FireMagic 3589-DR Installation, Operation And Maintenance Instructions

FireMagicStore.com | 877-474-5578

Unpacking your appliance ..................................................3 Installing your appliance ......................................................4 Cabinet clearances .........................................................4 Leveling the appliance ....................................................4 Electrical connection ......................................................5 Installing the anti-tip device .................................................6 Product Dimensions ...........................................................8 Using your Electronic control .............................................9 Starting your appliance ...................................................9 Turning your appliance "ON" or "OFF" ...........................9 Adjusting the temperature ..............................................9 Refrigerator operation ....................................................9 Alarms.............................................................................9 Door ajar ....................................................................9 Temperature sensor fault ...........................................9 High and low temperature alarm ...............................9 Important Safety Instructions Warnings and safety instructions appearing in this guide are not meant to cover all possible conditions and situa- tions that may occur. Common sense, caution, and care must be exercised when installing, maintaining, or operat- ing this appliance. Recognize Safety Symbols, Words, and Labels. ! WARNING WARNING-You can be killed or seriously injured if you do not follow these instructions. CAUTION-Hazards or unsafe practices which could re- sult in personal injury or property / product damage. NOTE-Important information to help assure a problem free installation and operation. State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer. WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm..

XXXXXXXXXXXX XXXXXXXXXXXX FIREMAGIC CITY OF INDUSTRY, CA 91746 ! WARNING WARNING - Help Prevent Tragedies Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous - even if they sit out for "just a few hours". If you are getting rid of your old refrigerator, please follow the instructions below to help prevent acci- dents. Before you throw away your old refrigerator or freezer: • Take off the doors or remove the drawers. • Leave the shelves in place so children may not easily climb inside. ! WARNING WARNING - Dispose of the plastic bags which can be a suffocation hazard. ! WARNING EXCESSIVE WEIGHT HAZARD Use two or more people to move product. Failure to do so can result in personal injury. Remove Interior Packaging Your appliance has been packed for shipment with all parts that could be damaged by movement securely fastened. Remove internal packing materials and any tape holding in- ternal components in place. The owners manual is shipped inside the product in a plastic bag along with the warranty registration card, and other accessory items. Important Keep your carton and packaging until your appliance has been thoroughly inspected and found to be in good condi- tion. If there is damage, the packaging will be needed as proof of damage in transit. Afterwards please dispose of all items responsibly. Note to Customer This merchandise was carefully packed and thoroughly inspected before leaving our plant. Responsibility for its safe delivery was assumed by the retailer upon acceptance of the shipment. Claims for loss or damage sustained in transit must be made to the retailer. DO NOT RETURN DAMAGED MERCHANDISE TO THE MANUFACTURER - FILE THE CLAIM WITH THE RETAILER. If the appliance was shipped, handled, or stored in other than an upright position for any period of time, allow the ap- pliance to sit upright for a period of at least 24 hours before plugging in. This will assure oil returns to the compressor. Plugging the appliance in immediately may cause damage to internal parts.

appliance. We recommend a location where the unit will be out of direct sunlight and away from heat sources. To - mended installation location temperature range is from 55 Cabinet Clearance Ventilation is required from the bottom front of the appli- ance. Keep this area open and clear of any obstructions. Adjacent cabinets and counter top can be installed around the appliance as long as the front grille remains unobstruct- ed. Front Grille Do not obstruct the front grille. The openings within the - energy usage and loss of cooling capacity. For this reason it is important this area not be obstructed and the grille openings kept clean. Firemagic does not recommend the Front Leveling Legs Figure 2 Rear Leveling Legs Front Grille, keep this area open. INSTALLING YOUR APPLIANCE Leveling Legs Adjustable legs at the front and rear corners of the appli- overall height of your Firemagic appliance may be adjusted between the minimum, 333 4 - 3 4 . To adjust the leveling legs, place the appliance on a solid lean the appliance back to access the front leveling legs. Raise or lower the legs to the required dimension by turning the legs. Repeat this process for the rear by tilting the appli- ance forward using caution. On a level surface check the appliance for levelness and adjust accordingly. The front grille screws may be loosened and the grille ad- justed to the desired height. When adjustment is complete

