ABB SM1000 Quick Start Manual

• Select the Channel Source • Set the Input Filter Type: Instantanteous or Max. and Min. Values during the sample interval. • Select the input type, linearizer, ranges and tag name • Select the Alarm type, set the alarm trip points, the tag and the hysteresis. • Set the Count Rate, Preset & Predetermined Count values Channel n.n Channels 1.1 - 1.6 Set Up Analog I/P Totalizer Alarm A Alarm B Time Common Chart Digital Bar Process • Set the Mains Rejection Frequency • Select the Relay Source and the Relay Polarity • Select the Analog Output Source & Ranges • Select the Digital Output Sources & Polarity I/O Modules Note. Modules fitted are detected automatically A:Analog I/P B:Relay C:Hybrid I/O Modules .cfg Save as Current Configuration Save Configuration Cancel Exit .cfg Internal Storage External Storage Archive • Set the Archive File Enables – i.e. the files to be archived • Set the Filename Tag • Set the New File Interval (hourly, monthly or none) Connection Details SM1000 – QUICK START GUIDE Configuration Operator 1 Operator 2 Operator 3 Operator 4 User 1 Use the up and down keys to select your password. Confirm with Enter key 0000 User 1 Edit Current Configuration Open Configuration New Configuration Cancel Disable Recording in Configuration Main Configuration Menu QuickStart Template Summary Channels 1.1 to 1.6 QSMilliAmp 4 to 20mA inputs, 0 to 100.0 units QSTHC_C or QSTHC_F Thermocouple type K 0 to 1000°C or 0 to 1000°F QSRTD_C or QSRTD_F Pt100 inputs 0 to 1000°C or 0 to 1000°F QSFlow 4 to 20mA, 0 to 180 l/hr, Totalizer enabled QSDairy Delayed High/Low Process Alarm Engineering Range –10 to 90°C Configuration File Common Group 1 Channels 1.1 - 1.6 Group 2 Channels 2.1 - 2.6 Functions I/O Modules Exit Chart speed Sample Rate On board storage 10 mm/h 60s 12 months 20 mm/h 30s 6 months 6 60 mm/h 10s 2 months Channels 120 mm/h 5s 30 days Enabled 240 mm/h 2s 14 days 720 mm/h 1s 6 days Group 1 Recording 4 Set the Sample Rate 5 Select the Views Required and the Operator Menu Choices 6 Set Up the Archive Files 7 Change the Channel Configurations 1 Make Connections & Power-up the Instrument 2 Select the Configuration Level and a Quick Start Template 3 Set the Time and Date 8 Set Up I/O 9 Exit Configuration and Save Changes 10 Start Recording! Note. For detailed information on setting all configuration parameters, refer to the SM1000 User Guide, part number IM/SM1000.

I/O Modules Functions Set Up • Source ID • Input Filter Type • Recording Enable Analog I/P • Input Type • Tags, Units & Values • Linearizer • Fault Detection Digital I/P • ON Tag • OFF Tag Alarm A • Type, Source, Tag, • Trip Level Alarm B • Hysterisis • Alarm Groups Totalizer • Source • Count Rate, Cut-off, Direction • Tag Name • Totalizer Units • Count, Preset, Intermediate & Predermined Values A:-Analog I/P • Mains Rejection Frequency • Input Scale/Offset Adjust C:-Relay • Source & Polarity C:-Hybrid • Digital Output Source & Polarity • Analog Output Source, Electrical Range, Engineering Range C:-RS485 • Protocol • 2-/4-Wire • Baud Rate • Parity C:-Ethernet • IP Address • Sub-net Mask email 1 • Default Gateway • FTP Username/Password email 2 • Channels Report • Totalizers Report • External Media Report Linearizer • Breakpoints RTA1 • On Time • Duration RTA2 • Weekly Enables RTA3 RTA4 Process Groups 1 and 2 Common Configuration Set Up • Configuration Type • No. of Process Groups • Language • Global Alarm Acknowledge Source Time • Current Date/Time • Daylight Saving Security • Usernames • Passwords • Config. Access Method Logs • Alarm, Totalizer & Audit Log Sizes Operator Messages • Tag Name • Activating Source • Add to Event Log Enable Recording • Group Tag • Sample Rates • Recording Enable Chart • Annotations • Chart Divisions • Screen Interval • Operator Menu Options Bar • Display On/Off & • Operator Menu Options Process Digital Archive • Channel Data, Log Archive Options • Filenames • Archive Rates (Advanced Config. Only) Process Group 1 Process Group 2 Logs Chart View Bar View Indicator View Process View Alarm Event Log Totalizer Log Audit Log Configuration Set up Historical review View select Operator messages Chart annotation Screen interval Scales Trace select Channel select Max/Min reset Totalizer stop/Go Totalizer reset Filter Alarm acknowledge                                         Setup Operator messages Alarm acknowledge 1 - 6 7 - 12 13 - 18 19 - 24 Start of batch End of batch Standby mode active Cleaning in progress No message No message OPERATOR FUNCTIONS CONFIGURATION OVERVIEW The Company's policy is one of continuous product improvement and the right is reserved to modify the information contained herein without notice. © ABB 2004 Printed in UK (01.04) ABB Limited Howard Road, St. Neots Cambridgeshire, PE19 8EU UK Tel: +44 (0)1480 475 321 Fax: +44 (0)1480 217 948 IM/SM1000–Q Issue 3