DSC Envoy NT9010 Installation Manual

limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. NT9010 v 1.0 Installation Guide DLS-3 v1.3 and higher

period of twelve months from the date of purchase, the product shall be free of defects in materials and workmanship under normal use. During the warranty period, Digital Security Controls Ltd. shall, at its option, repair or replace any defective product upon return of the product to its factory, at no charge for labour and materials. Any replacement and/or repaired parts are warranted for the remainder of the original warranty or ninety (90) days, whichever is longer. The original purchaser must promptly notify Digital Security Controls Ltd. in writing that there is defect in material or workmanship, such written notice to be received in all events prior to expi- ration of the warranty period. There is absolutely no warranty on software and all software products are sold as a user license under the terms of the software license agreement included with the product. The Customer assumes all responsibility for the proper selection, installation, operation and maintenance of any products purchased from DSC. Custom products are only warranted to the extent that they do not function upon delivery. In such cases, DSC can replace or credit at its option. International Warranty The warranty for international customers is the same as for any customer within Canada and the United States, with the exception that Digital Secu- rity Controls Ltd. shall not be responsible for any customs fees, taxes, or VAT that may be due. Warranty Procedure To obtain service under this warranty, please return the item(s) in question to the point of purchase. All authorized distributors and dealers have a warranty program. Anyone returning goods to Digital Security Controls Ltd. must first obtain an authorization number. Digital Security Controls Ltd. will not accept any shipment whatsoever for which prior authorization has not been obtained. Conditions to Void Warranty This warranty applies only to defects in parts and workmanship relating to normal use. It does not cover: • damage incurred in shipping or handling; • damage caused by disaster such as fire, flood, wind, earthquake or lightning; • damage due to causes beyond the control of Digital Security Controls Ltd. such as excessive voltage, mechanical shock or water damage; • damage caused by unauthorized attachment, alterations, modifications or foreign objects; • damage caused by peripherals (unless such peripherals were supplied by Digital Security Controls Ltd.); • defects caused by failure to provide a suitable installation environment for the products; • damage caused by use of the products for purposes other than those for which it was designed; • damage from improper maintenance; • damage arising out of any other abuse, mishandling or improper appli- cation of the products. Items Not Covered by Warranty In addition to the items which void the Warranty, the following items shall not be covered by Warranty: (i) freight cost to the repair centre; (ii) prod- ucts which are not identified with DSC's product label and lot number or serial number; (iii) products disassembled or repaired in such a manner as to adversely affect performance or prevent adequate inspection or testing to verify any warranty claim. Access cards or tags returned for replace- ment under warranty will be credited or replaced at DSC's option. Products not covered by this warranty, or otherwise out of warranty due to age, mis- use, or damage shall be evaluated, and a repair estimate shall be provided. No repair work will be performed until a valid purchase order is received from the Customer and a Return Merchandise Authorisation number (RMA) is issued by DSC's Customer Service. Digital Security Controls Ltd.’s liability for failure to repair the product under this warranty after a reasonable number of attempts will be limited to a replacement of the product, as the exclusive remedy for breach of war- ranty. Under no circumstances shall Digital Security Controls Ltd. be lia- ble for any special, incidental, or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability, or any other legal theory. Such damages include, but are not limited to, loss of profits, loss of the product or any associated equipment, cost of capital, cost of substitute or replacement equipment, facilities or services, down time, purchaser’s time, the claims of third parties, including customers, and injury to property. The laws of some jurisdictions limit or do not allow the disclaimer of consequential damages. If the laws of such a jurisdiction apply to any claim by or against DSC, the limitations and disclaimers con- tained here shall be to the greatest extent permitted by law. Some states do not allow the exclusion or limitation of incidental or consequential dam- ages, so that the above may not apply to you. Disclaimer of Warranties This warranty contains the entire warranty and shall be in lieu of any and all other warranties, whether expressed or implied (including all implied warranties of merchantability or fitness for a particular purpose) and of all other obligations or liabilities on the part of Digital Security Controls Ltd. Digital Security Controls Ltd. neither assumes responsibility for nor authorizes any other person purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or liability concerning this product. This disclaimer of warranties and limited warranty are governed by the laws of the province of Ontario, Canada. WARNING: Digital Security Controls Ltd. recommends that the entire system be completely tested on a regular basis. However, despite frequent testing, and due to, but not limited to, criminal tam- pering or electrical disruption, it is possible for this product to fail to perform as expected. Out of Warranty Repairs Digital Security Controls Ltd. will at its option repair or replace out-of- warranty products which are returned to its factory according to the fol- lowing conditions. Anyone returning goods to Digital Security Controls Ltd. must first obtain an authorization number. Digital Security Controls Ltd. will not accept any shipment whatsoever for which prior authorization has not been obtained. Products which Digital Security Controls Ltd. determines to be repairable will be repaired and returned. A set fee which Digital Security Controls Ltd. has predetermined and which may be revised from time to time, will be charged for each unit repaired. Products which Digital Security Controls Ltd. determines not to be repair- able will be replaced by the nearest equivalent product available at that time. The current market price of the replacement product will be charged for each replacement unit.

