WABCO SMARTBOARD Driver Manual

haulage company operations and reducing the costs of the vehicle fleet. The SmartBoard provides a wide range of functions that can be accessed via symbols from the main menu. The chapters below describe the various functions. The following rules apply: • If a system is not available and no information can be retrieved from it, the corresponding menu symbol is not displayed. • When the vehicle is at a standstill, the values that were last saved are displayed. • These may deviate from the actual values (e.g. the tire pressure if a leak is present) SMARTBOAD DRIVER MANUAL OPERATING INSTRUCTION Button - Function Selection of next menu item or next option Confirmation and / or execution of the currently selected function Back one menu level / or save settings Messages Signal lamp flashing: Check current message Driver Manual Icon Function Display Description Options Similar to Smart- Board icons Name and / or description of the function Description of the information or function you see on left display The displayed buttons / functions are available for the left display

Function Short Description Page Air Suspension Operating status of the Air Suspension e.g. lifting and lowering of vehicle body and lift axle 4 Load Monitoring Display of current axle loads 7 Mileage Counter Display of mileage and trip data 8 Messages Display of diagnostic and system messages. Check this menu when the signal lamp flashes 8 Steering Axle Lock Lock / Unlock steering axle 8 Lining Wear Status display for the brake linings 9 SafeStart Enable / Disable automatic brake in the case of unsafe driving conditions 9 Bounce Control Smooth release of brake to avoid bouncing caused by bogie tension 9 Brake Release Release service brake while the vehicle is at a standstill 10 GIO Function 1 & 2 Freely configurable user functions 10 Tire Monitoring Display of tire information such as current tire pressure and nominal pressure 10 Finisher Brake Set target braking pressure for road finishers 10 Vehicle Inclination Display of inclination angle of the trailer 11 Electronic Park Brake Enable / Disable Electronic Park Brake 11 Immobilizer Lock / Unlock trailer brakes with a PIN 12 (Immobilizer) Emergency Release Emergency release for trailers locked by Immobilizer 12 Actual Trailer Length Display of actual trailer length 12 Language Change language 13 Extras System information and settings 13 Codes Of Messages Short Description Page Component: TEBS D System messages of TEBS D 16 Component: TEBS E (TEBS D/E) System messages of TEBS E 16 Component IVTM System messages of IVTM / OptiTireTM 18 Type of fault 18 TABLE OF CONTENT

Air Suspension Menu Function Display Description Options Operating status of Air Suspension Menu Air suspension menu: the selected function is highlighted with a black box and the name is displayed in the middle of the menu Select next function Select function / activate function Select previous function Dashed box: Activated function Flashing: Deactivated function Select next function Select function / deactivate function Select previous function Go back to main menu: Select the arrow Go back to main menu Air Suspension Functions Function Display Description Options Up & Down Lifting and lowering of entire vehicle body Lift vehicle Lower vehicle Stop* Front Up & Down Lifting and lowering of 2-point drawbar trailer Lift front axle Lower front axle Stop* Rear Up & Down Lifting and lowering of 2-point drawbar trailer Lift rear axle Lower rear axle Stop* Left Up & Down Lifting and lowering of 2-point semi-trailer Lift left side Lower left side Stop* * Only if dead-man’s function is deactivated in parameterization

Function Display Description Options Right Up & Down Lifting and lowering of 2-point semi-trailer Lift right side Lower right side Stop* Request Driving Level Lifting / Lowering to (pre-) selected driving level Start lifting / lowering Vehicle is lifting / lowering Stop lifting/ lowering Change Driving Level Select available Driving Level. Menu will be displayed only if more than one Driving Level is parameterized Select next level Apply level Unloading Level See in menu if function is active (dashed box) or not Disable unloading switch (function will not be started if switch is active) Lift Axle Up & Down The axle is lowered Lift axle (lift axle one will always be lifted before lift axle two) The axle is lifted Lower axle (lift axle two will always be lowered before lift axle one) Lift Axle OFF Lift axle one and two are enabled Select lift axle Disable lift axle (lift axle stays permanently lowered) Lift axle one is disabled Select lift axle one Enable lift axle (lift axle can be lifted by lift axle functions) * Only if dead-man’s function is deactivated in parameterization

Function Display Description Options Traction Help Traction Help automatic mode is activated Disable Traction Help automatic mode Traction Help is deactivated Start Traction Help Traction Help automatic mode is deactivated Enable Traction Help automatic mode Traction Help is activated Stop Traction Help OptiTurn™ OptiTurn™ automatic mode is enabled Disable OptiTurn™ automatic mode OptiTurn™ is off Start OptiTurn™ OptiTurn™ automatic mode is disabled Enable OptiTurn™ automatic mode OptiTurn™ is on Stop OptiTurn™ OptiLoad™ OptiLoad™ automatic mode is enabled Disable OptiLoad™ automatic mode OptiLoad™ function is off Start OptiLoad™ OptiLoad™ automatic mode is disabled Enable OptiLoad™ automatic mode OptiLoad™ function is on Stop OptiLoad™ Memory Level 1 Set and save Memory Level 1 Request Memory Level 1 Press > 5s to store current level as Memory Level 1 Vehicle is lifting / lowering Stop

