Extron electronics USP 507 Setup Manual
Text of the manual
USP 507 • Setup Guide
The Extron USP 507 (Universal Signal Processor) is a scaling product that allows most common signal formats to be processed and
output in any desired format.
This setup guide allows an experienced user to easily and quickly set up and configure a USP 507 using step by step instructions.
It covers performing basic op
USP 507 • Setup Guide (Continued)
2
Aux SW Follow port — For auxiliary device switching; using a NULL RS-232 cable only, connect an Extron audio switcher/processor,
such as the SW 8A, to the lower 9-pin D-sub RS-232 connector n. When the USP 507 switches input via either a control device
RS-232 command, or front panel control, the USP 507 and the connect
Enabling or disabling Executive mode 1 from the front panel
If the USP 507 is in Executive mode 0 (unlocked), the procedure shown at right selects mode 1
(locked). If it is in Executive mode 1, this procedure selects mode 0 (unlocked).
When Executive mode 1 is enabled and a front panel action is attempted (other than video
freeze, input switching, PIP pres
+1.800.633.9876 (Inside USA/Canada Only)
Extron Asia
+65.6383.4400
Extron China
+86.21.3760.1568)
Extron Korea
+82.2.3444.1571
Extron Europe
+31.33.453.4040
Extron Japan
+81.3.3511.7655
Extron Middle East
+971.4.2991800
Extron India
+91.80.3055.3777
© 2012 Extron Electronics — All rights reserved. All trademarks mentioned are the prop
