Point Source Audio CM-i3 Owner's Manual

Owner’s Manual Product Warranty Point Source Audio (PSA) products purchased in the U.S.A. are warranted for one year from date of purchase to be free of defects in materials and workmanship. In event of such defect, product will be repaired without charge or replaced (at our option) with a new product of equal or superior value. This warranty excludes defects due to normal wear, abuse, shipping damage, or failure to use product in accordance with instructions. This warranty is void in the event of unauthorized repair or modification. Please register your product warranty and always KEEP YOUR RECEIPT. REGISTER YOUR WARRANTY Your prompt product registration establishes your right to the protection available under the terms and conditions of your Point Source Audio warranty. It also helps us contact you in the rare event that we discover an issue with your product. And, it helps us to bring you new products specifically designed to meet your needs. www.point-sourceaudio.com/warranty.html © 2017 Point Source Audio. All rights reserved. The Point Source Audio logo is a registered trademark of Point Source Audio. All other trademarks included herein are the property of their respective owners. Patent Number: 9,271,065 Specifications Microphone Specifications ELEMENT: Moving coil dynamic DIRECTIONAL CHARACTERISTICS: Noise Cancelling Cardioid SENSITIVITY: -60dBV/Pa FREQUENCY: 300Hz to 10kHz IMPEDANCE: 200Ω Earphone Specifications SPEAKER TYPE Single driver ported SENSITIVITY 120dB SPL@1VRMS (at 1 kHz) IMPEDANCE 32Ω COLOR Silver housing with gold band, black cable CABLE LENGTH (TOTAL) 1.2 Meters L/R CABLE 50 cm INPUT CONNECTOR 3.5 mm TRANSDUCER HOUSING Metal (Design and specifications are subject to change without notice). www.point-sourceaudio.com www.point-sourceaudio.com www.point-sourceaudio.com Read the enclosed instructions and cautions thoroughly before using this product. Failure to observe the proper use of this product could result in voiding your warranty.

Your headset can be conveniently adapted to work with different intercom systems or even your smart phone. See our adapter cables in the Parts List for cross compatibility options. Storing Your Headset Follow these instructions for proper storage: Parts List Included Accessories EM-3 EM-3 Earphones terminated with 3.5mm mini connector CM-CSE Premium headset storage case, orange CM-WSN Windscreen for CM-i3 with o-ring CM-BCP Belt clip accessory for XLR connector CM-HSi Headband sizer Optional Accessories ADP-4Mx5Mm Adapter cable: 4-pin male XLR to 5-pin male mono XLR ADP-5Fx4F Adapter cable: 5-pin female XLR to 4-pin female XLR ADP-4MxPH Adapter cable: 4-pin male XLR to male 3.5mm TRRS ADP-5FxPH Adapter cable: 5-pin female XLR to male 3.5mm TRRS ADP-PHx4F Adapter cable: female 3.5mm TRRS to 4-pin female XLR ADP-PHx5Mm Adapter cable: female 3.5mm TRRS to 5-pin male mono XLR ADP-PHx5Ms Adapter Cable: female 3.5mm TRRS to 5-Pin Male Stereo CM-PCH Intercom headset travel pouch, black CM-EXT-4/5 Expandable cable with 4 or 5-pin male and female XLR. 2 ft. retracted / 10 ft. extended CM-CAB-KIT Cable wrap with earphone installation tool 6-ETP-S 6-ETP-M 6-ETP-L 3 sets eartips for EM-3/5 earphones. Specify size: small, medium, or large Fitting Your Headset To size the headband for a tighter fit, attach the CM-HSi to the head frame on both sides. Securing Your Microphone When adjusting your boom microphone, always secure the mic to the headset by aligning the arrow with the circle to “lock” the mic into position. Do NOT force the boom past this point as it may cause damage to your microphone over time. STEP 1 STEP 2 Line up the symbols to lock the boom into place. Place headset and ensure microphone is safely tucked into the base. Next, gently coil the cable on top of the headset.