Sony KX-1901 Operating Instructions Manual

retain it for f itg the set, please u ure reference. read this manual thoro For detailed · "ghly, aad b instruct· ooklet " SYS ions for s TEM CONNECTl~s~e;U~~~~.ections, see the sep . arate PROFEEL OWNER'S The model and R_ECORD numbers in the serial numbers are call upon spaces provid located at the your Sony d ed below Ref rear. Record th ealer regard' · er to them ese Model No. mg this pmdoct wheoe,e, yo" Serial No. CONTENTS Warning Precauti~~~ ........................ . ~~::~:: ~~;~::~;;;~ : ::: :: :: ::::: :::::: ::: :::: ::: ' ' ' Looat,ooaodf m ,,,,,,,, ,,,,,,,,,,,,,, ,, ...... , 2 Specification unction ...

rain or moisture. Dangerously high voltages are present inside the set. Do not open the cabinet. Refer servicing to qualified per- sonnel only. PRECAUTIONS • Operate only on 120 V ac. • This set is equipped with a polarized AC power cord plug (one blade of the plug is wider than the other), which will fit into the power.outlet only one way. Should you be unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to to fit, contact your dealer for assistance. Do not defeat the safe- ty purpose of the polarized plug. • Should any liquid or solid ...

A color video monitor designed for a variety of uses with a Sony Component TV tuner, Sony Betamax videocassette recorder, video camera, character generator, microcomputer, etc. Two built-in audio amplifiers provide dynamic sound from an externally connected speaker system (optional). When the Component TV is used with a Component TV tuner, the volume, picture and power can be controlled from the tuner or the Remote Commander (supplied with the tuner). The KX-2501 also features: Dynamic Picture system adjusts picture contrast automatically to produce more detail in both bright and dark areas of every scene. Smoked glass o ...

(behind panel) KX-1901 rear view 0 MASTER button 8 POWER lamp @ POWER button 0 MUTING lamp -------'--0 RGB lamp f) PICTURE buttons @ VOLUME buttons '---- 0 BRIGHTNESS control ----- 41) COLOR control --- - --- 48 HUE control --- ----- 40 SHARPNESS control - - -------- 411 V (vertical) HOLD control ti) RGB MULTI INPUT connector·----------... ---------- -- Cl) AUDIO INPUT jacks ----- - -----='---t--===~ae=::::.~ VIDEO INPUT jack J)))))J) 4D INPUT LEVEL control «;) CONTROL INPUT jack @> MUL Tl INPUT--- connector W SPEAKER terminals { I G: I i. I ,, - RG8Ml,LTll"ll>,JT - ··- INPUT - • :- '"'!"'"- l 'IIOEO ...

Normally set this control at the center detent position. The newly-developed Dynamic Picture system makes it unneces- sary to make frequent adjustments. for less bright- ness too dark Ci) COLOR control ~ lo, morn b1fghfoess BRIGHTNESS good picture too bright Adjusts the color intensity. Normally set this control at the center detent position. for less color too pale 4D HUE control COLOR good picture for more color too vivid Adjusts the hue to give the most natural skin tones. Normally set this control at the center detent position. Skin tones become purplish. purplish skin ~ HUE good picture Skin tones become ...

This connector allows a character generator, microcomputer, or a special adaptor for future multiplex letter information broadcasts having digital RGB outputs to be connected. The connector cover has been attached to this connector at the factory. When this connector is not in use, keep the cover attached. Alil+I--- If the cover is removed, blanking of the composite video signal cannot be made when the NORMAL/RGB button is set to RGB. When such equipment having digital RGB outputs is connected to this connector, disconnect the connector cover and proceed as follows by using the supplied 34-pin socket. !34-pin ...

1. Attach the socket to the cover B. with the positions 1-17 upwards Engage the projections with the holes. 2. Attach the cover A to the socket with the 2 shorter screws. Engage the projections with the holes. 3. Attach the cord clamper with the 2 longer screws. (4) Connect the socket to the RGB MUL Tl INPUT connector. Engage the projection with this slot. For the signal specifications, see page 12. Example Microcomputer R ,I,. G ,I,. B ,I,. H sync ,I,. Component TV 34-pin connector Level select (21) Ground (4) Red (25) Ground (8) Green (26) Ground (9) Blue (27) Ground (10) H sync (30) Ground (13) V sync o-+--,--"T

Connect to the MULTI OUTPUT (8-pin DIN) connector on a Sony Component TV tuner with the VK-2D Video Cable (supplied with the tuner, 2 m). The audio, video and control signals can be connected simultaneously with this cable. The volume and picture can be adjusted and the power can be turn- ed on or off using the controls on the TV tuner or the Remote Com- mander (supplied with the tuner). Engage this projection with this slot. To disconnect, push this button. VK-2D The VK-5DX Video Cable is available optionally for extending the VK-2D. Caution: Use either the VIDEO/AUDIO/CONTROL Cl) 4D 41) jacks or the MULTI INPUT c ...

Connect to a convenient 120 V ac wall outlet. When the set is used with a Sony Component TV tuner, the ac power cord may be connected to the UNSWITCHED AC OUTLET. Component TV tuner Ba.II& ; to UNSWITCHED AC OUTLET Component TV - fj POWER LOCK switch Normally set to OFF. I I I I ___ _) to ac wall outlet The MASTER and POWER buttons functions as described above. If the set is to be switched on or off by a timer, set this switch to ON and keep the MASTER button pushed in. When power is supplied to the set with the POWER LOCK switch and MASTER button set to ON, the set will turn on automatically. tJl BASS BOOST switch When a bookshelf-ty ...

diagonally, 100-degree deflection KX-2501: 25-inch picture measured diagonally, 114-degree deflection VIDEO INPUT (phono jack) 1 V p-p, NTSC, 75 ohms, unbalanced, sync negative AUDIO INPUT (2 phono jacks) - 5 dBs (436 mV rms), 47 kilohms CONTROL INPUT (minijack) 5V p-p MULTI INPUT (8-pin DIN) Same as the above VIDEO/AUDIO/ CONTROL INPUTS RGB MULTI INPUT (34-pin plug) Pin No. Signal Signal level 21 Level select High state (open): for 1 V p-p Low state (ground): for TTL level 25 Red input Positive polarity 26 Green input 0 1 V p-p :f dB, 75 ohms termina ...

120V ac, 60 Hz KX-1901: 142 W (max.) 93 W (average) KX-2501 : 180 W (max.) 132 W (average) KX-1901: Switched, max. 250 W KX-2501 : Switched, max. 200 W KX-1901 : Approx. 504 x 452 x 480 mm (w/h/d) (197/8 x 177/8 x 19 inches) KX-2501 : Approx. 660 x 560 x 487 mm (w/h/d) (26 x 221/8 x 191/4 inches) KX-1901: Approx. 33 kg . (72 lb 12 oz) KX-2501 : Approx. 55 kg (121 lb 4 oz) Video Cable VMC-1S (phono plug to phono plug, 1.2 m) Connecting Cord RK-105A (miniplug to 2 phono plugs, 1.5 m) 34-pin socket 1 set Design and specificati ...