Strymon DIG Quick Start Manual

MOD Sets the amount of modulation added to the delay lines. MIX Controls wet/dry mix for Delay 1. Full clockwise is 100% wet. MIX 2 Controls wet/dry mix for Delay 2. Full clockwise is 100% wet. BYPASS Engages and disengages effect. LED ON indicates the effect is engaged. TIME Controls the delay time for Delay 1. Acts as a master time control for both delays. TIME 2 Sets rhythmic subdivision relationship between Delay 1 and Delay 2. TAP Tap to set the master delay time. The TAP LED will flash to indicate the tempo. Hold TAP footswitch to engage circular repeats. REPEATS Increases the number of repeats for both delays. TYPE 24/96 – Modern, clean, and pure delay with subtle dynamics processing. adm – Early ‘80s adaptive delta modulation process, providing snappy, percussive delays. 12-bit – Mid ‘80s 12-bit conversion method gives you slightly darker and warmer delays.

EXP INPUT 9VDC + - RIGHT OUT LEFT OUT INPUT High impedance mono or TRS stereo input (internal jumper configurable). EXP Connect a standard TRS expression pedal for continuous control over any selectable knob parameter. To select the knob controlled by the expression pedal, hold the TAP footswitch during power up. The first knob turned is then assigned to the expression pedal. The maximum position the knob is turned up to becomes the expression pedal “toe down” maximum value. POWER Use an adapter with the following rating: 9VDC center negative. 250mA minimum. STEREO OUTPUTS Use left output for mono operation. ADD EVEN MORE CONTROL & FLEXIBILITY Connect the optional Strymon Miniswitch to remotely tap tempo or to quickly access a saved favorite setting. See strymon.net/support for more details.

CAVERNOUS DOTTED ‘80S DELICATE 12 BIT NOTE: Secondary functions are accessed by holding both footswitches while turning control knobs. 1 2 3 4 5 1. DELAY 1 SUBDIVISION Sets the tap tempo subdivision for Delay 1. Left for Dotted Eighth, center for Quarter note, right for Half note. 5. FILTER Sets the feedback filter response. Turn left for High Cut, center for Flat response, right for Low Cut. 2. SYNC/FREE MODE In Sync Mode (left) by default, Free Mode (right) disconnects Delay 2’s tempo for independent time control. 3. DELAY 2 REPEATS Sets the Delay 2 repeats. Turn fully right to Track Repeats which ties Delay 1 and Delay 2 repeats together. 4. CONFIG Turn left for Series, center for Ping Pong, or right for Parallel.