Topeak HEXUS X Operation & User’s Manual

Use Primary Chain Link Fence to install or remove chain pin. Use Secondary Chain Link Fence to loosen stiff links. Primary Chain Link Fence Secondary Chain Link Fence 4mm Allen key WARNING Chain Pin Tool Press chain pin as little as necessary to loosen the stiff link. 4mm for chain pin breaker + + 15g 14g USING CHAIN TOOL HEXUS™ X USER'S GUIDE Tire Lever Air Pressure Release Button Presta Core tool EN 8 mm 5 mm 6 mm 5 mm 4 mm 4 mm 4 mm 3 mm 4 mm 2.5 mm 2 mm Phillips T15 T25 T30 2 mm 4 mm 2.5 mm Chain Hook T25 Torx T30 Torx Chain pin breaker 6 mm 3 mm 5 mm Phillips Chain Tool 8 mm T25 T15 When pressing in the chain pin, push down on the top of the chain to keep it fully engaged in the chain tool cradle. Make sure the press pin of the chain tool is centered against the chain pin. Inspect chain rivet again and be sure chain links can bend freely after replacement. * The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo® 11 speed hollow pin chains.

USING TIRE LEVERS BUILT-IN PRESTA CORE TOOL USING AIR PRESSURE RELEASE BUTTON TOOL MAINTENANCE Use T25 Torx bit on tire lever to adjust the folding resistance. USING CHAIN HOOK AND CHAIN TOOL 4 mm Allen key USING T25 TORX Tighten disc brake rotor bolts with the T25 Torx bit. 4mm Allen Key USING 8MM ALLEN KEY HEXUS™ X USER'S GUIDE Tighten or remove two-piece Presta valve cores. Insert 5mm Allen key into 8mm tool bit. 8 mm T25 T15 2-year Warranty: All mechanical components against manufacturer defects only. Warranty Claim Requirements To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture. All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in any way not intended as described in this manual. * The specifications and design are subject to change without notice. Please contact your Topeak dealer with any questions. For USA customer service call: 1-800-250-3068 / www.topeak.com 1. Lubricate and maintain tool with Tefon® based lubricant when needed. 2. To prevent rusting, keep tool dry. MAINTENANCE * Campagnolo® is a registered trademark of Campagnolo S.r.I. * Tefon® is a registered trademark of DuPont.