Chapter 1: Quick Set Up Section 1.1: Introduction 1.1.1 About the NT9010 System ................................. 1 1.1.2 About the NT9010 Manual Set .......................... 1 1.1.3 Main system Specifications ................................. 2 1.1.4 Additional Devices ............................................. 3 1.1.5 Peel-off Instruction Labels .................................. 4 Section 1.2: Installing The NT9010 1.2.1 Out of the Box ................................................... 5 1.2.2 Create an Installation Plan .................................. 5 1.2.3 Prepare the Mounting Location .......................... 5 1.2.4 Installing the NT9010 ........................................ 5 1.2.5 Connecting the Battery ...................................... 6 1.2.6 Mounting the Wireless Devices ......................... 10 1.2.7 Enrolling Devices and Setting Up the System .... 10 1.2.8 Other NT9010 Options ..................................... 13 1.2.9 Deleting Wireless Devices ................................. 13 Section 1.3: Troubleshooting 1.3.1 Typical Installation Problems and Solutions ....... 14 Chapter 2: Advanced Programming Section 2.1: Programming the NT9010 2.1.1 How to Enter Advanced Programming ............. 15 2.1.2 Programming Decimal Data .............................. 15 2.1.3 Programming Hexadecimal Data ...................... 16 2.1.4 Programming Toggle Options ........................... 16 2.1.5 Programming Audio Labels .............................. 16 2.1.6 Reviewing Programming .................................. 17 2.1.7 Exiting Programming ........................................ 17 Section 2.2: Changing How the NT9010 Works For Users 2.2.1 Accessing the NT9010 System Using a Telephone ........................................... 18 2.2.2 Access Codes ................................................... 19 2.2.3 Voice Prompt Interface ..................................... 21 2.2.4 Alarm Announce-ments ................................... 22 2.2.5 Arming and Disarming Options ........................ 22 2.2.6 Automatic Arming ........................................... 23 2.2.7 Entry and Exit Delay Options ............................ 24 2.2.8 Bell Options ..................................................... 25 2.2.9 User Commands .............................................. 25 2.2.10 Function Keys .................................................. 29 2.2.11 Programming Wireless Keys ............................. 31 2.2.12 Fire, Auxiliary or Medical, and Panic Keys ......... 32 2.2.13 Keypad Options ............................................... 33 2.2.14 Sleep Mode ..................................................... 33 Section 2.3: Changing Other NT9010 Functions 2.3.1 Zone Definitions .............................................. 34 2.3.2 Zone Attributes ................................................ 36 2.3.3 Enrolling Hardwired Zones ............................... 37 2.3.4 Wireless Device Serial Numbers ........................ 37 2.3.5 Wireless Zone Supervision ................................ 38 2.3.6 RF Jamming Detection Zone* ........................... 38 2.3.7 Zone Tamper/Fault Options .............................. 39 2.3.8 Communicator Dialing ..................................... 39 2.3.9 Communicator Telephone Numbers ................. 40 2.3.10 Communicator Account Codes ........................ 40 2.3.11 Communicator Reporting Formats ................... 41 2.3.12 Communicator Reporting Codes ...................... 44 2.3.13 Talk/Listen-in Programming .............................. 46 2.3.14 Downloading ................................................... 47 2.3.15 Telephone Line Monitoring (TLM) .................... 49 2.3.16 Test Transmissions ........................................... 49 2.3.17 Event Buffer ..................................................... 50 2.3.18 Swinger Shutdown ......................................... 50 2.3.19 Timebase ......................................................... 50 2.3.20 Factory Default ................................................ 50 2.3.21 Installer Lockout .............................................. 52 2.3.22 Walk Test ........................................................ 52 Appendix A: Guidelines for Locating Smoke Detectors 53 Appendix B: Reporting Codes 54 Appendix C: UL Listed Grade A Control Unit Requirements 56 Appendix D: WLS925L-433 Mini Door/ Window Contact Installation Instructions 57 Appendix E: WLS904P Wireless Motion Detector Installation Instructions 58

Section 1.1: Introduction 1.1.1 About the NT9010 System The NT9010 is a full-featured, wireless security system. It has been designed for fast and easy installation, in household fire, burglary and home health care applications. The NT9010 system is made up of the following components: • A main control unit • Up to 32 wireless detectors and panic pendants (total) • You can also add up to 16 wireless keys. The NT9010 system supports up to 32 zones (detectors and panic pendants), and 32 sys- tem users. The NT9010 main control unit guides users through their available options with easy-to-understand audio prompts. The status of the NT9010 system can be monitored over a telephone line. You can program the system using the keypad on the NT9010 control unit, or using DLS-3* downloading software and a computer. If you program the system from the NT9010 con- trol unit, you can do the basic zone enrollment and programming using Flash Program- ming. See Chapter 1: Quick Set Up in the Installation Guide for more information on using Flash Programming. 1.1.2 About the NT9010 Manual Set The NT9010 system has three manuals, Installation Guide, Programming Worksheets, and User’s Guide. ☛ Installation Guide NOTE: All sections of this guide are applicable to the NT9010 and NT9010A. The Installation Guide contains two main chapters. Chapter 1: Quick Set Up This chapter is for people who will be installing NT9010 systems requiring only basic pro- gramming. This will be the case in the majority of installations. Please review this chapter before beginning your installation. The Quick Set Up covers the following topics: • An overview of the system • How to mount and complete NT9010 wiring • How to enroll devices and program the system using Flash Programming • Basic troubleshooting tips • Guidelines for placing smoke detectors Chapter 2: Advanced Programming This chapter is for people who will be installing a system that needs special features or cus- tom programming. If your installation requires more programming than is included in Flash Programming, review the relevant sections of this chapter for more information. *Not verified by UL.