Vicon VM-717LCD Installation And Operation Manual

19 VM-717/719LCD Monitors XX-198-00 Blue Screen Setting the Blue Screen to On will display a blue background Select Blue Screen On or Off and press Enter. ...

19 VM-717/719LCD Monitors XX-198-00 Blue Screen Setting the Blue Screen to On will display a blue background Select Blue Screen On or Off and press Enter. ...

XX-198-00 VM-717/719LCD Monitors Picture Mode Select the desired Picture mode using the options shown in the right menu pane. Dynamic will provide enhanced contrast and sharpness. Standard provides standard contrast and sharpness. Movie is recommended for viewing film-based content. Mild reduces contrast and sharpness. Press SOURCE/Select to save your selection. ...

XX-198-00 VM-717/719LCD Monitors Picture Mode Select the desired Picture mode using the options shown in the right menu pane. Dynamic will provide enhanced contrast and sharpness. Standard provides standard contrast and sharpness. Movie is recommended for viewing film-based content. Mild reduces contrast and sharpness. Press SOURCE/Select to save your selection. ...

XX-198-00 VM-717/719LCD Monitors Power Management This monitor features a power management system to “power down” upon receipt of the VESA DPMS (the display power management signal) from a VESA DPMS video card. Upon PC power down, the VESA DPMS-compliant video card ceases sending horizontal, vertical, or sync signals. The monitor senses the absence of these signals and enters "sleep" mode. Power Consumption Mode Power Consumption On Less than 50 W Standby Less than 11 W Suspend Less than 11 W Active Off Less than 8 ...

XX-198-00 VM-717/719LCD Monitors Troubleshooting Trouble Probable Cause No image on screen 1. Check that power cord is securely connected to monitor and power source. 2. Ensure that Power switch is on and LED is lit. 3. Check that Brightness and/Contrast levels have not been turned down to minimum levels. 4. Check that the correct input is selected. "Going to Sleep" message on screen 1. Ensure the signal cable is securely connected to the video card connector on the PC. 2. Ensure that the video card is firmly seated in ...

XX-198-00 VM-717/719LCD Monitors Key Lock Key Lock prevents the OSD from displaying and allowing users to change settings. Select Key Lock On and press Enter. To unlock the monitor, press SOURCE+MENU simultaneously for approximately 5 seconds. ...

25 VM-717/719LCD Monitors XX-198-00 Technical Specifications Electrical Input Voltage: 100 – 240 VAC, 50/60 Hz. Voltage converter included provides 12 VDC to monitor. Current: VM-717LCD: 3 A nominal. VM-719LCD: 3.5 A nominal. Power Consumption: VM-717LCD: 36 W nominal. VM-719LCD: 42 W nominal. Video Screen Size: VM-717LCD: 17" AM-TFT (Active-Matrix). VM-719LCD: 19" AM-TFT (Active-Matrix). Resolution: 1280 (H) X 1024 (V) @60 Hz Pixel Pitch: VM-717LCD: 0.264 (H) X 0.264 (V) mm VM-719LCD: 0.294 (H) X 0.294 (V) mm Brightness: ...