ABB ABB-free home Quick Start Manual

How the system is to be made opera- tional will be demonstrated briefly by means of a 2-way circuit. For the mini- mum requirement of a 2-way circuit see the above graphics. Note: The devices must have been installed and con- nected for the subsequent programming process! Wired communication Sensor Sensor PS System Access Point Two-wire bus cable 230 V cable Power supply ABB- free@home- Touch Smartphone Tablet Valve drive with battery Window contact Sensor/actuator unit Actuator Sensor/actuator unit Wireless communication 提示 对于无线设备，也可以通过分机输入端及 常规开关实现换向电路。 Note For the wireless devices the two-way circuit can also be implemented via the extension unit input with a conventional switch. free@home | 03

1. 接通 System Access Point 电流。 必须激活接入点模式（左侧 LED 亮起 -> 否则，请按下左侧按键）。 1. Energize the System Access Point. The access point mode must be activated (left LED lights up -> otherwise press the left button). 04 | free@home

Point 的 WLAN (SSID: SysAPXXXX) 。输入密码 -> 参见 System Access Point 内侧压印内容（电源）。（为 此，打开罩子） 2. Connect the terminal device with the WLAN of the System Access Point (SSID: SysAPXXXX). Enter the pass- word -> see text on the interior side of the System Access Point (open the cover). free@home | 05

3. 打开互联网浏览器。在浏览器地址栏内 输入 “IP 192.168.2.1”。 3. Open the Internet browser. Enter „IP 192.168.2.1“ in the address line of the browser. 06 | free@home

提示：如果客户设备中配有 System Access Point，则应将其连入客户网 络！ 4. The connection to the System Access Point has been established. Note: If the System Access Point re- mains in the system of the customer, it should be integrated into t he customer‘s network! free@home | 07

1. 接通 free@home 无线设备的电源电压 à 设备现处于示教模式 30 分钟 2. 钟2. 在 System Access Point 用户界 面上选择“系统设置 -> free@home 无线 -> 查找设备” à System Access Point 现在依次扫描所 有 free@home 无线信道。处于示教模 式下的设备将自动连入系统。在找到最 后一个设备后，扫描过程还将持续 10 分钟。 3.在用户界面上的“设备列表”中列出已 连入的设备。按照序列号检查是否已找 到所有安装的设备。 4.如有未找到的设备，则其可能未处于示 教模式。原因可能是 a. 示教时间已结束 b. 该设备已与另一系统匹配 将该设备复位至出厂设置，并重启扫描 过程 复位至出厂设置 1. 将 free@home 无线设备断电 2. 按住左下按键 3. 重新接通设备电流 à� LED 慢闪 10 秒，再快闪 5 秒，然后 熄灭 à 已恢复出厂设置，可以重新示教该设备 注释： 释不得将已处于出厂状态的设备 再次复位。LED 在步骤 3 中保持关闭状 态。 提示： 我们将不断完善 free@home，以便 为您提供新功能或排除故障。 请访问 www.busch-jaeger.com 获取最 新更新，或者访问 my.abb-livingspace. com 注册您的系统，即可自动告知您新的 软件更新，并获得免费测试 free@home 远程访问一个月的机会。 08 | free@home

the free@home wireless devices à The devices are now in programming mode for 30 minutes 2. In the user interface of the System Access Point select „System settings -> Search for free@home wireless -> devices“ à The System Access Point now consec- utively scans all free@home wireless channels. Devices that are in program- ming mode are integrated automati- cally into the system. The scanning process ends 10 minutes after the last device has been found. 3. Integrated devices are listed in the „Device list“ of the user interface. Use the serial numbers to check whether all installed devices have been found. 4. If a device has not been found, it may not have been in programming mode. The reason for this could be that a. the programming time has expired b. the device has already been coupled with a different system Reset the device to the factory settings and start a new scanning process Resetting to factory setting 1. De-energize the free@home wireless device 2. Keep the button at the bottom left pressed 3. Re-energize the device à The LED flashes slowly for 10 sec- onds, then fast for 5 seconds and then goes out à The factory settings have been restored and the device can now be programmed again Note: Devices which are already in fac- tory settings are not reset again. The LED remains out in step 3. Note: The development of free@home is continuous in order to offer you new functions or to rectify errors. Pay us a visit at www.busch-jaeger.com to inform yourself about current updates, or register your system at my.abb-living- space.com to be automatically informed about new software updates and to test the free@home remote control for one month at no charge. free@home | 09

