure ftp) and press J. 8 Enter the IP address. Enter the server URL or IP address and press J to connect.

Highlight one of the following options and press J. • Anonymous login: Select this option if the server does not require a user ID or password. • Enter user ID: Enter a user ID and password when prompted and press J. 10 Choose a destination folder. Highlight one of the following options and press J. • Home folder: Select this option to upload pictures to the server’s home folder. • Enter folder name: Select this option to upload pictures to another folder (the folder must already exist on the server). Enter a folder name and path when prompted and press J. 11 Exit the wizard. Highlight one of the following options and press J. • Connect and exit wizard: Save the new network profile and connect to the server. • Exit wizard: Save the new network profile and exit. Proceed to “FTP Upload” (070).

FTP upload Step 1: Ready the camera and WT-7 (058) Step 2: Configure the hardware for wireless networks (059) Step 3: Run the connection wizard (060) Step 4: Adjust network settings (067) Transfer pictures (070) A Wireless LANs These instructions assume that the computer and wireless LAN access point are already connected to the network.

After starting the computer and logging in, ready the camera and WT-7 as described below. 1 Insert a memory card. Turn the camera off and insert a memory card (do not turn the camera off while data are being transferred to the computer). 2 Attach the WT-7 (04). 3 Turn the camera on. Rotate the power switch to turn the camera on. 4 Press the power switch for about a second to turn on the WT-7. Power switch

Ready the camera for connection to a wireless network. 1 Select Choose hardware. In the setup menu, select Network, then highlight Choose hardware and press 2. The menu offers a choice of Wired LAN and Wireless LAN. 2 Select Wireless LAN. Highlight Wireless LAN and press J to select the highlighted option and return to the network menu.

Follow the on-screen instructions to create a network profile. 1 Display network profiles. In the network menu, highlight Network settings and press 2 to display the profiles list and other network settings. 2 Select Create profile. Highlight Create profile and press 2. Note that if the list already contains nine profiles, you will need to delete an existing profile using the O (Q) button before proceeding. 3 Start the connection wizard. Highlight Connection wizard and press 2 to start the connection wizard. 4 Choose FTP upload (07). Highlight FTP upload and press J.

Enter the name that will appear in the profile list and press J (to use the default name, press J without making any changes). Profile names can be up to 16 characters long. 6 Choose a connection method. Highlight the connection method used by the network and press J. More information can be found on the pages listed below. Search for wireless network Choose from a list of networks detected by the camera. Proceed to page 62. Push-button WPS Choose for wireless LAN access points with push- button WPS. Proceed to page 64. PIN-entry WPS Choose for wireless LAN access points with PIN- entry WPS. Proceed to page 65. Direct connection (ad hoc) Connect directly to a host computer or ftp server in ad hoc mode (supported in Windows 7 only). Proceed to page 66.

Select Search for wireless network in Step 6 on page 61 to choose from a list of the networks (wireless LAN access points) detected by the camera. 1 Choose a network. Highlight a network SSID and press J (if the desired network is not displayed, press X to search again). If the selected network is encrypted (h), you will be prompted to enter the encryption key as described in Step 2. If the network is not encrypted, proceed to Step 3. The network type is indicated by the icons to the left of the ID: h Signal encrypted j/i Infrastructure/ad hoc A Hidden SSIDs Networks with hidden SSIDs are indicated by blank entries in the network list. If you select a network with a hidden SSID, you will be prompted to provide the network name; enter a name and press J to proceed to Step 2. SSID

Enter the encryption key and press J (if the network uses open authentication, this dialog will not be displayed; proceed to Step 3). 3 Choose your next step. The message at right is displayed when a connection is established. Proceed to page 67.

if the wireless LAN access point uses push-button WPS. 1 Press the WPS button on the wireless LAN access point. For more information, see the documentation provided with the wireless LAN access point. 2 Press J button on the camera. The camera will connect to the access point automatically. 3 Choose your next step. The message at right is displayed when a connection is established. Proceed to page 67.

in Step 6 on page 61 if the wireless LAN access point uses PIN-entry WPS. 1 Enter the PIN for the wireless LAN access point. From a computer, enter the PIN for the wireless LAN access point. For more information, see the documentation provided with the wireless LAN access point. 2 Press J button on the camera. The camera will connect to the access point automatically. 3 Choose your next step. The message at right is displayed when a connection is established. Proceed to page 67.

