Fossil ANALOG VD86A RETROGRADE WITH DATE SWEEP Instruction Manual

Chronograph Stopwatch VD54 (with date - VD53) Time and Date Setting 1. Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. 2. Pull crown out to position 2. 3. Turn crown clockwise until the previous day’s date is displayed. 4. Pull crown out to position 3 when the second hand is at the 12:00 position. 5. Turn crown to set time. Note: 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be sure to check that the 24-hour hand is set properly. 6. Return crown to position 1. Note: When the crown is in po ...

Chronograph Stopwatch VD54 (with date - VD53) Time and Date Setting 1. Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. 2. Pull crown out to position 2. 3. Turn crown clockwise until the previous day’s date is displayed. 4. Pull crown out to position 3 when the second hand is at the 12:00 position. 5. Turn crown to set time. Note: 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be sure to check that the 24-hour hand is set properly. 6. Return crown to position 1. Note: When the crown is in po ...

Digital MLL-004 Normal Time Display 1. Press A to display month/date for 3 seconds. 2. Press A twice (or once if date is displayed) to display seconds. Press A again to return to Normal Time Display. Time and Date Setting 1. From Normal Time Display, press B twice to enter setting mode; month will be displayed. 2. Press A to increase value. 3. Press B to set and advance to next setting. 4. Setting sequence is: month, date, hour, minute. 5. Press B to exit setting mode; press A to activate watch. NOTE: Colon will flash between hour and minutes in Normal Time Display to indicate w ...

LED QFL558FA Hour/Minute Display 1. Press A to toggle display on/off. NOTE: Hour/Minute Display is the default display when turning the display on. 2. Press B to toggle hour/minute display and seconds display. Seconds Display Press A or B to return to hour/minute display. Time Setting 1. In Hour/Minute Display, press and hold B to enter setting mode; hour will flash once. 2. Press A to increase digits. 3. Press B to advance to minutes. 4. Press A to increase digits. 5. Press and hold B to exit setting mode. Hour and minutes will flash once. NOTE: In setting mode, if no pusher/bu ...

LED QFL558FA Hour/Minute Display 1. Press A to toggle display on/off. NOTE: Hour/Minute Display is the default display when turning the display on. 2. Press B to toggle hour/minute display and seconds display. Seconds Display Press A or B to return to hour/minute display. Time Setting 1. In Hour/Minute Display, press and hold B to enter setting mode; hour will flash once. 2. Press A to increase digits. 3. Press B to advance to minutes. 4. Press A to increase digits. 5. Press and hold B to exit setting mode. Hour and minutes will flash once. NOTE: In setting mode, if no pusher/bu ...

Ten Half Digit Digital FL145 / FL186 Normal Time Display 1. Press A to change mode. 2. Press B for EL. 3. Press C to toggle 12/24 hour format. 4. Press D to stop alarm sound. Time/Calendar Setting 1. From normal time display, press A three times to enter setting mode. Seconds will begin flashing. 2. Press C to reset seconds to zero. 3. Press D to set and advance to next setting value. 4. Press C to increase digit; press and hold C for fast advance. Press D to set each setting value. 5. Setting sequence is: seconds, hour, minutes, month, date, day of week. 6. Press A to exit s ...