Philips EP5934 Operation & User’s Manual

overflowed which makes it look like the machine is leaking. Empty the drip tray when the 'drip tray full' indicator pops up through the drip tray cover. Place the espresso stand under the dispensing spout to collect rinsing water. The machine is not placed on a horizontal surface. Place the machine on a horizontal surface so that the 'drip tray full' indicator works properly. Milk is leaking from the milk container. You did not assemble LatteGo properly. Make sure that the milk container is properly assembled to the frame of LatteGo. I c ...

221 x 340 x 430 mm Weight 7.6 kg Power cord length Control panel front Cup size up to 145 mm Water tank 1.8 litres, removable Coffee bean hopper capacity 250 g Coffee grounds container capacity 15 pucks Milk carafe capacity 265 ml Pump pressure 15 bar Boiler stainless steel boiler Safety devices thermal fuse Energy saving mode < 1 Wh Nominal voltage - Power rating - Power supply See data plate on inside of service door 24 English Technical specifications The manufacturer reserves the right to improve the technical specifications of the product. All the preset quantities are ap ...

Brewing coffee with beans 1 Fill the water tank with tap water and fill the bean hopper with beans. 2 To brew a coffee, press one of the one-touch drink buttons. To select another type of coffee, press the MENU button, select DRINKS, scroll down to the desired drink and press the OK button ( ). 3 To stop dispensing coffee, press the OK button ( ). Brewing milk-based drinks LatteGo consists of a milk container, a frame and a storage lid. To avoid leakage, make sure the frame and the milk container are properly assembled as described below before you fill the milk container ...

4219.460.4343.1 PHI5000 COCO COVER_FRONT-BACK_A5_WE.indd 2 19/02/2018 14:04 ...

brew group. The brew group is not in the correct position. Reset the machine in the following way: place back the drip tray and the coffee grounds container. Then close the service door and switch the machine off and back on again. Try again to remove the brew group. You have not removed the coffee grounds container. Remove the coffee grounds container before you remove the brew group. I cannot insert the brew group. The brew group is not in the correct position. Reset the machine in the following way: place back the drip tray and the coffee grounds c ...

brew group. The brew group is not in the correct position. Reset the machine in the following way: place back the drip tray and the coffee grounds container. Then close the service door and switch the machine off and back on again. Try again to remove the brew group. You have not removed the coffee grounds container. Remove the coffee grounds container before you remove the brew group. I cannot insert the brew group. The brew group is not in the correct position. Reset the machine in the following way: place back the drip tray and the coffee grounds c ...

support that Philips offers, please register your product at www.philips.com/welcome. Read the separate safety booklet carefully before you use the machine for the first time and save it for future reference. To help you get the best out of your coffee machine, Philips offers full support in 3 different ways: 1 The separate quick start guide for first installation and first use. 2 This user manual for more detailed information. 3 Online support and movies: scan the QR code on the ...