SmartPay D210E Operation & User’s Manual

1300 132 741 Option 2 - Merchant Services (Business Hours) Transaction & Banking Enquiries Order Stationery As your EFTPOS hardware provider Smartpay can be contacted for the following services on: 1800 4 EFTPOS (1800 433 876) • Sales • Technical Helpdesk (24hrs/7 Days) • Customer Service/Other Contact Us

technology to enhance their business. Smartpay offers a range of feature rich terminals and value added solutions. These solutions allow merchants to increase their revenue and attract more customers. We also supply a range of EFTPOS stands and accessories which you can order anytime by calling us on 1800 433 876. For terminal support we have a 24/7 Technical Helpdesk which you can call for help with faults or other assistance on 1800 433 876. Contents Terminal Setup - Getting Started General Usage Tips Battery Care Internet Connection Connecting using 3G (sim card) Connecting using Wi-Fi Basic Transactions - Purchase - Refunds Administrative Functions - Settlements Accessories 04 05 05 06 06 06 08 09 10 11 To view the full User Guide please visit our website www.smartpay.com.au

for 3 seconds. Check that is has full battery power by looking at the battery icon in the top right corner of the display screen. • If you need to charge your terminal, use the power cables supplied to plug into the side of the unit and into an appropriate mains power supply. If you have ordered a Base Station, place the terminal on it to charge. The Base Station must be connected to an appropriate power supply using the power cable supplied. The D210e terminal battery requires regular mains charging, much like a mobile phone. The battery charge can last up to 8 hours depending on frequency of use. • Lift printer cover flap to check the paper roll does not need to be replaced and is seated correctly in the printer well. • If you need to load a new paper roll ensure tongue of paper is feeding up from underneath the roll and close the lid firmly leaving tongue of paper sticking out above the cutting blade. i iii ii iv • Thermal Printer (lift flap to change paper roll) • Paper Cutter • Contactless NFC Reader • Printer Cover Lift Grip • LCD Display Screen • Card Swipe Reader • Power Charging Port • Menu Key • Cancel Key (Power On/Off) • Clear Key • Enter Key • Card Chip Reader 1 3 8 5 10 2 7 4 9 6 11 12 Getting Started 1 2 5 7 11 3 8 4 6 9 10 12 Battery located underneath Default Password: 123456

• Handle with care so you do not damage electric wires and power adapter. If electric wire, plugs or power adapter are damaged, please do not use the terminal and contact the technical helpdesk. • Do not leave the terminal for extended periods in direct sunlight, humid, hot, or dusty environments. • Keep the terminal and charging accessories away from liquids and do not charge if adaptor cable is dirty or wet. • Take care when inserting or removing charging cables. Do not use if the power cable is faulty as this may result in increased risk of power issues, overheating or terminal damage. • If the terminal is defective or any of the parts become overheated please turn off immediately and contact the technical helpdesk. • When installing paper roll, please be aware of the cutter within paper bucket. 1 3 5 2 4 6 • Charge indoors using a PAX charger, in a cool and well ventilated area. • Do not take apart the battery. • Do not short circuit the battery. • Keep the battery away from sources of heat, dust and liquid. • Do not squeeze, puncture or put the battery into liquid or near fire. • If failure happens such as heating , distortion or other damage. Please change to a new battery Contact the technical helpdesk for assistance. • Please dispose of old or damaged batteries safely. • It is recommended by manufacturer to change to a new battery after every 2 years. • To remove the battery, remove the screw from the back and pull out from the bottom edge. • When inserting the battery, do not try to force into place. Seat bottom of battery firmly into well and push down until it clicks into place. 1 3 5 2 4 6 7 8 9 10 Battery Care

