Snapkis UltraFix 0-11 Operation & User’s Manual

Group II, III (15-36kg, approx. 3 to 11 years) Important: Before installing the car seat, remove the 5-point harness system and inner cushion. Vehicles without ISOFIX anchorage systems: Vehicles with ISOFIX anchorage systems: Click Step 1: Clip the two insert guides with the cut-out facing upwards onto the two ISOFIX attachment points of your vehicle. Tip: ISOFIX attachment points is between the seat and backrest. Step 2: Place the car seat forward facing on the vehicle seat. Press the ISOFIX unlock button and push both ISOFIX locking arms i ...

Forward facing - Third level Rear facing - Most recline Forward facing - Second level 10 9 8. How to adjust the shoulder belts Important: Make sure both shoulder belts are of the same height, not twisted, and fitted properly into the yoke connect plate. 9. How to adjust the reclining position of the car seat 10. How to adjust the height of the headrest If the height of the shoulder belt is not suitable for your child, adjust according to the following steps: Step 1: From the back of the car seat, remove both shoulder belts from the yoke connect plate. Step 2: Rele ...

Notice：This child restraint is suitable for the following cars: Vehicles without ISOFIX anchorages systems Yes Yes Vehicles with ISOFIX anchorages systems ! Contents WARNING This car seat can only be installed using a 3-point seat belt . Vehicle seat belt – shoulder belt Vehicle seat belt – lap belt 1. Understanding Your Vehicle..................................................................................2 2. Safety information...............................................................................................3 3. Checklist before use..... ...

Click Step 1: Adjust the reclining position of the car seat to level 3. Remove the buckle metal plate from the crotch belt hole. Step 2: From the front of the car seat, remove the shoulder pads and shoulder belts (please refer to section 8). Then the inner cushion and main cover can be removed easily. Notice: To re-fit the car seat cover, please follow the above method in the reverse order. 30°C Machine (gentle cycle)/ Hand wash, below 30˚C Do not bleach Do not tumble Do not iron Do not wring 17. Cleaning & Maintenance Periodically check the car se ...

Forward facing - Third level Rear facing - Most recline Forward facing - Second level 10 9 8. How to adjust the shoulder belts Important: Make sure both shoulder belts are of the same height, not twisted, and fitted properly into the yoke connect plate. 9. How to adjust the reclining position of the car seat 10. How to adjust the height of the headrest If the height of the shoulder belt is not suitable for your child, adjust according to the following steps: Step 1: From the back of the car seat, remove both shoulder belts from the yoke connect plate. Step 2: Rele ...

Forward facing - Third level Rear facing - Most recline Forward facing - Second level 10 9 8. How to adjust the shoulder belts Important: Make sure both shoulder belts are of the same height, not twisted, and fitted properly into the yoke connect plate. 9. How to adjust the reclining position of the car seat 10. How to adjust the height of the headrest If the height of the shoulder belt is not suitable for your child, adjust according to the following steps: Step 1: From the back of the car seat, remove both shoulder belts from the yoke connect plate. Step 2: Rele ...

Notice：This child restraint is suitable for the following cars: Vehicles without ISOFIX anchorages systems Yes Yes Vehicles with ISOFIX anchorages systems ! Contents WARNING This car seat can only be installed using a 3-point seat belt . Vehicle seat belt – shoulder belt Vehicle seat belt – lap belt 1. Understanding Your Vehicle..................................................................................2 2. Safety information...............................................................................................3 3. Checklist before use..... ...

(9-18kg, approx. 9mths to 4 years) Vehicles without ISOFIX anchorage systems: Click Step 4: Pass the top tether through the slot between the headrest and backrest. Fix the hook of the top tether on the vehicle seat’s top tether anchor according to the vehicle usage manual. Tighten the top tether until the indicator shows green. Step 1: Adjust the car seat to the suitable position (level 1, 2 or 3). Place the car seat forward facing on the vehicle seat. Make sure it is resting firmly against the vehicle seat backrest. Step 2: Pull ...