SMART-AVI XT-800 Operation & User’s Manual

Notice The information contained in this document is subject to change without notice. Smart-AVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for any particular purpose. Smart-AVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. No part of this document may be photocopied, reproduced or translated into another language with out prior written consent from Smart-AVI. For the complete manual, visit www.smartavi.com. Use CAT5 cable to broadcast high resolution SXGA, Stereo Audio, RS232 and IR to 8 stations up to 1000ft away. XT-800 www.smartavi.com User Manual 2840 N. Naomi Ave. Burbank, California 91504 Phone: (818) 565-0011 Facsimile: (818) 565-0020 Technical Specifications ����������������������������� ����������������������������� XT-800 SPECIFICATIONS XT-800 SPECIFICATIONS XT-800 SPECIFICATIONS XT-800 SPECIFICATIONS T-800 SPECIFICATIONS X VGA Data VGA Data VGA Data VGA Data GA Data V Format GBHV, RGsB, YUV, Y/C, CVBS R Res lo u it on Up to 1900 x 1200 GA, SVGA, XGA, SXGA) V Connector yt pe D 15 socket H Audio Audio Audio Audio udio A iS gn la Type nced tereo unb ala S Connector 5mm aj ck socket .3 Power Power Power Power ower P Requ ri emen st VDC @.5A 5 Connector 1mm DC aj ck c( enter +ve) .2 al cis Phy al cis Phy al cis Phy al cis Phy al cis hy P Dimen is ons .2 7cm ( .3 1w ti h peg )s 2 x 1 .1 8 x 2 W ie ght 5 lbs .3 Sending an RS232 command to remote Sending an RS232 command to remote Sending an RS232 command to remote Sending an RS232 command to remote Sending an RS232 command to remote monitor monitor monitor monitor monitor In order to send a command to a remote monitor, you will need to use The following query at 9600 baud rate; //M1 � After sending this query, any command sent from the PC will go directly to monitor 1 � To send a command to monitor 2 replace "M1" with "M2" etc... � To send the same command to all monitors ( but only monitor 1 will answer) Use the following command; //M0 * = Carriage return In Out In Out RS232 Out 1-8 IR

a wide range of video and audio formats, RS232, and IR up to 8 locations using Category 5 Unshielded Twisted Pair (UTP) cables. With RS232 communication support, the XT800 allows users to send commands to single or multiple devices. This allows the user to change volume, channel or turn on/off the remote LCD TV. Features � Supports Dual Screens. � Uses easy to install, inexpensive CAT-5/5e/6/7/8. � Output reaches up to 1,000 feet (300 m). � Resolutions up to 1900x1200. � HDTV Compatible (720p, 1080i, 1080p) � 300 MHz Bandwidth. � Sends high-resolution UXGA, Stereo Audio signals, RS232 or IR from one source to 8 locations. � Compatible with VGA, XGA, Sun, MAC and SGI � Sync Format / Polarity Preservation. � Compatible with Line Level Stereo Audio Signals. � High ground loop immunity. � Built-in power surge and transient protection. � Designated trimmer in the remote unit to compensate for cable length. � Compact Metal Case Enclosure. � External power supply. � RS-232c communication support to single or mul tiple displays. � IR command to single or multiple displays. What’s in the box? XT800 XT800 XT800 XT800 XT800 Please check package contents before installing. Installation Diagram XT800 Transmitter Installation Diagram XT800 Receiver Installation Diagram Adjusting and Tuning the Signal Adjusting and Tuning the Signal Adjusting and Tuning the Signal Adjusting and Tuning the Signal Adjusting and Tuning the Signal In order to fine tune the signal, adjust the individual dials one at a time starting with GREEN, then BLUE, and lastly RED. As you turn the dials you will notice the colors slightly change as you increase or decrease the strength. All dials should be around the same distance. Preparing & Connecting System CAT5 Cable Preparing & Connecting System CAT5 Cable Preparing & Connecting System CAT5 Cable Preparing & Connecting System CAT5 Cable Preparing & Connecting System CAT5 Cable Following is the wiring standard for terminating CAT 5 cable using RJ-45 connector: Pair 1 Pins 1 & 2 Pair 2 Pins 3 & 6 Pair 3 Pins 4 & 5 Pair 4 Pins 7 & 8 Connectors: Connectors: Connectors: Connectors: Connectors: RJ-45 Capacitance: Capacitance: Capacitance: Capacitance: Capacitance: 14 pf/ft (46.2 pf/m) Conductor Gauge: Conductor Gauge: Conductor Gauge: Conductor Gauge: Conductor Gauge: 24 AWG Impedance: Impedance: Impedance: Impedance: Impedance: 100 +/- 15 ohms 4 - Pair Connecting The Transmitter Connecting The Transmitter Connecting The Transmitter Connecting The Transmitter Connecting The Transmitter 1. Connect the output of the computer video card to the video input of the transmitter using the included male to male video cable. 2. Connect the output of the computer audio card to the audio input of the transmitter using 3.5mm audio male to male audio cable. 3. Connect local monitor to the VGA out of the transmitter. 4. Connect external speakers to the transmitter’s audio out (Standard 3.5mm stereo miniplug). 5. In the back of the unit connect the CAT5 cable that will connect to the receiver (XT800-RX). *NOTE: You can not use RS232 and IR at the same time. Connecting The Receiver Connecting The Receiver Connecting The Receiver Connecting The Receiver Connecting The Receiver 1. Connect CAT5 cable (coming from the transmitter) to the back of the receiver. 2. Connect 1-4 display monitors to the VGA out connectors on the front of the receiver. 3. Connect 1-4 sets of external speakers to the audio output connections on the front of the unit. (Standard 3.5mm stereo Miniplug) XT800 Package Content XT800 Package Content XT800 Package Content XT800 Package Content T800 Package Content X ty Q y t Q y t Q y t Q y Qt tI ems tI ems tI ems tI ems tI ems Pa tr No. Pa tr No. Pa tr No. Pa tr No. a tr No. P 1 XT800 Transm tti er un ti T80 T-0 X X 1 dc power sup ylp tlo 5 v -S 5D1A-US P 1 (6 )tf elb VGA ca ela to m ela HDD 15 m C-VGAMM-06 C Op it onal Op it onal Op it onal Op it onal p it onal O 1 vie er Un ti XTPRO Rec TPRO-RX X 1 elb .3 5 mm ts ereo mini lp ug ca Audio C-MMAMM-06 C 1 vie er IR EYE Rec M-EYE S 1 IR Em tti er M L- ED S 1 elb '6 RS232 ca CRS23 -2 06 C XT400 VGAOut 8lines of CAT5 XTPRO RX XTPRO RX XTPRO RX XTPRO RX XTPRO RX XTPRO RX XTPRO RX XTPRO RX XT800