Volt VSM-2407 Installation Instructions Manual

VOLT® Path & Area Light Stem VSM-2407 & VSM-1203 INSTALLATION INSTRUCTIONS Specifications and product details subject to change without notice. © Copyright 2018, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved. [email protected] • 813.978.3700 Help Hotline: 1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST) - 1 - all-guide s.com

VSM-2407 & VSM-1203 Important: Please Read Before Installation Important Safety Instructions INSTALLATION INSTRUCTIONS This fixture is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty. These instructions do not intend to cover all variations in installation, operation maintenance or mounting situations. 1. Make sure that the power is turned OFF before installing or servicing this fixture. 2. Warning: this fixture is not intended to be installed within 10 feet [3 meters] of a pool, spa or fountain. 3. This fixture is intended to be used only with a power supply (transformer) rated maximum of 300 watts (25 AMPS) at 15 volts. 4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in order to connect to the main low voltage cable. 5. Wiring connections must be made with wire connectors that are suitable for outdoor use. 6. Position the wire connector so that it is located within 6 inches (15.2 cm) from a building structure, a luminaire, or fitting. LIGHTED LAMP IS HOT! WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS. 1. Turn off/unplug and allow to cool before reducing lamp. 2. Lamp gets HOT quickly! 3. Do not touch the hot lens, guard or cowl. 4. Keep lamp away from materials that may burn. 5. Do not touch lamp at any time. 6. Use a soft cloth. 7. Oil from skin may damage lamp. 8. Do not operate the fixture with a damaged or missing lens or shield. ! ! w w w . v o l t l i g h t i n g . c o m - 2 -

[email protected] • 813.978.3700 2.5” 9” - 3 - 22.5” Parts Required (sold separatly) A. (1) Hat B. (1) Bulb C. Stake Max Spread Hat Pictured Here

INSTALLATION INSTRUCTIONS Remove Stem Top 1 Loosen the stem top and remove it from the stem. Stem Top Stem - 4 - Install Bulb 2 Insert the bulb with correct wattage and type marked on the fixture label and push firmly into place. CAUTION: Do not exceed maximum wattage marked on luminaire label. Socket Bulb Place the stem top over the bulb and thread the stem top onto the stem. Hand tighten until snug. Install Stem Top 3 Stem Top Stem VOLT® Path & Area Light Stem VSM-2407 & VSM-1203

- 5 - Install Stake 4 Determine the desired location for mounting the fixture. Hammer the stake into the ground until the flange of the stake is flush to grade. To avoid damage to the stake, place a board on top of the stake while hammering. NOTE: If the ground is hard and the stake is difficult to install, make a crosscut in the ground using a flat shovel. Board Stake Soil Ground Clear away an area in the ground at the wireway slot on the top of the stake. Lay the luminaire pigtail into the wireway slot and attach the stem onto the stake. Tighten until snug. Install Stem to Stake 5 Stem Stake Pigtail Wireway Slot

- 6 - Wire Connection 6 Strip both leads from the luminaire pigtail. Using two wire connectors (sold separately), connect the leads from the luminaire to the main supply cable leads. Pigtail Main Supply Cable Wire Connectors Install Hat 7 Place the hat of your choice onto the stem top and secure it with the finial. Hand tighten until snug. Shield Finial Hat of your choice Install/Replace Bulb Remove the finial, hat and stem top to expose the bulb. Replace it with the correct wattage and type marked on the fixture label. Then, reinstall the stem top and hat. IMPORTANT: Bulbs must be protected from moisture and dust at all times. Always reinstall the stem top and hat when removed. VOLT® Path & Area Light Stem VSM-2407 & VSM-1203 all-guide s.com

© Copyright 2018, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved. [email protected] • 813.978.3700 w w w . v o l t l i g h t i n g . c o m Help Hotline: 1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST) - 8 -