TechniSat SkyFunk 4 Operating Manual
Text of the manual
2,4 GHz wireless transmission system
for 2 signal sources
With 4 channels for audio and video transmission
and 16 channels for transmission of remote control
signals.
Topic . . . . . . . . . . . . . . . . . . . . . . . . . . .Page
1
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . .2
2
General . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3
Connections . . . . . . . . . . . . . . . . . . . . . . . . .4
4
Setting up the units . . . . . . . . . . . . . . . . . . .6
5
Operation .
During a thunderstorm, or when the unit is not being used for
an extended period of time, please disconnect the equipment
from the mains power supply.
Before installing and operating the equipment,
please check you have received all compo-
nents!!!
The package contains the following items:
1 SkyFunk 4 transmitter
1 SkyFunk 4 receiver
2 mains
3 Connecting the SkyFunk 4 system
CCeeeeeConnecting the
>
Connect the cinch connec-
tor of the Scart-cinch adapter cable marked Sender
with the SkyFunk 4 transmitter. Please ensure that
jacks and sockets of the same colour are connected
with each other.
>
Connect the Scart connector of the adapter cable
marked Sender with the Scart socket of the 1.
video/a
Connect the cinch connector of the Scart-cinch adap-
ter cable supplied marked Receiver with the Sky-
Funk 4 receiver.
Please ensure that jacks and sockets of the same
colour are connected with each other.
>
The SkyFunk receiver should be positioned so that
the red IR sensor has a direct line of sight to the
remote control. This is essential to ensure the