To connect directly to an ftp server or computer in ad hoc mode, select Direct connection (ad hoc) in Step 6 on page 61. 1 Enter the SSID. Enter a network name (SSID) and press J. The default name is “WT” followed by the MAC address of the WT-7. 2 Enter the encryption key. Enter an encryption key and press J (the default key is “nikon”). Proceed to page 67.

Follow the steps below to connect to the ftp server. 1 Obtain or select an IP address. Highlight one of the following options and press J. • Obtain automatically: Select this option if the network is configured to supply the IP address automatically. The camera will display the IP address provided by the network; press J to proceed. • Enter manually: When prompted, enter an IP address and subnet mask by pressing 4 and 2 to highlight segments and 1 and 3 to change. Press J when entry is complete. The camera will display the selected IP address; press J to proceed. 2 Choose the server type. Highlight FTP or SFTP (secure ftp) and press J.

Enter the server URL or IP address and press J to connect. 4 Log in. Highlight one of the following options and press J. • Anonymous login: Select this option if the server does not require a user ID or password. • Enter user ID: Enter a user ID and password when prompted and press J. A MAC Address Filtering If the network uses MAC address filtering, the filter must be supplied with the MAC address of the WT-7. After attaching the WT-7 to the camera, choose Network > Options > MAC address from the camera setup menu and note the MAC address.

Highlight one of the following options and press J. • Home folder: Select this option to upload pictures to the server’s home folder. • Enter folder name: Select this option to upload pictures to another of the folders existing on the server. Enter a folder name and path when prompted and press J. 6 Exit the wizard. Highlight one of the following options and press J. • Connect and exit wizard: Save the new network profile and connect to the server. • Exit wizard: Save the new network profile and exit. Proceed to “FTP Upload” (070).

to an ftp server as described below, or photos can be uploaded as they are taken. For information on setting up an ftp server, see page 90. 1 Display network profiles. In the setup menu, select Network > Network settings to display the profiles list. FTP server profiles are indicated by a N icon. Highlight a profile and press J to select the highlighted profile and return to the network menu. The profile name will be displayed in green when a connection is established.

Press the K button to view pictures. Display the first picture to be sent full frame or highlight it in the thumbnail list. 3 Upload pictures. Press J. A white transfer icon will appear on the picture and upload will begin immediately. The transfer icon turns green during upload, and turns blue when upload is complete. Additional pictures will be uploaded in the order selected. To upload a picture that has already been uploaded once, press J once to remove the blue transfer icon, and then press J again to mark the image with a white transfer icon.

To upload new photographs as they are taken, select On for Network > Options > Auto send in the setup menu (081). Interrupting Transmission/Removing Transfer Marking To cancel transmission of images marked with white or green transfer icons, select the images during playback and press J. The transfer icon will be removed. Any of the following actions will also interrupt transmission: • Turning the camera off • Selecting Yes for Network > Options > Deselect all? (083; this option also removes transfer marking from all images) D During Upload Do not remove the memory card or disconnect the Ethernet cable during upload. A Interval Timer Photography Upload will be interrupted if the standby timer expires while interval timer photography is in progress. Choose a long standby time before starting the interval timer. A Loss of Signal Wireless transmission may be interrupted if the signal is lost, but can be resumed by turning the camera off and then on again. A Turning the Camera Off “Send” marking will be saved if the camera or WT-7 is turned off while transmission is in progress. Transmission of images marked with a “send” icon will resume when the camera or WT-7 is turned on.

as follows: a: “Send” Images that have been selected for upload are marked with a white a icon. b: “Sending” A green b icon is displayed during upload. c: “Sent” Images that have been uploaded successfully are marked with a blue c icon. A Network Status The status of the link between the host and the WT-7 is shown by the status LEDs and by the display in the top level of the network menu. The Status LEDs Status POWER LINK ERROR WT-7 off I (off) I (off) I (off) USB cable not connected K (on) I (off) I (off) Connecting to host K (on) K (on) I (off) Waiting to send or sending data K (on) H (flashes) I (off) Connection error K (on) I (off) H (flashes) WT-7 hardware or battery malfunction H (flashes) H (flashes) H (flashes) The POWER LED lights when the WT-7 is on. Signal quality is shown by the LINK LED: the faster the LED flashes, the better the signal and the faster data can be transmitted. The ERROR LED flashes to show that an error has occurred.