Function Display Description Options Memory Level 2 Set and save Memory Level 2 Request Memory Level 2 Press > 5s to store current level as Memory Level 2 Vehicle is lifting / lowering Stop Automatic Level Control Disable level control when at a standstill Disable temporary Press > 5s to disable permanently Forklift Control Forklift Control is disabled Enable 2nd lift axle characteristic (due to attached forklifter) Forklift Control is enabled Disable 2nd lift axle characteristic (due to attached forklifter) Season Traction Help Season mode is off Enable Season Traction Help function Date displays range of the "season" (DD.MM to DD.MM)* Season mode is on Disable Season Traction Help function Date displays range of the "season" (DD.MM to DD.MM)* * Date is only available when the SmartBoard has an internal battery and it is parameterized in modulator. Load Monitoring Function Display Description Options Display of current axle loads Display of current axle loads Go to next axle

and trip data Odometer Displays mileage recorded by SmartBoard Go to next item Mileage Displays mileage recorded by EBS Go to next item Trip EBS Displays trip mileage counter EBS Go to next item Trip Displays trip mileage counter SmartBoard Go to next item Messages Function Display Description Options Display of diagnostic and system messages Displays current active system messages and components. Displays the status of the warning lamp Go to next message System messages See: Codes of Messages page 16 and following Steering Axle Lock Function Display Description Options Lock / Unlock steering axle Steering Axle Lock is deactivated, axle is released Enable steering axle lock Steering Axle Lock is activated, axle is locked Disable automatic function for steering axle

brake linings All brake linings have a sufficient thickness and are OK At least one brake lining has reached a wear limit. Please contact a workshop SafeStart Function Display Description Options Enable / Disable automatic brake in case of unsafe driving condition (overruling the functional switch) The brake is applied (function was activated by switch) Release SafeStart brake (parking brake has to be applied before) The brake is released Apply SafeStart brake (parking brake has to be applied before) Bounce Control Function Display Description Options Smooth release of brake to avoid bouncing caused by bogie tension Bounce Control function is deactivated Activate Bounce Control - only possible if park brake is engaged Bounce Control function is active Deactivate Bounce Control

of brake Mind all safety precautions! Safety function. User has to mind all safety precautions Release brake GIO Function 1 & 2 Function Display* Description Options Enable / Disable customer function 1 (/ 2) Display and control options depend on customized function. For information about GIO functions, please contact your WABCO service partner. Tire Monitoring Function Display Description Options Display of tire pressure information Displays the current and nominal tire pressure from IVTM / OptiTireTM system Go to next tire pressure Finisher Brake Function Display Description Options Finisher Brake Finisher Brake is deactivated Enable Finisher Brake Switch to brake pressure mode Finisher Brake is activated Disable Finisher Brake Switch to brake pressure mode Finisher Brake Setting brake pressure in steps of 0.1 bar Increase brake pressure Decrease brake pressure

of the trailer Displays current Vehicle Inclination and max. allowed Vehicle Inclination A flashing attention symbol warns if the current is above max value Electronic Park Brake Function Display Description Options Activate and deactivate Electronic Park Brake Park brake is deactivated either temporary or permanently Activate park brake Park brake is activated (display during sleep mode) - Brake has to be applied to prevent rolling away - Park brake is activated Deactivate park brake permanently Deactivate park brake temporarily

brakes with a PIN The trailer wheels are unlocked. Lock trailer by entering PIN Select numbers 0 ... 9 Go to next digit position Confirmation of input Optional: engage parking brake before release - The trailer wheels are locked. Unlock trailer by entering PIN Select numbers 0 ... 9 Go to next digit position Confirmation of input Set new PIN See Settings: Set new PIN page 15 (Immobilizer) Emergency Release Function Display Description Options Emergency function for Immobilizer Allows up to 3 times to temporary release the brake even when Immobilizer is activated. As soon as vehicle stops, Immobilizer will be activated again. Remaining releases are displayed. Function is active while Immobilizer is locked Confirm emergency release Actual Trailer Length Function Display Description Display of Actual Trailer Length Displays the Actual Trailer Length (e.g. from extendable wood trailers)

