Videofied W730 Manual 

INSTALLATION MANUAL DOC. - REF. 230-W-WIP-AUS LAST MODIFICATION DATE : NOVEMBER 2016 FIRMWARE VERSION : XLP.07.07.15.XXX AND LATER 1

Description Since 2002, RSI VIDEO TECHNOLOGIES provides the only wireless video verification on the market, thanks to the Motion Viewer™ detectors and to the Videofied® product range. After 2 years of development, RSI VIDEO TECHNOLOGIES is proud to present the new W alarm panel. The W alarm panel is wireless and mains powered with a backup rechargeable battery (provided). The W panel is the first Videofied® alarm panel that can be used as a connected device. This panel is intended for residential and commercial markets. Like all the Videofied® alarm panels, the W panel is compatible with every radio device manufactured by RSI VIDEO TECHNOLOGIES. Technology The W alarm panel uses the S2View® patented technology. That interactive and wireless technology ensures signal integrity. The bidirectional radio link maximizes the signal reliability. AES encryption protects the communication between the panel and the devices. Transmission security is optimal. The jamming detection feature identifies any intentional jamming from a third party. The supervision feature consists of transmitting signals between every device of the system and the W alarm panel. Through the supervision, the detectors transmit every 8 minutes a presence signal. The entire RSI VIDEO TECHNOLOGIES team wishes you a successful installation. INTRODUCTION

Introduction................................................................................................2 Summary.........................................................................................................................3 1. W installation and setup.......................................................................................................4 1.1 Panel overview..........................................................................................................................................4 1.2 Panel mounting..........................................................................................................................................4 1.3 Ethernet cable connexion........................................................................................................................5 1.4 SIM card installation................................................................................................................................5 1.5 Powering and initialization......................................................................................................................5 1.6 Indicator lights...........................................................................................................................................6 1.7 Pairing the keypad..................................................................................................................................6 2. W panel programming.............................................................................................................................7 3. W panel features guide........................................................................................................................17 3.1 Get to access level 4........................................................................................................................17 3.2 How to arm/disarm the system...........................................................................................................17 3.3 Arming and siren mode configuration...............................................................................................18 3.4 Manage badges and access codes.....................................................................................................19 3.5 Delete a device from the system........................................................................................................21 3.6 Read the event log...............................................................................................................................22 3.7 Automatic arming/disarming...................................................................................................................22 3.8 Golden rules.............................................................................................................................................22 3.9 Additional features..................................................................................................................................23 4. Ethernet parameters...............................................................................................................24 5. Transmitter events list...........................................................................................................25 6. 2G3G error codes..................................................................................................................26 7. Security and certifications notes..........................................................................................27 8. Technical specifications..........................................................................................................29 SUMMARY

INSTALLATION MANUAL W & WIP Alarm panel 1.1 Panel overview SIM card installation Ethernet cable connection Status LEDs Mini-USB connector for power supply Battery connector 1.2 Panel mounting Fix the back casing on the wall using the three mounting holes (4 mm diameter) as shown. Mounting the panel is not required for programming. Bracket holes COM button INIT button Locking screws WIS100 Siren connector

INSTALLATION MANUAL W & WIP Alarm panel 1.4 SIM Card Installation Insert a Mini-SIM 2FF SIM card in the location shown in the image. Please refer to the markings for the insertion direction. Use a M2M (machine-to-machine) 2G3G SIM card. If the panel is used with a smartphone application, the SIM card shall be able to receive SMS. DO NOT insert or remove the SIM card while the panel is powered. 1.3 Ethernet cable connection Once the panel is fixed on the wall connect a RJ45 cable between the site internet network and the panel Ethernet port. When the panel attempts a transmission via Ethernet, a red LED on the connector will flash. This will allow the installer to check whether the panel is connected to a valid network. Do not touch the RJ45 cable when the panel is powered. IMPORTANT : Only connect the panel on 10Base-T SELV networks. Only for WIP 720/730 models 1.5 Powering and initialization AC Power • Connect the backup battery. • Install the power supply inside or outside the panel box depending on the needed cable length. • Connect the power supply to the panel mini-USB connector. • Plug the power supply in an electrical outlet. • Do not connect the 12V input (sealed by a label), specifically when the panel is powered. Initialization • Leave the panel open. The green status LED is on. Press and hold the INIT button for 6-7 seconds until the status LED turns red for 1 second. • The red LED blinks several times then turns off. That procedure resets the panel memory. • The panel is now reset, a Videofied® keypad has to be enrolled to configure the panel. Backup battery