initial commissioning: - Language - Site - Time / Date - User name / Password - Name of installation Attention! Create user access. 10 | free@home

tion. The menu items must be processed from left to right. The steps follow each other consecutively. free@home | 11

创建包含所有楼层和房间的住房/建筑数据图。使用该图分配现有设备功能及其安装地 点。 Creation of a digital image of the apartment / house with all floors and rooms. Assigning a function to the existing devices and their mounting position. 1. 创建楼层 通过拖拽将元素拖入工作面。 1. Create floors Pull elements into the working area via drag & drop. 12 | free@home

Pull elements into the working area via drag & drop. free@home | 13

1. Pull the switch actuator from the „Add device“ bar into the working area via drag & drop. 可识别已连接到系统的设备，从而在相应房间内分配设备功能。 Devices connected to the system can be identified by assigning them in the room according to their function. 14 | free@home

It only lists devices that are suitable for the application. free@home | 15

择识别标签上和左侧列表中的 3 位数 短码。 3. Identify switch actuator -> Compare serial number. Select a short 3-digit number on the identity label from the listing on the left. 4. 分配名称 -> 4. Assign name -> 16 | free@home

6.* A popup window opens automati- cally. It only lists devices that are suitable for the application. Identify sensor unit -> Actuate (left) rocker of the device or select short 3-digit number from the identity label. 分配传感器单元： 5.* 通过拖拽将“添加设备”栏内的传感 器拖入工作面 Allocation of sensor unit: 5.* Pull the sensor from the „Add de- vice“ bar into the working area via drag & drop. 7.* 自动选择设备（使用多信道执行器时 = 选择信道） 分配名称 -> 7.* The device is selected automatically Assign name -> * 提示：仅示例中的有线设备需要换向电路 * Note: Necessary only for wired devices for the example of a two-way circuit free@home | 17

可根据分配相互连接已添加的传感器和执行器。 Sensors and actuators created under assignment can be linked. 为了在传感器单元和已连接到传感器/执行器单元的用电器之间建立连接，应执行下列 操作： To link the sensor unit with the connected consumer on the sensor/actuator unit, proceed as follows: 传感器/执行器 = 传感器/执行器单元 Sensor/actuator unit 传感器单元翘板开关 Rocker sensor unit 18 | free@home

3. 显示蓝色连接线，该线用于显示设备之 间的连接 -> 将配置传输至设备并勾 选确认。 提示：已预先编程传感器/执行器单 元。因此，已预先建立翘板开关和位于 其下方的执行器之间的连接（参见虚线 连接）。 3. A blue connecting line appears to indicate the link between the devices -> Transmit the configuration to the devices Note: Sensor/actuator units are pre- programmed. Which means that the link between the rocker and actuator below it has already been allocated (see dotted link). free@home | 19

Note: We reserve the right to make technical modi- fications to products as well as changes to the content of this document without prior notice. The respective agreed-upon conditions apply to orders. ABB accepts no responsibility for possible errors or incompleteness in this document. We reserve all rights to this document and the topics and illustrations contained therein. Dupli- cation, disclosure to third parties or the use of its contents – and of parts thereof – is forbidden without prior written approval from ABB AG. Copyright © 2016 ABB All rights reserved A member of the ABB Group Busch-Jaeger Elektro GmbH P.O. Box 58505 Lüdenscheid Germany Freisenbergstraße 2 58513 Lüdenscheid Germany www.BUSCH-JAEGER.com [email protected] Central sales service: Phone +49 2351 956-1600 Fax +49 2351 956-1700