languages* The current language is English Go to next language Select language *Available languages depend on language package. Extras Menu Function Display Description Options Operating status of Extras Menu System information and settings can be displayed and/or changed Select function Extras Functions Function Display Description Options TEBS Data Trailer Info Display Displays sensor data of trailer, e.g. voltages, supply pressure, braking pressure and bellow pressure - ODR Data Displays the recorded board data Go to next item Parameter Memory Read parameters from modulator Select item Go to next item Select System Info System Displays the system information of modulator and IVTM, such as part number, software version, serial number, production date and Vehicle Identification Number (VIN) Go to next item IVTM Displays the ID of an IVTM sensor wheel module Go to next wheel module

information from SmartBoard, such as battery status, part number and software version - Settings Units Toggle between metric / imperial System Go to next item Select system Splash Image Change display duration (time of the start screen displays after turning on) Go to next item Change time in seconds Toggle screen saver On / Off Go to next item Select On or Off Set time without activity Go to next item Change time in seconds Load Set warning level for load and set overload level Jump to next digit position Select numbers 0 ... 9 Confirmation of input Main Menu Order Change the main menu order Go to next item Select menu item to be moved Move item Confirm new item order Save new order

New PIN setting by using old PIN for Immobilizer (see Immobilizer page 12 ) Go to next digit position Select numbers 0 ... 9 Confirmation of input when all digits are filled in > Set PIN by PUK. New PIN setting by using PUK for Immobilizer (see Immobilizer page 12) Go to next digit position Select numbers 0 ... 9 Confirmation of input when all digits are filled in Notes

007 Trailer modulator 010 EBS (ABS) relay valve 058 Trailer modulator 059 Trailer modulator 061 EBS relay valve 062 EBS relay valve / Pressure sensor 081 Pneumatic control line 083 Supply pressure sensor 084… 086 Electrical switching output 221 Trailer modulator / Sensor power supply 24 V 232 Trailer modulator / Sensor power supply 5 V 246 EBS-Trailer brake valve / Switch Component: TEBS E (TEBS D/E) 001 Wheel sensor a (TEBS D/E) 002 Wheel sensor b (TEBS D/E) 003 Wheel sensor c (TEBS D/E) 004 Wheel sensor d (TEBS D/E) 005 Wheel sensor e (TEBS D/E) 006 Wheel sensor f (TEBS D/E) 007 EBS (ABS) relay valve / Solenoid valve control (TEBS E) 009 Trailer modulator / Solenoid valve control (TEBS D/E) 010 Trailer modulator / Solenoid control 058 EBS relay valve / Redundancy 059 EBS relay valve / Pressure sensor 061 Trailer modulator / Redundancy 062 Trailer modulator / Pressure sensors 069 Axle load sensor internal (TEBS D/E) 075 Wear sensor (TEBS D/E) 076 Failure of target value selection / redundant braking (TEBS D/E) Code Message 077 Desired pressure sensor internal (TEBS D/E) 078 Desired pressure sensor external (TEBS D/E) 080 Demand pressure sensor internal 081 Brake pressure sensor (axle c-d) 082 Switch 1 for Trailer Length 083 Switch 2 for Trailer Length 084 Switch 3 for Trailer Length 085 Switch 4 for Trailer Length 086 Switch for overload indication 088 Lateral acceleration sensor (TEBS D/E) 089 Proximity switch 090 Freely configurable function 8 091 Freely configurable function 7 092 Freely configurable function 6 093 Freely configurable function 5 094 Freely configurable function 4 095 Freely configurable function 3 096 Freely configurable function 2 097 Freely configurable function 1 099 IN/OUT port 100 GIO-Freely configurable analogue function 101 GIO-Freely configurable digital function 102 Slot GIO 5 103 Slot GIO 4 104 Slot GIO 3 105 Slot GIO 2 106 Slot GIO 1 107 Slot GIO 6 108 Slot GIO 7 109 ABS sensor / Memory bit 110 Slot Subsystems 111 Button Bounce Control CODES OF MESSAGES CODES OF MESSAGES See also: Hints page 19 Example: Display in 1. Numeric block: 2. Numeric block: SmartBoard Component Type of fault Code 001 07 001 – Wheel sensor a 07 – Distance too big

