Regin ED9200 Manual 

• Can be used in combination with EXOflex, Corrigo E* or EXOcompact* • Background illuminated LCD-display, 4 rows with 20 characters a row • User-friendly keypad External display unit for controlling EXOflex, Corrigo E or EXOcompact. The display offers full external control when the controller is mounted in a panel or similar. ED9200 can also be used as a portable hand terminal. • Durable keypad, protection class IP41 When front mounted with sealant kit, IP65 • Built-in beeper (only with EXOflex) • The unit is compatible with EP9040 Description ED9200, external display, is an independent display & configuration unit which can be connected to either EXOflex, Corrigo E* or EXOcompact* via two different electrical interfaces. When it is connected to EXOflex, it is a free-standing PIFA which can be connected to a processor house via the EFX-channel. The display can be connected in two ways, either temporarily in the front panel of the Power PIFA via a quick cable connection, or permanently via screw connectors. ED9200 is delivered with a drill template for easy installation on a panel front or similar. Software requirements * EXOreal 2.8-1-26 or later for EXOflex * EXOreal 2.8-1-29 or later for EXOcompact and Corrigo E * EXOdesigner or EXOapt 2004 with software patches For full advantage of the four row display in older systems, a software patch for EXOapt 2004 is required or EXOdesigner must be used. Compatibility with EP9040 (LOT) ED9200 can be connected to an EXOflex configured for EP9040 (not meeting the software requirements above). The display will work but only the two upper text rows will be displayed. For correct function with EXOcompact and Corrigo E, the software requirements above must be fulfilled. Wiring There are a number of cables for fast connection, see overleaf. For connection to Corrigo E or EXOcompact, an EK12 or EK14 cable should be used. Indication lamps The indication lamps have the following functions: Symbol Function Colour % There is one or more unacknowledged alarm(s) Flashing red There is one or more remaining, acknowledged alarm(s) Fixed red ! You are in a dialog box where it is possible to switch to change mode Flashing yellow Change mode Fixed yellow P Power supply Green C Communication with process station Green * Only possible with Corrigo E and EXOcompact without display. revision 10 2010

Phone: +46 31 720 02 00 Web: www.regin.se Mail: [email protected] Sales Offices France: +33 1 41 71 00 34 Germany: +49 30 77 99 40 Spain: +34 91 473 27 65 Hong Kong: +852 24 07 02 81 Singapore: +65 67 47 82 33 ED9200 Models ED9200 Basic model ED9200IP65 Same as basic model but with higher protection class Connections Connection terminal ED9200 Terminal Connection to EXOflex 1 + 24 V 2 N (0 V) 3 A (EFX-channel) 4 B (EFX-channel) Terminal Connection to Corrigo E/EXOcompact 5 SDO - Yellow 6 SDI - Orange 7 SCL - Red 8 N (0 V) - Brown 9 + 5 V - Black Connection for permanent connection to EP1011 ED9200 Function Terminal EP1011 1 + 24 V 4 2 N (0 V) 3 3 A 2 4 B 1 Connection for fast connection to front of EP1011 ED9200 Function Cable colour USB EP1011 1 + 24 V Red 1 2 N (0 V) Black 4 3 A Green 3 4 B White 2 Dimensions & wiring Dimensions (w x h x d) 180 x 134 x 23 mm Wiring Wiring for connection to EXOflex EK10, Four-wire cable with connection to EXOflex Main Power PIFA for use via EFX-channel. (USB type A male connector and stripped free end). EK10 - Connecting cable, display unit ED9200, 1.5 m For other cable lengths, use type CAT-5. Wiring for connection to Corrigo E* or EXOcompact* EK12...14, Four-wire cable with connection to Corrigo E/ EXOcompact. EK12 - Connecting cable, display unit ED9200, 3 m EK14 - Connecting cable, display unit ED9200, 10 m At the bottom of Corrigo E/EXOcompact, there is an RJ12 modular jack for fast connection. * Only possible with EXOcompact without display. With Corrigo E or EXOcompact With EXOflex Power supply internal supply via communication cable 24 V DC, via the EFX-channel Tolerance - 18...30 V DC Power consumption - 50 mA Communication port serial, special The EFX-channel Max cable length 10 m 200 m Technical data 134 180 Protection class IP41(ED9200), IP65 (ED9200IP65) Character height display 4,75 mm This product conforms with the requirements of European EMC standards CENELEC EN61000-6-1 and EN61000-6-3 and carries the CE-mark.