Everlast PD1 Operation & User’s Manual

INTRODUCTION This digital pedometer displays steps taken, distance traveled, calories burned, total exercise time, and 7 days memory storage,among many other useful features. Please read this manual carefully before using this pedometer. We suggest you keep this manual for future reference. To keep your health and reduce chronic disease risk, we recommend you to take 10,000 steps a day.For an effective weight loss,the total steps should be between 12,000 and 15,000. If you want to achieve a higher fitness level, you are suggested to take at least 30,000 steps per day.

2 3 4 5 6-7 8 TIME MODE 8-9 PEDOMETER MODE DATA RECALL MODE STOPWATCH MODE COUNTDOWN TIMER MODE ALARM MODE 10 11 12 12 13 14 15 BATTERY REPLACEMENT REMARK: INTRODUCTION CONTENTS SETTING YOUR PEDOMETER BASIC OPERATION OF BUTTONS OPERATING MODES CALCULATING STRIDE LENGTH CARE AND MAINTENANCE & CLEARING Press and hold the LIGHT key and RESET key at the same time to turn on the pedometer when in power saving mode. CONTENTS

1. MODE BUTTON 2. ADJ/EL BUTTON BASIC OPERATION OF BUTTONS BUTTONS CONFIGURATION: Scrolls through various modes of the watch Advances to next variable in setting sequence 3. ST/STP BUTTON Increases variable in setting sequence Pauses time in stopwatch and countdown timer modes 4. RESET BUTTON Decreases variable in setting sequence Toggles key tone Activates light Enters the setting sequence for each setting mode S1=MODE S2=ADJUST/EL S3=START/STOP S4=RESET PEDOMETER S1 S2 S3 S4

Time mode Pedometer mode -Display the number of steps taken, exercise time, calories burned, distance, speed, target icons Data recall mode OPERATING MODES -Display date, week, hour, minute, second Stopwatch mode Alarm mode - 1/100 chronograph This pedometer has 6 operational modes and are in following sequence Press MODE key to scroll through modes: -Display the daily and total data of steps taken, calories burned, distance traveled, exercise time for past 7 days -Optional function for two alarms to go off at the user’s expected time Countdown timer Mode 100 hours total countdown range

SETTING YOUR PEDOMETER Time mode Pedometer mode Data recall mode Stopwatch mode Alarm mode Countdown Timer Mode S1 S1 S1 S1

ENGLISH l 7 -Press Mode key to go into pedometer mode -Press and hold the ADJ/EL key for 2 seconds to set the info in the following order: Age/Measurement Unit/Weight/Walking Stride/Running Stride/Target Step -Press ST/STP key to increase the setting value, while press RESET key to decrease; Pressing and holding the button will change the value rapidly. -When the value is correct, press MODE to move to next. Continue to press MODE and change values as required until the pedometer returns to the age item. Press ADJ/EL key to confirm the setting and go back to pedometer mode. -There are 10 icons which show the progress of your step to the target steps at the top of LCD screen. Note: The pedometer will automatically go back to the time mode if there is no input for 20 seconds in the SETUP mode.

CALCULATING STRIDE LENGTH How to calculate your stride length: TIME MODE Display instruction: First Row: display the day of week, day (or month, day) Second Row: display hour, minute, second To properly calculate your stride length, measure a predetermined distance in feet. Correct stride distance is defined as a tip of your foot to another one. To measure the correct average stride distance, divide the total distance of ten steps you walked / run by the number of step (10). Calculate the stride distance in the following way: You walk 6.2 meters, 6.2m (total distance) / 10 (number of steps) = 0.62m (62cm). NOTE : Unlike the conventional pedometer, this pedometer using a 3D motion sensor that can detect fine body step movement without mechanical sensor, so no rattle sound will create.

OPERATING THE PEDOMETER 3. Press ST/STP key to switch display: day of the week/ month 4. Press RESET key to toggle the key tone. It will display the sign “ ” when the key tone is turned on. 5. Press RESET key for 2 seconds to switch between time 1 and time 2. There will be a signal "T2" when the time 2 is selected. Operation instruction: 1. Press MODE key to switch to the next mode 2. Time setting: Holding ADJ/EL key in time mode, it will enter time setting mode after 2 seconds’ flashing of “ADJ; Press MODE key to switch the setting items in the following order: hour, minute, second, year, month, day, 12/24 hour; At one setting items, pressing ST/STP or RESET key to increase/decrease the value, pressing and holding ST/STP or RESET key to increase/ decrease the value rapidly.(Note: when the second value is below 30, it will come to zero by pressing ST/STP or RESET key . When the second value is above or equal to 30, it will add 1 on the minute digit by pressing ST/STP or RESET key) ; then press ADJ/EL key to confirm setting and go back to time display mode.