lifting axle” 113 SmartBoard 114 Diagnostics power supply 115 Telematics 116 IVTM 117 ECAS Remote-Control Unit / Box 118 Axle load sensor external (axle c-d) 119 Axle load sensor external (axle e-f) 120 Distance sensor axle load (axle c-d) 121 Distance sensor axle load (axle e-f) 122 Freely programmable Function 3 123 Freely programmable Function 2 124 Freely programmable Function 1 125 Switch unloading level 126 Output speed signal 127 Distance sensor 2 (axle e-f) 128 Distance sensor 1 (axle c-d) 129 ECAS valve block 130 Output continuous positive voltage 2 131 Output continuous positive voltage 1 132 Output RSS active signal 133 Output ABS active signal 134 Finisher Brake 135 Not used 136 LIN Bus 137 Speed switch 2 (ISS 2) 138 Speed switch 1 (ISS 1) for manoeuvring aid 139 Valve residual pressure maintenance 140 Valve residual pressure maintenance for Traction Help 141 Lifting axle valve 2 142 Lifting axle valve 1 143 Pneumatic control line 144 Supply pressure sensor 145 External ELM 146 External ECAS 148 Internal ECAS / Calibration 156 Not used 157 Switch normal level 2 158 Switch Up 159 Switch Down 160 Brake release function 163 Axle load calibration 164 Not used 165 Trailer Length Proximity switch 1 167 Output Steering Axle Lock Code Message 168 Switch Output Steering Axle Lock 169 Immobilizer PIN invalid 170 Output tilt warning 178 Valve Immobilizer 179 Buzzer Immobilizer 180 Demand pressure at Router/Repeater 181 Router / Repeater power supply to local system 182 Router / Repeater power supply to following system 183 Router / Repeater CAN to local system 184 Router / Repeater CAN to following system 185 ECAS deactivation switch 186 Normal level 4 switch 187 Forklift control switch 188 Second axle load sensor external (axle c-d) 189 SafeStart 190 SafeStart pressure sensor 191 SafeStart warning lamp 192 Emergency Brake Alert 193 Green warning lamp 194 Brake temperature 195 eTASC rear axle 196 eTASC front axle 197 ECAS single block 2 198 ECAS front axle valve 199 Constrained normal level switch 200 GIO Service indication 201 Shared buzzer 202 Shared warning lamp 203 Service mode 204 GIO operating hours counter (ServiceMind) warning lamp 205 Output overload indication 206 Output overload indication 3rd modulator 207 Electronic Park Brake switch 208 Valve spring brake 209 2nd switch 210 Electronic Park Brake valve 211 Door locking system 212 Lift Axle Off Switch 213 Rear monitoring system switch 214 Trailer Length proximity switch 2 215 Trailer Length proximity switch 3 CODES OF MESSAGES

217 ECAS ramp level control input switch 220 Data link towing vehicle / trailer (TEBS D/E) 250 Not used 251 Power supply (TEBS D/E) 253 Parameter settings (TEBS D/E) 254 Trailer modulator (TEBS D/E) Component IVTM 639 CAN (short circuit / bus off) 927 Warning lamp 2 (optional / pin 4) 928 Warning lamp 1 (standard / pin 2) 929 Tire data cannot be analyzed 1121 Data on the CAN data bus 3011… 3054 Pressure in tire 3111… 3154 Leakage in tires and valves Code Message 3410… 3500 Tire pressure deviation Type of fault 00 Value too high 01 Value too low 02 Data is irregular or incorrect 03 Overvoltage / Short circuit to 24 V 04 Undervoltage / Short circuit to ground 05 Supply cable interruption 06 Current too high or circuit grounded 07 Distance too big 08 Slip 09 Signal failure 10 Jump up / Jump down 11 / 12 See failure note 13 Characteristics error 14 Special faults / See fault info 15 See failure note Notes CODES OF MESSAGES

• All data is for information only. • The display information or messages correspond to the situation of the last or current driving operation. • You can find a detailed explanation of message codes in the system description of SmartBoard in the product database INFORM under www.wabco-auto.com. • Only an authorized workshop is allowed to change SmartBoard batteries (concerns not ADR version 446 192 111 0) Switch-on / Switch-off Power supply Event Consequence Trailer vehicle coupled: ISO 7638 Ignition ON Display on Ignition OFF Display off (with IVTM after max. 20 min.) Trailer vehicle uncoupled: Internal battery of SmartBoard (not in ADR version 446 192 111 0) Pressing of a button (> 2 s) Display on Pressing of a button Display updated Notes HINTS

and global supplier of technologies that improve the safety and efficiency of commercial vehicles. Founded nearly 150 years ago, WABCO continues to pioneer breakthrough products and systems for braking, stability, suspension, transmission automation, and aerodynamics. Today, all of the world’s leading truck, bus and trailer manufacturers have WABCO technologies onboard. In addition, WABCO provides the industry with advanced fleet management solutions and aftermarket services. WABCO reported sales of $2.9 billion in 2014. The company is headquartered in Brussels, Belgium, and has 11,000 employees worldwide. For more information, visit www.wabco-auto.com WABCO © 2015 WABCO All rights reserved 815 010 138 3 / 12.2015 When purchasing a WABCO product, please make sure it has the typical WABCO product marks (particularly on packaging, lables and identification plate) as evidence that it is an original WABCO part. In case you have any doubts, please contact your WABCO sales partner. QUALITY ASSURED This publication is not subject to any update service. You will find the current version on the internet at http://www.wabco.info/8150101383