Point Mobile PM80 Quick Start Manual

PM80 Front Touch screen Scan key LED indicator Front camera Menu keys Camera & Flashlight Battery cover lock MSR Battery cover Speaker Package contents Device Stylus pen with Tether AC/DC Adaptor (AC plug) Battery Wrist Strap LCD protection film Device layout Device layout Installing/ Removing Micro SD card Removing battery Device layout Charging the battery Menu keys Installing battery Standard accessory Optional accessary Exit window Recents key Home key Back key Function key Back Up/down & sides Volume Up/Down I /O Connector DC socket Headset jack Power key Scan key Scan Key Recents key • Tap to open the list of recent apps. Home key • Press to return to the Home screen while running apps • Press to return to the Home screen from other screens • Press and hold to launch internet Back key • Tab to return to the previous screen or to close current screen (dialog box, option menu, notification panel, etc) Function key • Press to set functions on keys • Press to create shortcut of programs   Rotate lock to counter clockwise and pull up the battery cover by holding both sides at bottom. 1. Insert battery, top first, into the battery compartment. 2. Hold the ribbon and lift upward to remove battery 4. Insert battery cover, top first and press it in the order named on the picture. Then press down on battery at the center again. 3.         Installing Micro SD card 1. Remove battery from device and insert Micro SD card. 2. Insert battery again after installing Micro SD card. Removing Micro SD card 1. Press Micro SD card gently and slide it out. 2. Remove Micro SD card from device. 3. Insert battery again. Micro SD card is not standard/optional accessory. Do purchase it from distributor. Device supports storage extension upto 32GB with Micro SD card. Turn off the device before removing battery. Due to installing/removing battery, save the working data first and then install or remove Micro SD card. • • • • • • • Insert plug on AC/DC Adaptor and connect to electric socket to charge. LED indicator on upper left of device shows red light while charging and it turns to green light when the device is fully charged. Use only items provided in your purchase for charging. You can also charge the device with optional accessory, cradle 5V 2A AC/DC Adaptor AC plug(US/EU/UK) SSC(Single Slot Cradle) 4SBC(4 Slot Battery Charger) I/O USB Sync cable Extended Battery(4000mA) 4SC(4 Slot Cradle) LCD protection film Stylus pen with Tether Wrist Strap Battery (3000mAh) For more details of product information and user guide, please refer to our website (www.pointmobile.co.kr)

Standard features Resetting the device Setting the date and time Wireless Specification (Frequency) Testing barcode scanner Up/down & sides Turning the device on and off Press power key on upper right of device to turn on. After few seconds, device will turn on. Press and hold power key for a while till you and tap power off on the screen options. Set up Press power key on upper right of device to turn on. After few seconds, device will turn on. Press and hold power key for a while till you and tap power off on the screen options. On- Off- Home screen items Opens apps window Status bar • Displays status/notifcation • Favorites shortcut • Browser bar Home screen   Tap and drag down to show notifcation • Tab and slide right/left to go other screens • Tap and drag down to show notifcation Tab and google search by text Tab and google search by voice Press and hold to set/move applications Execute Demos application on home screen. Tab ScanDemo to open. Press both scan keys at once or any of scan key on the device to scan barcode. Scanned barcode data will show on screen as on the picture left. 1. 2. 3. 