• Do not use an extension cord with this appliance. They can be hazardous and can degrade product performance. • This appliance should not, under any circumstanc- es, be installed to an un-grounded electrical supply. • Do not remove the grounding prong from the power • • Do not splash or spray water from a hose on the appliance. Doing so may cause an electrical shock, which may result in severe injury or death. ! WARNING Electrical Connection This product is factory equipped with a power supply cord that has a three-pronged, grounded plug. It must be plugged into a mating grounding type receptacle in accor- dance with the National Electrical Code and applicable lo- not have a grounding type receptacle, it is the responsibility and obligation of the customer to provide the proper power supply. The third ground prong should not, under any cir- cumstances, be cut or removed. - sance tripping which will cause the appliance to shut down. GFCI’s are generally not used on circuits with power equip- ment that must run unattended for long periods of time, un- less required to meet local building codes and ordinances. Front grille screw Front grille Figure 5 INSTALLING YOUR APPLIANCE Figure 3 Figure 4 Do not remove ground prong

FOR FREESTANDING INSTALLATIONS ! CAUTION NOTE Bottom View of Refrigerator Anti-Tip Bracket Leveling Leg Front of cabinet 2" Floor Mount Installation Step by step instructions for locating the position of the bracket: the anti-tip bracket. 4 allow engagement with the anti-tip bracket. Level the unit by adjusting all the leveling legs as required. Turning the leveling leg counterclockwise will raise the unit and clock- wise will lower the unit. where the anti-tip bracket will be installed. If the installation does not allow marking the rear corner of the cabinet, then of the cabinet, excluding the door. Slide the refrigerator out of the way. From the temporary line extend the sidewall line 2 the side of the bracket lines up with the side of the cabinet mark, and the "V" notches on the anti-tip bracket line up 2 cabinet leveling leg slides under the anti-tip bracket engag- ing the slot. ! WARNING • ALL APPLIANCES CAN TIP RESULTING IN INJURY. • INSTALL THE ANTI-TIP BRACKET PACKED WITH THE APPLIANCE. • FOLLOW THE INSTRUC- TIONS BELOW material to avoid damage when moving the unit. Anti-Tip Device ! WARNING If your refrigerator is not located under a counter installed as per these instructions. If the refrigerator is removed from its location for any reason, make sure that the device is properly engaged with the anti-tip bracket when you push the refrigerator back into the original location. If the device is not properly engaged, there is a risk of the refrigerator tipping over, with the potential for property damage or personal injury.

FOR FREESTANDING INSTALLATIONS 2" "V" notches in bracket "V" notches in bracket Side of cabinet line Figure 8 Front of cabinet line Rear of cabinet line Rear Leveling leg Screw Figure 8a NOTE - mum adjusted height of the cabinet is increased by 3 8

CABINET DIMENSIONS MODEL "A" "B" "C" "D" "E" "F" "G" "H" "J" 3589-DR 3589-DL 24" **34" to 35" * 23 8" 333 4" to 343 4" 2323 32" 26 32" 46 32" 269 " "F" 2" * Depth dimension of rough-in opening may vary depend- ing on each individual installation. To recess entire door "F" is required. ** Minimum rough-in opening required is to be larger than the adjusted height of the cabinet. all local building codes when installing electrical and appli- ance. PRODUCT DATA MODEL ELECTRICAL REQUIREMENTS # PRODUCT WEIGHT 3589-DR 3589-DL "D" "E" "H" "J" "G" PRODUCT DIMENSIONS ! WARNING Floor mount Anti-tip Bracket must be installed for freestand- ing applications. Not required for built in applications. "A" "B" "C" "D" "E" If necessary to gain clearance inside the rough-in opening a hole can be cut through the adjacent cabi- net and the power cord routed through this hole to a power outlet. Another way to increase the available opening depth is to recess the power outlet into the rear wall to gain the thickness of the power cord plug. Not all recessed outlet boxes will work for this applica- tion as they are too narrow, but a recessed outlet box Figure 9 Figure 9a