Network status can also be viewed in the top level of the network menu. Signal strength: Wireless signal strength. Ethernet connections are shown by d. Status area: The status of the connection to the host. The host name is displayed in green when a connection is established. While files are being transferred, the status display shows “Now sending” preceded by the name of the file being sent. Any errors that occur during transfer are also displayed here (0100). e, f: The estimated time required to send the remaining images. Battery level: The charge state of the battery in the WT-7.

for the Network option in the camera setup menu when the WT-7 is connected. Choose the hardware used to connect to the network: Ethernet (Wired LAN) or wireless LAN (Wireless LAN). Choose Hardware

Network Settings Network Settings Highlight Network settings and press 2 to display the network profiles list, where you can create new profiles or select an existing profile. The Profile List The camera can store up to nine network profiles. Highlight a profile and press 2 to connect to the highlighted host computer or ftp server, or press O (Q) to delete the highlighted profile (077). To view information on the highlighted profile, press L (Z/Q). To edit the highlighted profile, press W (078). Create Profile Choose Connection wizard to create network profiles with the help of a wizard (012, 20, 54, 60), Configure manually to enter ftp and http server settings manually (098). Connection type (07) Profile name (013, 21, 55, 61, 78) SSID (wireless connections only)

This option is available only with ftp and http server connections. Select Copy profile from card to copy profiles from the memory card to the profile list. Selecting Copy profile to card displays the camera profile list; highlight a profile and press J to copy the profile (excluding the encryption key and ftp password) to the card (password-protected profiles can not be copied; 078). If there are two memory cards inserted in the camera, the card in the primary slot will be used for both “copy from” and “copy to” operations. Deleting Network Profiles Press O (Q) to delete the profile currently highlighted in the profile list. A confirmation dialog will be displayed; highlight Yes and press J.

Network Settings Editing Network Profiles To edit network profiles, highlight the profile in the profile list, press W, and choose from the following options: ❚❚General Choose Profile name to edit the profile name, Password protection to enter a profile password and enable or disable password protection. Enabling password protection prevents others from viewing network settings. General Edit the profile name and password. Wireless Edit wireless settings (wireless connections only; 079). TCP/IP Edit TCP/IP settings (080). FTP Edit ftp settings (080). D Editing Profiles If the shutter-release button is pressed while menus are displayed, the monitor will turn off and any changes to the current profile will be lost.

• SSID (required): Enter the name (SSID) of the network on which the host computer or ftp server is located. • Communication mode: Select Infrastructure for wireless communication via a wireless network access point, Ad hoc if the camera is connected to the ftp server or computer directly. • Channel: Select a channel (ad hoc only; in infrastructure mode, the channel will be selected automatically). • Authentication: The authentication used on the network. Choose from open system, shared key, WPA-PSK, and WPA2-PSK (infrastructure) or open system and shared key (ad hoc). • Encryption: The encryption used on the network. The options available depend on the authentication used: Open: None; 64- or 128-bit WEP Shared: 64- or 128-bit WEP WPA-PSK: TKIP; AES WPA2-PSK: AES • Encryption key: If the network uses encryption, enter the network key. The number of characters required depends on the type of key used: • Key index: If WEP64 or WEP128 is selected for Encryption in infrastructure mode, choose a key index matching that used by the access point or host computer. A key index is not required when No encryption is selected. WEP (64-bit) WEP (128-bit) TKIP, AES Number of characters (ASCII) 5 13 8–63 Number of characters (hex) 10 26 64

Network Settings ❚❚TCP/IP If the network is configured to supply IP addresses automatically, select Enable for Obtain automatically. Otherwise select Disable and enter the following information: • Address/Mask: Enter an IP address and subnet mask. • Gateway: If the network requires a gateway address, select Enable and enter the address supplied by the network administrator. • Domain Name Server (DNS): If a Domain Name Server exists on the network, select Enable and enter the address supplied by the network administrator. ❚❚FTP Edit the following ftp settings: • Server type: Choose ftp or sftp and enter the URL or IP address (required), destination folder, and port number. • PASV mode: Select Enable to enable PASV mode. • Anonymous login: Select Enable for anonymous login, or select Disable to supply a User ID and Password. • Proxy server: If a proxy server is required for ftp, select Enable and enter the address and port number for the proxy server.

