SMART kapp iQ Quick Reference Manual

This quick reference guide explains how to use your SMART Board® 6000 series interactive flat panel and SMART kapp iQ features. Turning the board on 1. Turn on the room computer. 2. Flick the power switch beside the AC power inlet to the ON (I) position. 3. Press the Standby button on the front control panel. Front control panel The front control panel contains the Standby, Input Select, Mute and volume control buttons. Basic gestures The SMART kapp iQ board supports a variety of gestures within apps, including panning, scaling, rotating and zooming in and out.

2 Zoom in Pan Erase (with hand) Zoom out Erase (with pen) Cleaning To clean the screen 1. Turn off any connected computers. 2. Press the Standby button on the front control panel twice. 3. Turn off the interactive flat panel by flicking the power switch beside the AC power inlet. 4. Wipe the screen with a lint-free, non-abrasive cloth. Cleaning tips l If dry-erase markers are used on the screen, remove the ink as soon as possible with a lint- free, non-abrasive cloth. l Do not use cleaning solution or glass cleaner on the interactive flat panel screen, because they can deteriorate or discolor the screen.

3 Using SMART Ink If the computer is connected to a SMART interactive product, SMART Ink starts automatically when you start your computer. Pick up a pen and the dynamic toolbar appears (minimized) on the display. If the dynamic toolbar doesn’t appear, start SMART Ink manually using one of the following processes: l Windows 7: Select Start > All Programs > SMART Technologies > SMART Ink l Windows 8: Go to the Apps screen and select SMART Technologies > SMART Ink l Windows 10: Select Start > All apps, and select SMART Technologies SMART Ink Using the dynamic toolbar in minimized mode Interaction Action Interaction Behavior Press to switch between minimized and full mode Pan Drag to edge of display to dock the dynamic toolbar Erase (with pen) If there are two users at the interactive flat panel, two dynamic toolbars appear and can be used independently.

4 Using the dynamic toolbar in full mode SMART Touch Inking Tool If the computer is connected to a SMART interactive product that supports touch recognition, you can use the SMART Touch Inking Tool to write or draw with your finger or an accessibility aid, such as a tennis ball. Follow these steps to switch from the dynamic toolbar to the SMART Touch Inking Tool: 1. Press the SMART Board icon in the notification area (Windows operating system). OR Press the Mac menu bar (Mac OS X operating system software). 2. Select Show SMART Touch Inking Tool. Switching modes To present information, you can use board in computer mode and pick up the pen and start writing without connecting your mobile device. If you want to save or share your notes, switch to SMART kapp iQ mode and connect your mobile device. You can switch between your the computer and SMART kapp iQ mode by pressing the Input Select button on the front control panel and selecting HDMI (computer) or OPS/HDMI2 (SMART kapp iQ). Using SMART kapp iQ SMART kapp iQ is a whiteboard and a suite of apps that runs from an embedded appliance. Designed specifically to complement individual, small group and whole-room collaboration, SMART kapp iQ fully integrates with mobile devices, including tablets, smartphones, laptops and Chromebooks.

5 Using the launcher The launcher contains all your apps and settings. To open the launcher Press the Home button on the screen. The launcher appears. To close the launcher Select an app, press the Home button or tap anywhere on the screen. The launcher closes. Using the Whiteboard You can draw on the Whiteboard with the pen and use basic gestures to manipulate content. SMART Ink is available only while using the Input app and when SMART Product Drivers is installed on the connected computer. To use the Whiteboard with your mobile device Task Solution Before you connect to a session Ensure you’ve downloaded the SMART kapp app from the App Store or Google Play™ Connect and start a session 1. Start the SMART kapp app on your mobile device. 2. Hold the mobile device’s rear facing camera to the board’s QR code until the QR code appears in the center of the app. TIPS o Connect your mobile device to the board as soon as you enter the classroom, as only one mobile device can be connected to the board at a time. o To disconnect a student’s device from the board, press Disconnect on the board. Save a snapshot of a session Connect to the board and press Capture on the board or in the SMART kapp app. View a snapshot To view a saved snapshot on your mobile device, tap Sessions and tap the thumbnail to view it.

6 Task Solution Sharing a snapshot 1. View a snapshot on your mobile device. iOS device: Tap Export and then select Save to Camera Roll or Share as PDF. Android device: Tap Menu and then select Share as Image or Share as PDF. Invite others to a session (up to 250 people) 1. Connect your mobile device to the board. 2. From the SMART kapp app, tap Invite and then select Send Link. 3. Select the app you want to use to send the invitation. When others connect, remote participants can use their own device or SMART kapp iQ board to add content to the session. To erase all notes on the Whiteboard 1. Press the Erase All icon. 2. Press Yes, Save it to save the Whiteboard session to the Library and erase the Whiteboard. OR Press No, discard it to erase the Whiteboard. The session isn’t saved to the Library. OR Press Cancel to return to the Whiteboard. Your notes are not erased. Using the Whiteboard Library The Whiteboard Library stores Whiteboard sessions on the AM30 appliance. You can open the Library and continue a saved session on the board. Using Workspaces Workspaces app allows you to access SMART amp collaborative learning software on your SMART kapp iQ board. SMART amp is an easy-to-use cloud-based app that enables teachers and students to collaborate in real time. SMART amp integrates with Google Drive and Google Apps for Education, which simplifies deployment and account management for your school. Using the Browser You can use a web browser on the SMART kapp iQ board.