4. Point the scanning beam at the center of barcode and keep scanning angle vertical to it. Scanning range varies according to bar code size so keep minimum distance for small barcode and further distance for bigger one. Connecting to PC Technical support & A/S User guides Certification Connecting USB data Sync cable Connect to PC and transfer data in Micro SD card/ device storage with I/O USB data Sync cable. Connecting connect USB cable to USB port of PC and I/O connector. Tab media device connection on notification panel of status bar. Select file transfer on pop up window. Disconnecting Tab to show notification panel and select media device connection. Select media device (MTP) and disable the connection. - - - - - Offline Tel: 02-3397-7870 Fax: 02-3397-7872 Address: B-9F Kabul Great Valley, 32, Digital-ro 9-gil, Geumcheon-gu, Seoul, Korea 08512 Online Website: http://www.pointmobile.co.kr/ E-mail: [email protected] User guides supports detailed information on safety & regulations of device and accessories. Due to the possibility of electric wave interference by device, no support on life safety. Equipment name: Mobile computer Model: PM80 Trade name of certified: POINT MOBILE CO.LTD Manufacturer/ Country of origin: POINT MOBILE CO.LTD/ China Production date: 2016.XX.XX Reboot Press and hold power key for 3 seconds and select Reboot on options to reboot the device. Settings -> back up and reset -> Factory reset -> Reset phone Factory reset Follow the process by tapping next button to complete factory reset. Back up all data - personal, application settings, account information and etc. before performing factory reset as it causes all data delete. Go to below route to set date and time. Settings -> Date and time -> Uncheck automatic date & time, Uncheck automatic time zone Access to above route and alter the following settings according to user’s decision. Set date Set time Select time zone Use 24-hour format Select date format • • • • • • Do not allow any strong pressure or impact on the touch screen. Do not touch any interior liquid from LCD panel breakage that may cause skin irritation. Use only approved AC/DC power adaptor provided with device or from distributor. Disapproved products may cause unexpected problems as fire, electric shock, etc. Disapproved modification or repair is not guaranteed. Inquire to distributor for any troubleshooting. Li-ion battery follows varied regulations in each region/ country. Accordingly, recycle or disuse li-ion battery properly. Do not leave or store it in fire or heat it or disassemble or short circuit it. Prevent plug and consent from dust and dirt to keep them clean. Improper storing or misuse may cause fire, electric shock, etc. HANDHELD TERMINAL Quick start guide PM80 • For more details of product information and user guide, please refer to our website (www.pointmobile.co.kr) WLAN 802.11b/g/n : 2412~2472MHz 802.11a/n: 5180~5240, 5260~5320, 5500~5620, 5745~5805MHz Bluetooth 1~3Mbps: 2402~2480MHz LE: 2402~2480MHz GSM GSM850 : 824~849MHz(TX), 869~894MHz(RX) GSM900 : 880~915MHz(TX), 925~960MHz(RX) WCDMA B1 : 1920~1980MHz(TX), 2110~2170MHz(RX) B2 : 1850~1910MHz(TX), 1930~1990MHz(RX) B4 : 1710~1755MHz(TX), 2110~2155MHz(RX) B5 : 824~849MHz(TX), 869~894MHz(RX) B8 : 880~915MHz(TX), 925~960MHz(RX) LTE B2 : 1850~1910MHz(TX), 1930~1990MHz(RX) B3 : 1715~1785MHz(TX), 1810~1880MHz(RX) B4 : 1710~1755MHz(TX), 2110~2155MHz(RX) B5 : 824~849MHz(TX), 869~894MHz(RX) B13 : 777~787MHz(TX), 746~756MHz(RX) B17 : 704~716MHz(TX), 734~746MHz(RX) • • • • • • • • • • • • • • • • • Allowed to use in all area. Please use the device at 1 cm or more distance away from your body. Item Model Operating System Software Micro-Processor Memory Memory extension Display Data capture options Keypad Audio I/O Weight Wif Bluetooth UMTS / HSPDA / HSUPA NFC/RFID Serial(RS232C) USB Battery Adaptor Charger Battery Operating temperature Rain/dust protection Specifcations PM80 Android 5.0 or higher(GMS/CTS certifed) Software Qualcomm 8916 1.4GHz Quad Core 1GB RAM X 8GB Flash(Upgradable) User accessible Micro SD memory card slot. 5.0” Wideviewing angle IPS(1280 X 720 pixels) 2D engine : SE4710 Touch screen & Front 4 hard keys Built-in microphone and speaker High speed USB 2.0 from cradle (or I/O cable) Below 270g 802.11 a/b/g/n(Up to 150Mbps) Bluetooth v4.x, class2 GSM: 850/900(MHz) WCDMA: BAND1, 2, 4, 5, 8 LTE USA: FDD2, 3, 5, 13, 17 13.5593MHz 9600bps,19.2kpbs,38.4kbps,57.6kbps,115.2kbps USB HS 2.0 OTG Support via I/O connector Li-ion battery 3.8V / 3000 mAh / 11.4 Wh Output: 5V / 2A, Input: 100-240V~50/60Hz 0.4A 5V input through DC port. Capacity: 3000mAh – Less than 4hrs. -20ºC ~ 60ºC IP67