Auto Send If On is selected for image transfer or ftp server connections, photos will automatically be uploaded to the computer or ftp server as they are taken (note, however, that photos can only be taken when a memory card is inserted in the camera). Movies can not be uploaded using this option; transfer movies during playback as described on pages 30 and 70. Delete After Send Select Yes to delete photographs from the camera memory card automatically once upload is complete (image transfer and ftp server connections only; files marked for transfer before this option is selected are unaffected). Regardless of the option selected for file number sequence in the camera Custom Settings menu, sequential number is used while this option is in effect, even if the folder changes or the memory card is replaced. Deletion may be suspended during some camera operations. Send File As When transferring NEF+JPEG images to a computer or ftp server (image transfer and ftp server connections only), choose whether to upload both the NEF (RAW) and JPEG files or only the JPEG copy.

Options Overwrite If Same Name Choose Yes to overwrite files with duplicate names during upload to an ftp server, No to add numbers to the names of newly uploaded files as necessary to prevent existing files being overwritten. Protect If Marked for Upload Select Yes to automatically protect files marked for upload to an ftp server. Protection is removed as the files are uploaded. Send Folder Select a folder for upload (image transfer and ftp server connections only). All photos in the selected folder (including those already marked as “sent”) will be uploaded, beginning immediately. Movies can not be uploaded using this option; transfer movies during playback as described on pages 30 and 70.

all images selected for upload to a computer or ftp server (image transfer and ftp server connections only). Upload of images with a “sending” icon will immediately be terminated. HTTP User Settings Enter a user name and password for connection to an http server (http server connections only). Battery Info Display information for the battery inserted in the WT-7. The five-level Battery age display shows the battery age: 0 indicates that battery performance is unimpaired, 4 that the battery has reached the end of its charging life and requires replacement.

Options Auto Power off Delay Choose how long the WT-7 remains on once the camera has turned off or the USB connection to the camera is terminated. MAC Address Display the MAC address of the hardware selected for Choose hardware (075). Firmware Version View the current WT-7 firmware version.

then automatically be configured for wireless connection (note that Windows 7 is required if you wish to use this option in ad-hoc mode). 1 Enable copying. When the connection wizard prompts you to choose whether to copy the profile to a computer (027), highlight Yes and press J. 2 Connect the camera to the computer. When prompted, connect the camera to the computer using the USB cable supplied with the camera. 3 Start the Wireless Transmitter Utility. When prompted, start the copy of the Wireless Transmitter Utility installed on the computer (05). Copying Profiles

Choose an adapter from the pull-down menu and click Next. If Image transfer or Camera control is selected, the Wireless Transmitter Utility will automatically pair the camera and computer.

The camera will display the message shown at right when the process is complete. After disconnecting the USB cable from the computer and connecting it to the WT-7, exit the Wireless Transmitter Utility. The camera will display the options shown at right; choose an option to exit the wizard. D Ad Hoc Mode The camera will not automatically connect in ad hoc mode. Choose the network profile on the computer before connecting.

Creating Profiles on a Computer The Wireless Transmitter Utility (05) can be used to create network profiles. 1 Connect the camera. Start the computer and connect the camera using the USB cable supplied with the camera. 2 Turn the camera on. Rotate the power switch to turn the camera on.

3 Start the Wireless Transmitter Utility. Double-click the Wireless Transmitter Utility icon on the desktop (Windows) or click the Wireless Transmitter Utility icon in the Dock (Mac). 4 Create a profile. Follow the on-screen instructions to create a network profile.

Creating an FTP Server Images can be uploaded to ftp servers created using the standard ftp services included with Windows 10 (Enterprise/Pro/Home), Windows 8.1, Windows 8.1 (Enterprise/Pro), and Windows 7 (Professional/Enterprise/Ultimate). Under Windows, Internet Information Services (IIS) are required to configure ftp servers (installation instructions are available from Microsoft). The following settings are used below for illustrative purposes: 1 Go to Network and Sharing Center. Click Control Panel > Network and Internet > Network and Sharing Center. 2 Display the network adapter list. Click Change adapter settings. IP address: 192.168.1.3 Subnet mask: 255.255.255.0 ftp server port: 21 ftp server