RTI VTX-T Operation & User’s Manual

Preface Read this user manual carefully before using the product. Pictures shown in this manual is for reference only, different model and specifications are subject to real product. This manual is only for operation instruction only, not for any maintenance usage. The functions described in this version are updated till November 3, 2017. In the constant effort to improve our product, we reserve the right to make functions or parameters changes without notice or obligation. Please refer to the dealers for the latest details. Trademarks Product model and logo are trademarks. Any other trademarks mentioned in this manual are acknowledged as the properties of the trademark owner. No part of this publication may be copied or reproduced without the prior written consent. FCC Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. Operation of this equipment in a residential area is likely to cause interference, in which case the user at their own expense will be required to take whatever measures may be necessary to correct the interference Any changes or modifications not expressly approved by the manufacture would void the user’s authority to operate the equipment.

SAFETY PRECAUTIONS To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.  Unpack the equipment carefully and save the original box and packing material for possible future shipment  Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.  Do not dismantle the housing or modify the module. It may result in electrical shock or burn.  Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.  Refer all servicing to qualified service personnel.  To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.  Do not put any heavy items on the extension cable in case of extrusion.  Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.  Install the device in a place with fine ventilation to avoid damage caused by overheat.  Keep the module away from liquids.  Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.  Do not twist or pull by force ends of the optical cable. It can cause malfunction.  Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.  Unplug the power cord when left unused for a long period of time.  Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Table of Contents 1. Introduction ................................................................................................................. 1 1.1 Brief Introduction ............................................................................................... 1 1.2 Features ............................................................................................................ 1 1.3 Package Contents ............................................................................................. 1 2. Panel Description ........................................................................................................ 2 2.1 HDBaseT Transmitter ........................................................................................ 2 2.2 Twisted Pair Cable Description .......................................................................... 3 3. System Connection ..................................................................................................... 4 3.1 Usage Precautions ............................................................................................ 4 3.2 System Diagram ................................................................................................ 4 3.3 Connection Procedure ....................................................................................... 4 3.4 Application ......................................................................................................... 5 4. Specification ............................................................................................................... 6 5. Panel Drawing ............................................................................................................ 7 6. Troubleshooting & Maintenance ................................................................................. 8 7. Customer Service ....................................................................................................... 9

1 1. Introduction 1.1 Brief Introduction This product is an Ultra-thin HDBaseT Transmitter to extend HDMI signal to HDBaseT Receiver via CAT5e/CAT6a cable at 100m/PoH, and enables IR and RS232 pass-through to control remote displays. It also supports Ethernet interfaces for network. It also provides a perfect long range transmission solution. 1.2 Features  Ultra-thin design.  The highest resolution is 4Kx2k/60Hz.  HDCP2.2 compliant.  Maximum transmission distance is up to 70m for 4Kx2K.  Maximum transmission distance is up to 100m for 1080p.  Maximum extension distance is up to 100m for Ethernet.  Support bi-directional PoH.  High bandwidth：10.2Gbps.  Support IR/RS232 pass-through.  Use HDBaseT technology.  LED indicators show work status. Note: Please use a CAT5e cable with low impedance (Shielded twisted pair will be better and should be well grounded) for good transmission effect. 1.3 Package Contents  1 x VTX-T  2 x Mounting ears  4 x Black Plastic cushions  2 x Screws  1 x RS232 cables  1x Power adapter (DC 24V1.25A)  1 x User manual Note: If you find any defective or missing parts, please contact your local dealer.

2 2. Panel Description 2.1 HDBaseT Transmitter No. Name Description ① LINK HDBT Link status indicator:  OFF: No Link  GREEN:Link Successful  Blinking GREEN: Link abnormal ② HDCP HDCP compliant indicator  OFF: No HDMI traffic (no picture)  GREEN: Traffic with HDCP.  Blinking GREEN: Traffic without HDCP ③ Power OFF: No power; RED: DC power present. ④ RS232 RS232 connector. ⑤ IR IN Connect with 5V IR Receiver (with carrier) to collect infrared signal, work with far-end IR OUT port. ⑥ IR OUT Connect with 5V IR Emitter to send infrared signal, work with far-end IR IN port. ⑦ HDMI IN Connect with HDMI source. ⑧ HDBT OUT Connect to the HDBT IN socket on the Receiver via CAT5e/ CAT6a cable, support bi-directional PoH. ⑨ ETHERNET 100M Ethernet interfaces, when need to work in a LAN, one of these ports should be used for internet access, and the others can be connected with computers. If they are well connected, ⑩ ETHERNET LINK HDCP TX RX TX RS232 IR IN IR OUT HDMI IN HDBT OUT ETHERNET ETHERNET DC 24V 1 4 5 6 7 8 9 2 3

3 the yellow LED indicators on the corresponding ports will keep blink and the green ones will keep on when working. ⑪ DC 24V Connect with DC24V 1.25A power adaptor. (Not necessary if Receiver connects with power).  Pictures shown in this manual are only for reference. 2.2 Twisted Pair Cable Description The twisted pair used in this extender MUST be a straight-through cable. Notice: Cable connectors MUST be metal one, the shielded layer of cable MUST be connected to the connector’s metal shell, to make a better transmission. TIA/EIA T568A TIA/EIA T568B Pin Cable color Pin Cable color 1 green white 1 orange white 2 green 2 orange 3 orange white 3 green white 4 blue 4 blue 5 blue white 5 blue white 6 orange 6 green 7 brown white 7 brown white 8 brown 8 brown 1st Ground 4--5 1st Ground 4--5 2nd Ground 3--6 2nd Ground 1--2 3rd Group 1--2 3rd Group 3--6 4th Group 7--8 4th Group 7--8

