Technaxx TX-75 Operation & User’s Manual

Wireless Door Viewer TX-75 Digital door viewer with built-in camera and 3.5" desk monitor This device complies with the requirements of the standards referred to the Directive R&TTE 1999/5/EC. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using the device the first time, read the user manual carefully. This device has a rechargeable battery. It must be fully charged before first use. NOTE: Charge the battery of the device every 2–3 month if it is not used! Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line and 42 cent/minute from mobile networks). Free Email: [email protected] Features � Doorbell function � Photo taking & Photo preview � Data backup up to 100 photos (built-in storage) � Portable desk monitor with 3.5" screen � Camera with 300000 pixel & 170° wide angle view � 2.4GHz wireless transmission ~200m open areas � Power saving function � USB charging function � IP32 camera protection class (dripping water & <2.5mm impurity) � "Do-it-yourself" installation, camera placement in peephole Battery and Charge ● Be sure of the activity of the battery, please fully charge the new battery. ● When the outdoor unit is at low power, the lamp of emitter would flash. It remains you to charge. ● The battery of outdoor emitter can be changed or charged by USB. The green light keeps bright. ● When the handset is at low power (≤ one bar), the red indicator lamp will flash every second, please charge immediately. ● The handset can be charged by the USB line, green light keeps bright. ● Charge-and-work supported. When the battery is charged fully, it auto stops charging. ● Always use the speccified battery type if needs replacement. Note: Under low power, display, photo-taking functions cannot work properly.

Camera / Lens 300000 pixels & 170° wide-angle Power supply Replaceable rechargeable lithium battery 7800mAh (type 18650) Charging time ~12 hours Working time ~39 hours continuously Standby time ~52 days (monitoring mode) ~1 year (power saving mode) � charge the battery min. every 6 month Power Consumption 160mA External power DC 5V / 1A Operating temperature –10°C up to +50°C Material Metal / ABS Weight / Dimensions 280g / outline dimensions 3.6 x 0.8cm Desk Monitor (Handset) Screen 3.5" TFT colour LCD screen Picture format JPEG Radio transmission 2.4GHz wireless connection mode Wireless transmission ~200m in open areas Power supply Replaceable rechargeable lithium battery 1100mAh (type BP-6M) Charging time ~3 hours Working time ~5 hours continuously Standby time ~6 days Power Consumption 200mA External power DC 5V / 1A Desk charger for the monitor Operating temperature 0°C up to +40°C Weight / Dimensions 110g / outline dimensions 12.6 x 8.4 x 2.0cm Package Contents Camera (wireless transmission), Emitter (providing the camera with power), 3.5" desk monitor (wireless reception), Desk charger for the monitor, USB cable, Power charger DC 5V, Lithium 7800mah battery type 18650, Lithium 1100mAh battery type BP-6M, Screw M4, Steel board, Round steel board, User Manual

1 doorbell button of the outdoor camera: Press this button to call. (BLUE LED: shall be on when ring the bell) Emitter 1 USB charging Port 4 Connector 2 Start 5 LED (see following picture) 3 Monitoring mode Non-monitoring mode (Power saving mode) 6 Code match key (see following picture) 3 keys of the Emitter: 1. ON/OFF (Power saving or non-saving power) Mode select key: ON: Monitor mode (Can monitor outside from handset). OFF: Non- monitor mode (Power saving mode, cannot monitor from handset by pressing “OK” button. After choosing mode, please start up the emitter to confirm. 1 Camera 3 Back side adhesive tape 2 Doorbell button 4 Connection Cable

3. Match code key “Reset”: To match code with the indoor handset, incorrect using this button may make device work improperly. Indoor Monitor (Indoor Handset) 1 Switch on/off, match code 5 Photo shooting/Delete 2 USB port 6 Working indicator 3 Charge indicator 7 3.5 inch display 4 Preview 8 OK 4 keys of the indoor monitor (handset): 1. Turn on/ off key: Hold press to switch on or off handset; Press once to match code when screen is on. 2. Photo shooting / Delete key: Press once to take a photo. Hold and press to delete all photos. 3. Preview: Press to preview the photo(s). 4. OK Monitor key: In standby mode, press once, screen on. When screen is on, press again, screen off. In monitoring mode, press to monitor outside from handset.

battery pack type 18650), charge both devices (see chapter Battery and Charge) and test the device. For charging the monitor with the table charger, pop up the stand of the handset and insert it into the table charger. Otherwise the handset will not be charged. Also you have to connect the table charger with included USB cable or the included charger. Installation Guide 1. Outdoor unit shall be installed at 1.4m~1.7m above the floor. 2. The product is applicable to the door hole Ø 14~30mm, door thickness 40~95mm. 3. The outdoor camera should not be hidden or blocked by other objects. 4. Do not face outdoor unit to sunlight directly. 5. Install the connection wire correctly, otherwise, normal use shall be failure. Installation Steps Warning: Flexible connection wire is a kind of flexible material, be sure to install it carefully. Do not pull it with force and avoid being injured by sharp metal parts. Choose a screw (Screw length should be, at least, 5mm less than door thickness.) Mount screw. Tear adhesive front paper.