Teletek electronics SIMPO Basic Information
Text of the manual
SIMPO - BASIC INFORMATION
Page 2 of 48
Simpo Addressable Panel
Addressable Fire alarm Panel: Simpo
1.) Technical specification
Loops:
• Up to 2 – both built in the main PCB. The second is with additional PCB mounted
over the main PCB (on special terminals).
• Earth fault detection – enabling and disabling from the panel (Software).
Number of devices
SIMPO - BASIC INFORMATION
Page 3 of 48
Simpo Addressable Panel
• Access level 4 is only for authorized personal, which has knowledge to update the
panel’s software. Access can be obtained by means of special tool (screwdriver,
mechanical key-switch or external programmer).
Inputs:
• Input 1 – Alarm Confirmation - meets VdS 2540
• Input 2 – Protec
SIMPO - BASIC INFORMATION
Page 4 of 48
Simpo Addressable Panel
Programming and configuration:
• The panel can be programmed and configured using the buttons on the front
panel.
• The panel can be programmed via software ProsTE of Teletek-Electronics with
direct PCB serial connection.
• Possibility of remote programming and controlling with AJAX LAN/GPR
SIMPO - BASIC INFORMATION
Page 5 of 48
Simpo Addressable Panel
Box:
• Metal enclosure box
• Surface mount
• Dimensions: L365xH412xW78
Standards:
• Designed according to EN-54/2, EN-54/4
• The panel will be certified according to EN-54/2
Packing:
• Plastic bag
• Carton box – white, without printings
• Sticker box – metalized
Boxset:
• Us