4 3. System Connection 3.1 Usage Precautions  System should be installed in a clean environment and has a prop temperature and humidity.  All of the power switches, plugs, sockets and power cords should be insulated and safety.  All devices should be connected before power on.  Use shielded straight-thru CAT5e/CAT6a cable with TIA/EIA T568B terminations for good transmission effect. 3.2 System Diagram 3.3 Connection Procedure Step1. Connect HDMI source (such as DVD player) to HDMI IN port of the VTX-T with HDMI cable. Step2. Connect HDBT OUT port of VTX-T and HDBT IN port of Receiver with single CAT5e/CAT6a cable. Step3. Connect HDMI displayer (such as HDTV) to HDMI OUT port of Receiver with HDMI cable. Step4. Both VTX-T and Receiver have IR IN and OUT. When one model use for IR signal Receiver, the IR signal must be sent out by the other model. For example: When “IR IN” of Receiver connects with an IR Receiver, the IR 4K 70m 1080P 100m Laptop IR Receiver Projector Remote Projector IR Emitter VTX-1 Receiver Router Laptop HDMI: RS232: IR: HDBaseT: Internet:

5 Emitter must be connected to “IR OUT” of VTX-T. Step5. To set as a LAN, one of the four ETHERNET ports of VTX-T and Receiver should be used for Internet access, and the others can be connected with computers. Step6. Connect the RS232 port of the computer and the RS232 port of VTX-T or Receiver (any one is able to work as the RS232 signal can be transmitted bi-directionally) by using a RS232 cable. Step7. Connect with DC24V power adaptor(s) separately or only connect power adaptor to VTX-T or Receiver. 3.4 Application VTX-T has a good application in various occasions, such as computer realm, monitoring, big screen displaying, meeting room, education and bank & securities institution etc. .

6 4. Specification Input Input Signal (1) HDMI; (1) IR IN; (1) RS232 Input Connector (1) HDMI female; (1) 3.5mm mini jack; (1) 3P captive connector Video Signal HDMI1.4 Output Output (1) HDBaseT; (1) IR OUT (1) RS232 Output Connector (1) RJ-45; (1) 3.5mm mini jack; (1) 3P captive connector Ethernet Port Connector (2) Black RJ45, with a dual color indicator (Green & Yellow) Ethernet Transmission Speed Adaptive 10M/100M (max), full duplex or half duplex. General Resolution 800x600@60Hz、1024x768@Hz、1280x720@60Hz、 1280x1024@60Hz 、1366x768@60Hz、1600x1200@60Hz 1920x1080@60Hz、1920x1200@60Hz、3D、4K×2K Transmission Distance 1080P ≤ 100m; 4K×2K ≤ 70m Bandwidth 10.2Gbps HDMI Standard HDMI1.4 & HDCP2.2 Impedance 75Ω Temperature 0~ 50℃ Humidity 0% ~ 90% Power Consumption 10W Power Supply Input: 100VAC~240VAC, 50/60Hz; Output: 24VDC 1.25A Dimension (W*H*D) 152mmx16.2mmx104mm Net Weight 235g Note: All nominal levels are at ±10%.

7 5. Panel Drawing RS232 IR IN IR OUT HDMI IN HDBT OUT ETHERNET ETHERNET DC 24V LINK HDCP TX RX TX 152 mm 16.2 mm 104 mm

8 6. Troubleshooting & Maintenance Problems Potential Causes Solutions Output images in display show with ghost Incorrect setting on the display Check the display’s setting. A cable of bad quality Try another high quality connection cable. No output image when switching No signal at the input / output end Check with oscilloscope or multimeter if there is any signal at the input / output end. Fail or loose connection Make sure the connection is good. The extender is broken Send it to authorized dealer for repairing. Cannot control the device by control device (e.g. a PC) through RS232 port Wrong RS232 communication parameters Make sure the RS232 communication parameters are correct. The device has already been broken Send it to authorized dealer for repairing. Cannot recognize device connected to the ETHERNET port The connected device has the same IP address with the extender Change the IP address of the extender or the connected device. Static becomes stronger when connecting the video connectors Bad grounding Check the grounding and make sure it is connected well. Cannot control the device by RS232 / IR The device has already been broken Send it to authorized dealer for repairing. If your problem persists after following the above troubleshooting steps, seek further help from authorized dealer or our technical support.

9 7. Customer Service The return of a product to our Customer Service implies the full agreement of the terms and conditions hereinafter. There terms and conditions may be changed without prior notice. ① Warranty The limited warranty period of the product is fixed 3 (three) years. ② Scope These terms and conditions of Customer Service apply to the customer service provided for the products or any other items sold by authorized distributor only. ③ Warranty Exclusions:  Warranty expiration.  Factory applied serial number has been altered or removed from the product.  Damage, deterioration or malfunction caused by:  Normal wear and tear.  Use of supplies or parts not meeting our specifications.  No certificate or invoice as the proof of warranty.  The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.  Damage caused by force majeure.  Servicing not authorized by distributor.  Any other causes which does not relate to a product defect.  Shipping fees, installation or labor charges for installation or setup of the product. ④ Documentation: Customer Service will accept defective product(s) in the scope of warranty coverage at the sole condition that the defeat has been clearly defined, and upon reception of the documents or copy of invoice, indicating the date of purchase, the type of product, the serial number, and the name of distributor. Remarks: For further assistance or solutions, please contact your local distributor.

5775 12th Avenue East, Suite 180 Shakopee, MN 55379 Tel: 952-253-3100 Fax: 952-253-3131 www.rticorp.com