Southwestern Bell Freedom Phone GH2410C Owner's Manual

37 for more information about message waiting. 1. Press and hold the PROG to enter the menu. 2. Press to go to the message waiting programming option. 3. Press /EDIT to reset the message waiting indica-tion. will begin flashing. 4. Press /SAVE to delete the indication. A double beep will sound to confirm. 5. Continue with programming or press PROG to return to the idle screen. Deleting Message Waiting Indication DELETE Turning AUTO ANSWER On or Off 1. Press and hold the key 2. Press to go to the PBX m ...

CHOOSING A LOCATION When in any of the menus a number is listed here next to the sign. This number indicates the place in the list such as the 38th caller ID call or the 7th setting in the menu. When viewing caller ID entries the icon indicates that the same Caller ID number has called more than one time since Caller ID memory has last been reviewed. Next to the icon is a counter that indicates how many times that caller has called since the last review. The Total Call Counter will show the total number of Caller ID messages received the total number of phone ...

3 4 For the cordless handset, use only 3.6V 600mAh cordless telephone battery pack (included). Do not dispose of the batteries in a fire. The cells may explode. Check with local codes for possible special disposal instructions. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause Damage to the eyes or skin. It may be toxic if swallowed. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns. Do not a ...

Note: Belt-Clip The headset jack is located on the side of the handset and is a standard 2.5mm plug. Simply plug the headset into the jack and the headset will be active. When the headset is plugged into the telephone the microphone and earpiece on the handset are not active. Install the belt-clip as shown. HANDSET AND DATA JACK BASIC DISPLAYS 15 16 Headset Jack Handset ldle AM NEW TOTAL Line Muted MIN SEC Volume Control MIN SEC Call Timer MIN SEC Line Ringing New CID Received AM NEW TOTAL MIN SEC Off-hook NEW TOTAL ...

This equipment complies with FCC Regulations 15 and 68 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS-210. A label is located on the underside of the base unit containing either the FCC registration number and Ringer Equivalence Number (REN). You must, upon request, provide this information to your local telephone company. This equipment is compatible with inductively coupled hearing aids. FCC Part 15 Warning: Charges or modifications to this unit not expressly approved by the party responsible for compliance c ...

CHOOSING A LOCATION When in any of the menus a number is listed here next to the sign. This number indicates the place in the list such as the 38th caller ID call or the 7th setting in the menu. When viewing caller ID entries the icon indicates that the same Caller ID number has called more than one time since Caller ID memory has last been reviewed. Next to the icon is a counter that indicates how many times that caller has called since the last review. The Total Call Counter will show the total number of Caller ID messages received the total number of phone ...