MREL BlastCam 2G Color Quick Start Manual
Text of the manual
QUICK START GUIDE
1
2
3
A: EXTEND TRIPOD LEGS.
B: POSITION GRIP BALL HEAD.
REMOVE THE LENS COVERS FROM BOTH THE CAMERA AND THE
LENS THEN ATTACH THE CAMERA LENS TO THE CAMERA AND
TWIST INTO PLACE.
CONNECT THE BLASTCAM™ INPUT CABLE TO
THE BACK OF THE BLASTCAM™
ROTATE GRIP BALL HEAD
UNTIL SECURE ON TRIPOD.
SECURE THE MOUNTING ADAPTER ON TO THE BOTTOM OF
THE LENSE. ENSURE A TIGHT FIT.
USING THE
MOUNTING
ADAPTER SECURE
THE CAMERA
AND LENSE TO
THE TRIPOD.
A: MOUNT THE BLASTCAM™
CONTROLLER MOUNT TO THE TRIPOD.
B: POSITION ON THE MOUNT THE
BLASTCAM™ CONTROLLER.
4
5
6
7
CONNECT ONE END OF THE ETHERNET
COMMUNICATION CABLE TO THE BACK OF
THE BLASTCAM™
8
CONNECT THE OTHER END OF THE
ETHERNET COMMUNICATION CABLE
TO THE BLASTCAM™ CONTROLLER
9
A
B
A
B
CONNECT THE TRIGGER
CABLE TO THE INPUT
CABLE.
(IF YOU DO NOT INTEND
TO USE THE IMAGEBLITZ
MOTION TRIGGER).
AC POWER: CONNECT THE POWER
CABLE ADAPTOR TO THE INPUT CABLE.
DC POWER: CONNECT THE DC
POWER CABLE TO THE INPUT CABLE.
POWER ON THE
BLASTCAM™
CONTROLLER
DOUBLE CLICK
THIS ICON ON
THE DESKTOP
OF THE BLASTCAM™
CONTROLLER
12
13
SET THE APERTURE TO THE LOWEST
NUMBER AND THEN ADJUST THE ZOOM, APERTURE AND FOCUS
ON THE LENS TO OBTAIN THE PERFECT PICTURE
THE FOLLOWING SCREEN WILL LOAD ON THE BLASTCAM™
CONTROLLER. SETUP THE RECORDING SPEED, RESOLUTION, AND
TRIGGERING METHOD. CLICK THE LIVE BUTTON TO ENTER LIVE MODE.
14
15
PRESS THE TRIGGER BUTTON IF USING THE TRIGGER SWITCH OR
IN THE BLASTCAM™ CONTROLLER SOFTWARE, THE CLICK THE
RECORD BUTTON TO START RECORDING.
18
19
POWER ON THE BLASTCAM™ CONTROLLER IF IT IS IN SLEEP MODE,
PRESS RECONNECT BUTTON TO CONNECT IF NEEDED.
THE USER CAN NOW PLAYBACK THE VIDEO FOR REVIEW.
THE SUBJECT WILL BE VIDEO RECORDED.
THE USER CAN NOW PROCESS THE VIDEO AND/OR IMAGES AND
EXPORT THE VIDEO AND/OR IMAGES.
17