OPERATING THE PEDOMETER PEDOMETER MODE Display instruction: First Row: display exercise time Second Row: display steps, calorie, distance, speed, target goal % The progress of target goal is showed on the top Operation instruction: 1. Press MODE key to switch to next mode 2. Personal Info Setting: Hold ADJ/EL key in the pedometer mode, after “ADJ” flashing for2 seconds enters setting mode; Press MODE key to set the info in following order: age, unit, weight, walking stride, running stride, hundred thousand digit of target goal, ten thousands digit of target goal, thousand digit of target goal, hundred digit of target goal; At one setting item, press ST/STP or RESET key to increase/ decrease the value; press and hold ST/STP or RESET key to increase/decrease the value rapidly. Press ADJ/EL key to confirm the setting and back to pedometer mode.

OPERATING THE PEDOMETER DATA RECALL MODE Operation instruction: 1. Press MODE key to switch to next mode. 2. Press ST/STP key to switch to the record date 3. Press RESET key to view the info as below order: steps, calorie, distance, speed, exercise time, target goal % Display instruction: First Row: display the date of the record Second Row: display the steps, calorie, distance, speed, exercise time, target goal%, progress of target goal( if there is no data, ‘DATA--’ will be displayed.) 3. Press ST/STP key to switch from Step, Calorie, Distance, Speed, Target Goal % 4. Hold ST/STP key for 2 seconds to turn on/off pedometer function. When the pedometer is on, the sign “ ” will be flashing. 5. Hold RESET key for 2 seconds to switch from Walking Mode to Running Mode.

OPERATING THE PEDOMETER STOPWATCH MODE COUNTDOWN TIMER MODE Press ST/STP key to start or stop the stopwatch. The stopwatch can still running even you turn to other modes. Press RESET key to reset the stopwatch when counting stops. Press ST/STP key to start or stop counting down. Press RESET key to reset the timer. Press and hold ADJ/EL key for 2 seconds to set the timer. Press ST/STP key to increase the value, while press RESET key to decrease the value. Pressing and holding the button will change the value rapidly. Press MODE key to switch from hour digit to minute digit, and press the ADJ/EL key to confirm.

OPERATING THE PEDOMETER ALARM MODE To save power, press the MODE and ST/STP keys at the same time to turn off the watch, and press the ADJ/EL and RESET keys to turn it on. Note: The pedometer will automatically go back to Countdown Timer Mode if there is no input for 20 minutes in the setup mode. Press ST/STP key to transfer alarm 1 to alarm 2. Press RESET key to turn on/off the alarms. Press and hold ADJ/EL key key for 2 seconds to enter setting. Press ST/STP key to increase the value, while press RESET key to decrease the value. Press MODE key to switch from hour digit to minute digit, and press the ADJ/EL key key to confirm. Note: The pedometer will automatically back to Alarm Mode if there is no input for 20 minutes in the setup mode.

BATTERY REPLACEMENT BATTERY REPLACEMENT WE STRONGLY RECOMMEND TAKING YOUR PEDOMETER TO A LOCAL JEWELER STORE TO HAVE BATTERY REPLACED TO AVOID POSSIBILITY OF PERMANENTLY DAMAGE OF THE PEDOMETER. -Remove the exhausted battery from the unit, and inset a new one. Make sure the battery positive (+) side point to the battery compartment cover. -Replace the cover on the battery compartment

CARE AND MAINTENANCE & CLEARING CARE AND MAINTENANCE -Never attempt to disassemble or service your unit, it will void the warranty. -Do not subject the device to extreme shocks(do not drop on the floor) -Do not expose the device to strong chemicals such as gasoline, clean solvents, acetone, alcohol, or insect repellents, as they may damage the device's seal, case and finish. -Store the product in a dry place when you are not using it. -Leaky batteries can damage the device. Remove the battery when the device will not be used for a long time. -To avoid accidental strangulation, keep the pedometer out of reach of young children -The operation environment of the pedometer must be free from shocks, magnetic fields, electrical noise and strong vibration. -Do not immerse the product in water as this will result in damage to it. -It could be cleaned with a lightly moistened cloth. Apply mild soap to the area if there are stubborn stains or marks.

EVERLAST™, the Econ device™, and GREATNESS IS WITHIN™ are trade marks of Everlast World’s Boxing Headquarters Corporation and used under license by Xtreme Time Inc. 20 West 33rd Street 6th Floor New York, N.Y. 10001