If terminal is turned on successfully, the PAX logo will appear on screen and you will hear a beep. Allow the terminal to automatically run through its initialisation cycle before the EFTPOS "ready" screen appears. At this point the terminal is ready for use. 1 2 Connecting using 3G (Sim Card) • Power On - Press and hold power button for 3 seconds until LCD screen backlight comes on. If terminal is turned on successfully, the PAX logo will appear on screen and you will hear a beep. Allow the terminal to automatically run through its initialisation cycle.If the terminal had previously been setup to access your WiFi, it will reconnect automatically. 1 2 Connecting using Wi-Fi Internet Connection In order to process payments, your D210e EFTPOS terminal has to be connected to the internet. The D210e will be setup to use either cellular, Wi-Fi or the separate B210 base. If the D210e is setup for cellular then the will display the current signal strength. If the D210e is setup to use the intelligent base then the will light up. If the D210e is to use Wi-Fi then it will need to be setup to use your wireless modem/router, mobile phone (Wi-Fi personal hotspot) or a mobile Wi-Fi hotspot device. Wi-Fi signal strength is shown by the To setup Wi-Fi you will need to make sure your internet connection is activated, you have data, and (if using) your modem/router that it does not have any special configuration settings, network traffic restrictions or filters. Please be aware that if your network signal is not strong enough you may experience issues using the D210e. Also, Smartpay does not recommend using public or unsecured Wi-Fi networks to process payments.

9 10 11 12 If the terminal had not been previously connected to your WiFi or if you had changed your WiFi network since the last time the terminal logged on, the terminal will display: WiFi NETWORKING Manually Enter WiFi Details Select NO by pressing the F1 key. The terminal will display all the WiFi networks that it finds. Scroll down (F1 key) or scroll up (F2 key) to the network you want the terminal to connect to and press (key with the green circle). • Enter the WPA/WEP Password for your chosen WiFi Network (eg Password1234) To access upper or lower case letters, press the corresponding number key quickly to get the letter you want. To access the key number, press the number key once. If you want to repeat that number or enter a letter that corresponds with the same number, please pause before attemping to choose the character. (eg. key 3 will give you 3 D E F d e f in that order). As soon as you have entered the correct WiFi password, press (key with the green circle). The terminal will display the following messages: Searching for network Connecting to network The terminal will connect to the WiFi and will display the WiFi network name provided there is a strong signal. The terminal will then present the EFTPOS "ready" screen. At this point the terminal is ready for use. You can update Wi-Fi settings at any time. 13 3 5 4 6 7 8

Terminal screen will show transaction amount and prompt customer to present their card. If blue indicator flashes then the contactless option is ready and available. Customer presents card (for contactless / inserts, for chip / swipes, for magnetic strip). If contactless and amount is under threshold then transaction will process automatically. If card was inserted or swiped the customer then selects account using the appropriate function keys (Keys with the blue lines). Terminal screen will show account type and transaction amount and prompt customer to enter their PIN. Press CLEAR key to change or ENTER key to continue. Terminal will process the transaction, display Approved or Declined result and print a merchant receipt. User can select YES or NO to print customer copy of receipt as required. 1 3 5 2 4 6 7 Basic Transactions To get back to the EFTPOS ready screen, press CANCEL at any time

Press 4 to select REFUND Enter the refund amount. Press CLEAR key to change or ENTER key to continue. Merchant will need to enter Refund Password. Press ENTER Offer terminal for customer to present their card. If card was inserted or swiped then customer selects account using function keys (Up/Down and Menu keys). Customer to enter their PIN. Press ENTER Terminal displays transaction result APPROVED or DECLINED. Terminal automatically prints MERCHANT RECEIPT with REFUND clearly highlighted at top of receipt. 1 3 5 2 4 6 7 Basic Transactions To get back to the EFTPOS ready screen, press CANCEL at any time

terminal will connect to the network and process a settlement automatically. A detailed receipt is printed for the merchant record. A failed settlement will print a failed settlement receipt. After each batch settlement, all following transactions belong to the next business day and will be settled with the next batch. If the terminal is not settled by the required time, a forced settlement will be generated. The settlement receipt will print automatically the next time the terminal is connected tothe network. Forced settlements do not include stored transactions. These will be included in the next full settlement. From the idle screen press MENU Press 2 to access the Totals menu. Select 1 - Settlement. Enter Settlement password. Terminal will display Batch Totals and prompt user to Settle Now. Select YES Terminal will prompt to Print Entire Trans List Now. Select YES MANUAL SETTLEMENT Press CANCEL to go back Administrative Functions 1 3 5 2 4 6

Hanging Cradle Charging/Comms Base (B210) To order accessories call Smartpay on 1800 433 876 Accessories Available