VM Audio VMCS21 Quick Installation Manual

smartphones, notebooks and tablets. (refer to the Setup section) Use Stereo RCA Cables (not included) to connect to TV or game console sets. (refer to the Setup section) •� Turn on the speaker system. •� Set the Main volume to the nine o’clock position to start. •� Set the Bass volume to the nine o’clock position to start. •� Turn on audio source and launch media. •� Adjust volume settings as needed. 2.1 Speaker System Quick Installation Guide VMCS21 VM Audio Tech Support US / Canada phone: (855) audio-99 / (855) 283-4699 email: [email protected] © VM Audio All rights reserved. All trade names are registered trademarks of respective manufacturers listed. System is not powering on? •� Switch power button on and verify if the LED indicator is illuminated. •� Confirm that the AC plug is plugged in and that there is power to that outlet. Speaker(s) does not produce sound? •� Verify the system is getting power and check above steps. •� Make sure the volume is turned up to an audible listening level and/or your PC is not in a mute status. •� Verify that all cables are plugged into the correct jacks. •� Try connecting your system to another audio source or device. If the system works correctly with the other device, then your first device is most likely the cause of the problem. Sound is distorted or is not clear? •� Low quality compressed music files will increase the distortion and noise that are easily noticed with amplified speakers. Recheck sound quality with a non-compressed music file. •� Check the audio source level and decrease if necessary. You should never have your source volume above 90% volume level to minimize distortion. | 7 | 8 | 9 | 10 Rev. 1 2.1 Speaker System VMCS21 L L R R AUDIO OUTPUT AUDIO INPUT ON OFF AC IN ˜ POWER SWITCH 1. Use a Stereo RCA Cable (not included) to plug into the audio output of a TV or game console. 2. Plug the other end of the cable into the Input Section of the Subwoofer. Setup (option 3) 5. Operation 6. Troubleshooting Caution & Warning CAUTION RISK OF ELECTIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. •� Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. •� Keep the bass module free from moisture, water, and dust. •� Do not let foreign objects into the port opening of the subwoofer. •� Handle the power cord carefully. Hold the plug when unplugging the cord. •� Unplug the power cord when not using the unit for long period of time. •� Do not let flammable sprays come in contact with the unit. •� Never disassemble or modify the unit in any way. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE

2.1 Speaker System Quick Installation Guide VMCS21 Rev. 1 2. Connections/Controls Connections 3. Power Switch 4. AC Power Cord 5. Audio Input 6. Speaker Output Controls 1. Main Volume 2. Bass Volume 3 5 6 4 2 1 1. Plug the speaker wires into the Output RCA jacks on the Subwoofer. 2. Plug the Subwoofer Power Cord into an electrical outlet. | 1 | 2 | 3 | 4 | 5 | 6 L L R R AUDIO OUTPUT AUDIO INPUT ON OFF AC IN ˜ POWER SWITCH Two Satellite Speakers and One Subwoofer Quick Guide Connections/Controls 3. Connect 4. Setup (option 1) Setup (option 2) L L R R AUDIO OUTPUT AUDIO INPUT ON OFF AC IN ˜ POWER SWITCH 1. Use the Stereo 3.5mm side of the Audio Cable (included) to plug to the headphone or audio output of a tablet or notebook. 2. Plug the other end of the Audio Cable into the Input Section of the Subwoofer. L L R R AUDIO OUTPUT AUDIO INPUT ON OFF AC IN ˜ POWER SWITCH 1. Use the Stereo 3.5mm side of the Audio Cable (included) to plug to the headphone output of a smartphone or mp3 player. 2. Plug the other end of the Audio Cable into the Input Section of the Subwoofer. 1. Inside The Box