DVTEL Horizon 7.0 Quick Configuration Manual

Quick Configuration Guide 3 Wizard Welcome Screen Figure 1: Wizard Welcome screen On the Welcome screen, click Next. ...

Quick Configuration Guide 9 Complete Setup Wizard After completing all the Wizard steps, Wizard displays the Setup Complete screen. Setup Complete At this point, the user still has the option to return to any of the previous screens if any changes are required by using the Back button. This screen also displays instructions for downloading the client software, if required. Once all of the settings have been selected, click Finish. Figure 8: Setup Complete screen The Setup Wizard will apply all the chosen parameters. This process can take 2-3 minutes to complete. Figure 9: Lau ...

10 © 2015 DVTEL 8 Recording Mode Setup The chosen Recording Mode will determine how the connected cameras are set to record when the Wizard is complete. Figure 7: Recording Mode screen Note: These settings can be changed at any time for each individual camera through the Horizon Admin Center Always Recording Cameras will record 24/7, using the video settings assigned to the camera, either by default or as modified individually by the user. Motion Detection Cameras will only record when they detect motion. The default motion recording settings are 30 seconds pre- and post- ...

not be copied, reproduced or used in any way without the express written permission of DVTEL Inc Information in this document is subject to change without notice. This document also contains registered trademarks and service marks that are owned by their respective companies or organizations. While reasonable effort was made to ensure that the information in this document was complete and accurate at the time of printing, DVTEL Inc cannot assure the accuracy of such information. Changes and/or co ...

2 © 2015 DVTEL 2 Initial Setup Wizard The first time the Horizon NVR is powered up, the user must enter the default user name and password at the Windows login screen. User name: administrator Password: dvtel Once the password has been entered, the system automatically runs the Initial Setup Wizard. The user completes all the Wizard steps, after which the system opens the Horizon Admin Center and the system setup can be continued. Note: All steps in the Initial Setup Wizard are mandatory. The Horizon Admin Center will launch only after all steps have been completed. ...

2 © 2015 DVTEL 2 Initial Setup Wizard The first time the Horizon NVR is powered up, the user must enter the default user name and password at the Windows login screen. User name: administrator Password: dvtel Once the password has been entered, the system automatically runs the Initial Setup Wizard. The user completes all the Wizard steps, after which the system opens the Horizon Admin Center and the system setup can be continued. Note: All steps in the Initial Setup Wizard are mandatory. The Horizon Admin Center will launch only after all steps have been completed. ...

Quick Configuration Guide 7 Video Standards Setup Figure 6: Video Standard Setup Select the video standard used in your region: NTSC or PAL. When finished, click Next. ...