Proteco RT37 Manual 

WKPAD Wireless Keypad was designed for wireless entry. With the keypad, you can select up to 12 most popular rolling code and 13 brands fixed code remote in the world. The password can keep the keypad work with security. 1 Password Input and Change The default passwords are “8888” at factory. Samples: Change default passwords as “1234” （four personal identification number） 1 With the WKPAD as default setting, the passwords is “8888” 2 Sequentially press buttons “PIN + 8888”, WKPAD read the passwords and confirm if the passwords are correct. The WKPAD beep 1s to indicate confirm ok. Continue press button “PIN + 1234”, the WKPAD record the new passwords, press button “PIN + 1234” again, WKPAD confirm both passwords matched, WKPAD beep again and the passwords was changed as “1234” successfully. NOTE :Keep the new password in mind for next access. Reset as default passwords: Remove the battery first. Press the key “8”and holding. Reinstalled the battery into box, the WKPAD will beep 1s. The passwords are reset as default passwords, “8888” 2 WKPAD learn 1 The WKPAD can work as 2 channels remote with the button “PIN” or “OK”. 2 Before the WKPAD can work with the receiver, the remote brands must be selected by DIP switch and the code must be learnt into the receiver first. The brands selection shows as Table1. 3 After the brand have been selected, sequentially press key “OK + CCCC + PIN”, (“CCCC” are current passwords),WKPAD send necessary code into receiver and channel 1# is learn successfully. Press key “OK + CCCC + OK”, WKPAD send necessary code into receiver and channel 2# is learn successfully.

1 Open the front cover of the keypad, select the dip position as . Now the brand is changed as BFT rolling code. The passwords have been changed as “1234” 2 Ready the receiver BFT, press buttons “OK + 1234 + OK”, the backlight flash to indicate passwords input correct. The WKPAD channel 2# should be entry into BFT receiver successfully. 3 Press button “1234 + OK”, the BFT receiver channel 2# should works. 4 At step 2, press buttons “OK + 1234 + PIN” the WKPAD channel 1# should be entry into BFT receiver successfully. Press “1234 + PIN”, the BFT receiver channel 1# should works. 3 WKPAD work Press buttons “CCCC + PIN”, the WKPAD works as channel 1#. Press buttons “CCCC + OK”, the WKPAD works as channel 2#. WKPAD send corresponding brand and button code to receiver for work. The button codes show as Table1. NOTE 1 All buttons must be pressed sequentially within 1s. 2 WKPAD beep once every button pressed.

Brand keypad Press Sequence Remote Button Work channel 1 BFT Rolling code CCCC + PIN 0x02 Channel 1# CCCC + OK 0x04 Channel 2# 2 NICE SMILO Rolling code CCCC + PIN 0x02 Channel 1# CCCC + OK 0x04 Channel 2# 3 BENICA Rolling code CCCC + PIN 0x02 Channel 1# CCCC + OK 0x04 Channel 2# 4 DEA Rolling code CCCC + PIN 0x02 Channel 1# CCCC + OK 0x04 Channel 2#

0x02 Channel 1# CCCC + OK 0x04 Channel 2# 6 GiBiDi Rolling code CCCC + PIN 0x02 Channel 1# CCCC + OK 0x04 Channel 2# 7 NOVOFERM CCCC + PIN 0x02 Channel 1# CCCC + OK 0x06 Channel 2# 9 FAAC Rolling code CCCC + PIN 0x02 Channel 1# CCCC + OK 0x04 Channel 2# New brands will be available at next version 12 APRIMATIC Rolling code CCCC + PIN 0x05 Channel 1# CCCC + OK 0x0A Channel 2#

0x02 Channel 1# CCCC + OK 0x04 Channel 2# 15 FOX Rolling code CCCC + PIN 0x02 Channel 1# CCCC + OK 0x04 Channel 2# New brands will be available at next version item DIP selection for brand Brand keypad press Sequence Remote Button Work channel 1 PROTECO Fixed code CCCC + PIN 0x00 Channel 1# CCCC + OK 0x02 Channel 2# 2 DITEC Fixed code CCCC + PIN 0x0E Channel 1# CCCC + OK 0x0D Channel 2#

3 MOTORLINE Fixed code CCCC + PIN 0x04 Channel 1# CCCC + OK 0x05 Channel 2# 4 PRASTEL Fixed code CCCC + PIN 0x01 Channel 1# CCCC + OK 0x02 Channel 2# 5 ROLTORE Fixed code CCCC + PIN 0x0E Channel 1# CCCC + OK 0x0D Channel 2# 6 NICE FLOW Fixed code CCCC + PIN 0x01 Channel 1# CCCC + OK 0x02 Channel 2# 7 KINGATE Fixed code CCCC + PIN 0x0E Channel 1# CCCC + OK 0x0D Channel 2# New brands will be available at next version

