Versitron SG09108 Operation & User’s Manual

with (8) 1000Base SFP Slots U Usseerr’’ss M Maannuuaall vv22..00 © October 2016 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702 www.versitron.com

used or duplicated, for procurement or manufacturing purposes, without prior written permission by VERSITRON. VERSITRON LIFETIME WARRANTY All VERSITRON products are covered by a Lifetime Warranty against defects in materials and workmanship. This coverage is applicable to the original purchaser and is not transferable. We repair, or at our option, replace parts/products that, during normal usage and operation, are proven to be defective during the time you own the products, provided that said products and parts are still manufactured and/or available. Such repair/replacement is subsequent to receipt of your product at our facility and our diagnostic evaluation and review of the unit. Advance replacements are not provided as part of the warranty coverage. This warranty does not cover damage to products caused by misuse, mishandling, power surges, accident, improper installation, neglect, alteration, improper maintenance, or other causes which are not normal and customary applications of the products and for which they were not intended. No other warranty is expressed or implied, and VERSITRON is not liable for direct, indirect, incidental or consequential damages or losses. In the unlikely event a warranty issue should arise, simply contact us at 302-894-0699 or 1- 800-537-2296 or via email at [email protected] to obtain a Return Material Authorization (RMA) number, along with instructions for returning your product.

and eight 1000Base fiber optic SFP slots. The switch is designed with a switch controller and buffer memory that allows the two media types to operate smoothly. The RJ-45 copper port supports 10/100/1000Mbps and Half-Duplex or Full-Duplex modes, while the eight fiber optic SFP slots support 1000Mbps and Full-Duplex only. With an external power unit, the SG09108 provides excellent stability and reliability. 2. Checklist Before installing the SG09108, verify that the package contains the following: 1. (1) SG09108 9-Port Switch. 2. (1) AC-DC Power Adapter. 3. This User’s Manual. Please notify VERSITRON immediately if any of the aforementioned items are missing or damaged. 3. LED Descriptions LED Description SPD Lit when TP speed is 1000Mbps ACT Lit when TP connection is good Blinks when TP data is transmitting P1-8 Lit when SFP1-8 connection is good OR when SFP1-8 data is transmitting PWR Lit when +5V power is applied

1. Install a fiber optic SFP module into one of the SFP Slots. 2. Connect the fiber optic cable from the SFP module on the SG09108 to the fiber network. NOTE: Confirm that the fibers are connected Transmitter to Receiver. 3. Connect a UTP cable from the TP network device to the RJ-45 port on the SG09108. 4. Connect the power adapter to the SG09108 and check that the Power LED lights up. The TP Act and SFP LEDs will light when all cable connections are correct. 5. Technical Specifications  Standards: IEEE 802.3z/AB 10/1001000Base-T 1000Base-SX/LX/ZX  UTP Cable: Cat.5e or Cat.6 cable up to 100m  Fiber Cable: 1000SX: 50/125, 62.5/125µm multi-mode 1000LX/ZX: 8/125, 9/125µm single-mode  Data Transfer Rate: RJ-45 port: 10M, 100M, 1000Mbps SFP: 1000Mbps  LED Indicators: P1, P2, P3, P4, P5, P6, P7, P8, SPD, ACT, PWR  Duplex Modes: RJ-45 port: Half/Full-Duplex auto-negotiation SFP: Full-Duplex mode  Power Requirements: Input: 100 ~ 240VAC, 50/60Hz, Output: 5VDC, 2A  Ambient Temperature: 0 ~ 50℃  Humidity: 5% ~ 90%  Dimensions: 1.18 x 6.77 x 4.33 inches （H×W×D）

Model Speed (Mbps) Wavelength Media Distance Connector TX Power RX Sens Temp GBMM 1000 850nm MMF 62.5µ: 220m 50µ: 550m LC -9.5 ~ -4 < -18 0 to 70° C GB2MM 1000 1310nm MMF 2km LC -9 ~ -1 < -19 0 to 70° C GB10SM 1000 1310nm MMF / SMF MM 62.5µ: 220m MM 50µ: 550m SM 9µ: 10km LC -9.5 ~ -3 < -20 0 to 70° C GB20SM 1000 1310nm SMF 20km LC -4 ~ +1 < -24 0 to 70° C GB40SM 1000 1550nm SMF 40km LC -4 ~ +1 < -24 0 to 70° C GB70SM 1000 1550nm SMF 70km LC 0 ~ +5 < -24 0 to 70° C GB100SM 1000 1550nm SMF 100km LC 0 ~ +5 < -30 0 to 70° C GB10SFA 1000 Tx: 1310nm Rx: 1550nm SMF 10km LC -3 ~ -9 < -21 0 to 70° C GB10SFB 1000 Tx: 1550nm Rx: 1310nm SMF 10km LC -3 ~ -9 < -21 0 to 70° C GB20SFA 1000 Tx: 1310nm Rx: 1550nm SMF 20km LC -3 ~ -8 < -23 0 to 70° C GB20SFB 1000 Tx: 1550nm Rx: 1310nm SMF 20km LC -3 ~ -8 < -23 0 to 70° C GB40SFA 1000 Tx: 1310nm Rx: 1550nm SMF 40km LC -3 ~ +2 < -23 0 to 70° C GB40SFB 1000 Tx: 1550nm Rx: 1310nm SMF 40km LC -3 ~ +2 < -23 0 to 70° C GB60SFA 1000 Tx: 1310nm Rx: 1550nm SMF 60km LC 0 ~ +5 < -24 0 to 70° C GB60SFB 1000 Tx: 1550nm Rx: 1310nm SMF 60km LC -2 ~ +4 < -25 0 to 70° C GB80SFA 1000 Tx: 1310nm Rx: 1550nm SMF 80km LC -2 ~ +3 < -26 0 to 70° C GB80SFB 1000 Tx: 1550nm Rx: 1310nm SMF 80km LC -2 ~ +3 < -26 0 to 70° C