7 Using Input You can display content from your computer on the board when you connect a computer to the AM30 appliance. To take full advantage of the board’s touch and ink features, download and install SMART software: smarttech.com/en/Home+Page/Support/Browse+Support/Download+Software. To display content on the board NOTE Make sure the OPS/HDMI input source is selected. 1. Connect a computer to the AM30 appliance’s HDMI in and USB receptacles. 2. Open the launcher. The launcher appears. 3. Press Input . The board detects the connection. 4. The computer’s desktop appears on the screen. Using Screen Share You can share content wirelessly on the SMART kapp iQ board from your computer or mobile device. Make sure the board and your mobile device or computer are on the same network. IMPORTANT For more information about screen sharing, see the SMART kapp iQ user’s guide (smarttech.com/en/kb/170812) or visit the support page support.smarttech.com/en/hardware/kapp. To share content using the Chrome browser 1. On the board, open the launcher. The launcher appears. 2. Press Screen Share . 3. On your computer, open the Chrome browser. 4. Open the tab you want to share on the board.

8 5. In the top right corner of your browser, click the Cast icon . 6. Select the board’s name. When you’re sharing content, the Cast icon turns blue. NOTE For troubleshooting tips for the Chrome browser, see support.smarttech.com/docs/hardware/kapp/kapp-iq/en/troubleshooting/screenshare- troubleshooting/more-screensharing-troubleshooting_Chrome.cshtml. To share content from a Windows computer You can use the Chrome browser to share content from your Windows computer. See To share content using the Chrome browser on the previous page. You can purchase AirParrot, an application that allows you to share your display, a single application or a media file. See airsquirrels.com/airparrot/features/win. NOTE For troubleshooting tips for Screen Share on a Windows computer, see support.smarttech.com/docs/hardware/kapp/kapp-iq/en/troubleshooting/screenshare- troubleshooting/more-screensharing-troubleshooting_Windows.cshtml. To share content from an Apple device NOTE For troubleshooting tips for an Apple product, see support.smarttech.com/docs/hardware/kapp/kapp-iq/en/troubleshooting/screenshare- troubleshooting/more-screensharing-troubleshooting_Apple.cshtml. 1. On the SMART kapp iQ board, open the launcher. The launcher appears. 2. Press Screen Share . 3. On your Mac computer, click the Airplay icon in the menu bar. 4. Select the board’s name. The Airplay icon turns blue when your Mac computer is sharing content with AirPlay.

9 To share content from an Android mobile device 1. Download the Google Cast app from Google Play. 2. On the board, open the launcher. The launcher appears. 3. Press Screen Share . 4. On your Android mobile device, open the Google Cast app. 5. In the top left corner, press the navigation drawer . 6. Press Cast Screen. 7. Select the board’s name. If you don’t see the board you want, press MORE SETTINGS to show more boards. NOTE For troubleshooting tips for an Android mobile device, see support.smarttech.com/docs/hardware/kapp/kapp-iq/en/troubleshooting/screenshare- troubleshooting/more-screensharing-troubleshooting_Android.cshtml. To stop sharing content to the board TIP You can disconnect your mobile device or computer to stop sharing content to the board. 1. Tap the board. The overlay appears. 2. In the top right corner of the screen, press . 3. The message “Want to disconnect?” appears. Press Yes.

10 Connecting computers to the SMART kapp iQ Some models of the AM30 appliance include computer connectors. To the board’s touch features and use a pen to draw and write, follow these steps: By connecting a computer to the AM30 appliance instead of the board, you can quickly switch between the computer and other SMART kapp iQ features. NOTE If the computer you’re connecting has SMART Ink and SMART Product Drivers installed, you can write and draw on the board. 1. Connect a computer to the AM30 appliance using USB and HDMI cables. 2. Download and install SMART Product Drivers and SMART Ink on your computer. See smarttech.com/us/Support/Browse+Support/Download+Software. 3. Use the Input app. NOTE When you connect a computer to the AM30 appliance, make sure the input source is OPS/HDMI. Resolving touch and video issues If you’re having touch or video issues, ensure the USB and HDMI cables connecting the room computer to the interactive flat panel are secure. The USB cable controls touch, and the HDMI cable controls the video. Resources Resource URL Support page support.smarttech.com/en/hardware/kapp User’s guides and online help l SMART kapp iQ user’s guide (smarttech.com/en/kb/170812) l SMART Ink 4 (smarttech.com/en/kb/171027)

11 Resource URL FAQs and quick reference guides l SMART kapp iQ FAQ (smarttech.com/kb/170954) l SMART Ink 4 quick reference guide (smarttech.com/en/kb/171026) Installation and administrator guides l SMART kapp iQ 55 and 65 installation instructions (smarttech.com/kb/170810) l SMART kapp iQ 65-V2 installation instructions (smarttech.com/kb/171107) l SMART kapp iQ 75 installation instructions (smarttech.com/kb/170996) l SMART kapp iQ administrator’s guide (smarttech.com/kb/171038) Troubleshooting l Knowledge base and communities (community.smarttech.com) l SSMART kapp iQ troubleshooting guide (bit.ly/kappiQtrouble) Specifications l SMART kapp iQ 55 specifications (smarttech.com/kb/170840) l SMART kapp iQ 65 specifications (smarttech.com/kb/170816) l SMART kapp iQ 65-V2 specifications (smarttech.com/kb/171094) l SMART kapp iQ 75 specifications (smarttech.com/kb/171001) smarttech.com/support smarttech.com/contactsupport © 2016 SMART Technologies ULC. All rights reserved. SMART Board, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners. Contents are subject to change without notice. 10-2016.