0x07 Channel 1# CCCC + OK 0x0B Channel 2# 9 KEY Fixed code CCCC + PIN 0x0A Channel 1# CCCC + OK 0x06 Channel 2# 10 ROGER Fixed code CCCC + PIN 0x01 Channel 1# CCCC + OK 0x02 Channel 2# 11 TANGO2 Fixed code CCCC + PIN 0x01 Channel 1# CCCC + OK 0x02 Channel 2# 12 MARANTEC Fixed code 433.92MHz CCCC + PIN Independent remote code for Channel 1# CCCC + OK Independent remote code for Channel 2# New brands will be available at next version

Independent remote code for Channel 1# CCCC + OK Independent remote code for Channel 2# 17 LIFT MASTER Motor lift 433.92MHz CCCC + PIN Independent remote code for Channel 1# CCCC + OK Independent remote code for Channel 2# 18 LIFT MASTER Motorlift 868MHz CCCC + PIN Independent remote code for Channel 1# CCCC + OK Independent remote code for Channel 2# 19 LIFTMASTER Lobas 433.92MHz CCCC + PIN Independent remote code for Channel 1# CCCC + OK Independent remote code for Channel 2# 20 LIFTMASTER Lobas 315MHz CCCC + PIN Independent remote code for Channel 1# CCCC + OK Independent remote code for Channel 2#

Independent remote code for Channel 1# CCCC + OK Independent remote code for Channel 2# 22 LIFTMASTER Motorlift 433.92MHz CCCC + PIN Independent remote code for Channel 1# CCCC + OK Independent remote code for Channel 2# 24 V2 433.92MHz CCCC + PIN 0x01 Channel 1# CCCC + OK 0x02 Channel 2# 25 V2 868MHz CCCC + PIN 0x01 Channel 1# CCCC + OK 0x02 Channel 2# 26 SOMMER 868MHz CCCC + PIN 0x02 Channel 1# CCCC + OK 0x04 Channel 2# 27 CARDIN CCCC + PIN 0x02 Channel 1#

0x04 Channel 2# New brands will be available at next version 28 SOMMER 433.4MHz CCCC + PIN 0x02 Channel 1# CCCC + OK 0x04 Channel 2# 29 CARDIN 434MHz CCCC + PIN 0x02 Channel 1# CCCC + OK 0x04 Channel 2# New brands will be available at next version

2 DIP at up position, the WKPAD entry into clone mode. The brands show in Table2. 1 Select the brand will be cloned, then press CCCC + PIN for clone channel 1# or CCCC + OK for channel 2#. 2 Press the original remote until the WKPAD flash to show clone successfully. 3 The WKPAD will exit learn mode after 4 seconds without valid remote learnt. CLONE TRANSMIT After finish cloned, the brand can work same as original brand. 1 Put the most left DIP down position. 2 Press CCCC + PIN for clone channel 1# or CCCC + OK for channel 2#, the WKPAD works same as original remote. NOTE: The clones transmit brands can NOT be selected by the DIP switches. It’s same as the brand while clone mode. For example: a. Select for clone universal rolling code 433.92MHz. b. Press CCCC + PIN for clone channel 1#; c. Put most left DIP at down position, , now the WKPAD work as clone transmit mode. It work perfectly same as the code just be cloned. d. Only one brand can be cloned or works. If another brand be cloned, the previous brand will be overwritten.

Brand keypad Press Sequence Work channel 1 FAAC 868MHz SLH CCCC + PIN Channel 1# CCCC + OK Channel 2# 2 HORMAN MARANTEC FAAC 868MHz CCCC + PIN Channel 1# CCCC + OK Channel 2# New brands will be available at next version 3 UNIVERSAL FIXED CODE 433.92MHz CCCC + PIN Channel 1# CCCC + OK Channel 2# 4 DITEC 433.92MHz CCCC + PIN Channel 1# CCCC + OK Channel 2#

Channel 1# CCCC + OK Channel 2# 6 CLEMSA 433.92MHz CCCC + PIN Channel 1# CCCC + OK Channel 2# 7 MARANTEC 433.92MHz CCCC + PIN Channel 1# CCCC + OK Channel 2# New brands will be available at next version 8 UNIVERSAL ROLLING CODE 433.92MHz CCCC + PIN Channel 1# CCCC + OK Channel 2# 9 V2 433.92MHz CCCC + PIN Channel 1# CCCC + OK Channel 2#

Channel 1# CCCC + OK Channel 2# 11 UNIVERSAL FIXED CODE 306MHz CCCC + PIN Channel 1# CCCC + OK Channel 2# 12 UNIVERSAL FIXED CODE 310MHz CCCC + PIN Channel 1# CCCC + OK Channel 2# New brands will be available at next version 13 UNIVERSAL FIXED CODE 315MHz CCCC + PIN Channel 1# CCCC + OK Channel 2# 14 UNIVERSAL FIXED CODE 330MHz CCCC + PIN Channel 1# CCCC + OK Channel 2#

Channel 1# CCCC + OK Channel 2# 16 UNIVERSAL FIXED CODE 318MHz CCCC + PIN Channel 1# CCCC + OK Channel 2# Proteco S.r.l. Via Neive, 77 - 12050 CASTAGNITO (CN) ITALY Tel. +39 0173 210111 - Fax +39 0173 210199 - [email protected] - www.proteco.net