Dynojet Power commander III Installation Instructions
Read Online
Read the Dynojet Power commander III Installation Instructions online using the built-in PDF viewer.
Text of the manual
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com
Parts List
1
Power Commander
1
USB Cable
1
CD-ROM
1
Installation Guide
1
Power Adapter
2
Power Commander Decals
2
Dynojet Decals
1
Velcro® Strip
1
Alcohol Swab
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
The ignition MUST be turned
OFF before installation!
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Button Adjustment Display
Faceplate Buttons
Expansion Port
USB Port
i113-411
02-04 Honda CBR 1100 XX (2001-2004 European Model) - PCIII USB - 1
2002 - 2004 HONDA CBR 1100 XX
(2001 – 2004 European Model)
Plug the PCIII connectors in-line of
the stock connector (Fig. B).
5
Attach the ground wire from the PCIII
to the NEGATIVE side of the battery
(Fig. C).
1
Remove the seat.
2
Lift the front of the fuel tank up.
3
Unplug the grey connector from the
wiring harness (Fig. A). This connec-
tor is located on the left hand side of
the bike and comes from the throttle
bodies.
Fig. B
Fig. C
Fig. A
i113-411
www.powercommander.com
02-04 Honda CBR 1100 XX (2001-2004 European Model) - PCIII USB - 2
Unplug this connector
PCIIIr connectors
Stock connector
Ground wire from PCIII
PCIII harness
With the supplied self adhesive vel-
cro, attach the PCIII onto the top of
the ECU (Fig. D). Make sure to clean
both surfaces first with the supplied
alcohol swab.
7
Bolt the front of the fuel tank back
down. Install the seat.
Fig. D
i113-411
www.powercommander.com
02-04 Honda CBR 1100 XX (2001-2004 European Model) - PCIII USB - 3
