Satel CA-4v1 Manual
Text of the manual
Due to safety reasons, alarm system should be installed by qualified personnel only.
Because alarm system may contain hazardous items, its components should be kept out of
reach of unqualified personnel.
In order to avoid the risk of electric shock, read carefully this manual before proceeding to
installation. Any connections should be made in deene
CA-4V1 panel description
The alarm panel CA4-v1 is designed for small alarm systems. It is made in advanced
microchip technology in accordance with the latest trends in burglary signaling.
Its features:
• new generation, interference-resistant microchip,
• 4 programmable parametrical zones,
• 2 independent alarm outputs with programmable
Installation of the control panel
BOARD TERMINALS:
AC
– module power supply inputs (17...24V AC)
AUX
– detectors power supply output (+12V DC)
Z1 to Z4
– zones
OUT1 to OUT2
– signaling outputs
+KEY
– keypad power supply output
DATA, CLK
– keypad bus terminals
COM
– ground
It is required that the control panel be permanently conne
Connection of power supply
1. Connect the 230V alternating voltage leads to the transformer terminals marked
"AC 230V".
2. Connect the output voltage wires of the transformer secondary winding to the "AC"
terminals on the control panel main board.
3. Connect the wire of the electric shock protection circuit to the terminal block
provided next