Starting your refrigerator Plug the refrigerator power cord into a wall outlet. Your refrigerator will begin cooling after power is applied. If your refrigerator does not start, check that the refrigerator is turned on and the set temperature is cold enough. Turning your refrigerator ON or OFF If the refrigerator is on, the refrigerator temperature will be shown on the display. To turn the refrigerator off, press and appear on the display. If the refrigerator is not on, "OFF" will be shown on the display. To turn the refrigerator on, press and hold the "ON/ - perature will be shown on the display. Set temperature To set the refrigerator temperature, press and hold the "SET" button. When the "SET" button is pressed, the display will show the set temperature. While holding the "SET" button, press the "WARMER" or "COLDER" buttons to adjust set temperature. Refrigerator operation It may take up to 24 hours for your refrigerator to reach desired temperature. This will depend on amount of content loaded and number of door opening and closings. For best results allow refrigerator to "pull down" to desired set temperature before loading. Once contents are loaded, allow at least 48 hours for temperature to stabilize before making any adjustments to the set temperature. Set Colder Warmer ON/OFF Press and Hold Press and Hold Alarm F close-up of control • Temperature Sensor Fault: If the control- ler detects that the temperature sensor is not properly functioning, a temperature the top left of the display below the word "Alarm" will be il- luminated. Please call Firemagic Customer Service or your dealer if this error code is displayed. • High and Low Temperature Alarm: If your unit reaches an unacceptable tempera- ture outside of your set-point, the alarm will ing upon the condition and the Alarm LED light at the top left of the display below the word "Alarm" will be illuminated. These alarms indicate that the compart- active until the condition is corrected. During initial appliance start-up, the high temperature alarm may sound until the interior temperature reaches set point. The high temperature alarm can also occur if the door re- warm product. After a high temperature alarm condition check all perishables to ensure they are safe for consump- tion. Alarms Your electronic control will monitor refrigerator function and alert you with a series of audible and visual alarms. • Door Ajar Alarm: If the door has been left the top left of the display below the word "Alarm" will be il- luminated. This will stop as soon as the door is closed. Alarm Mute Press any key to mute the audible portion of an alarm. This action will only mute the alarm. If the condition that caused the alarm continues, the alarm code will continue to NOTE NOTE

Your appliance is equipped with a cantilever shelf system which provides maximum adjust ability and customizing of the shelving arrangements listed below. Refrigerator: 24" (61 cm) Wide Models: Door storage racks Tall bottle storage area - ver shelf ! CAUTION Never try to move a loaded shelf, remove everything from the shelf before moving. Use both hands when moving the shelf. To Add or Remove a Shelf Remove stored product from the shelf. Do not try to remove a loaded shelf from the appliance. Grasp the shelf front with insert the top hooks into the shelf support slots and drop the shelf down so the hooks drop over the bottom of the slots. Make sure your cantilever shelf is secure on the shelf sup- ports by pressing down on the shelf before loading. ! CAUTION Grasp the shelf by the front with both hands and rotate the front of the shelf up, then lift the shelf up and remove the shelf from the shelf ladders. Place hook on shelf into slot of shelf ladder to install

Front Grille - ings in front of the cabinet. At least once or twice a year, SHOCK HAZARD: Disconnect electrical power from the appliance before cleaning with soap and water. Cabinet The stainless steel cabinet can be washed with either a mild soap and water and thoroughly rinsed with clear water. Interior Wash interior compartment with mild soap and water. Do NOT use an abrasive cleaner, solvent, polish cleaner or undiluted detergent. Care of Appliance Avoid leaning on the door, you may bend the door hinges or tip the appliance. 2. Exercise caution when sweeping, vacuuming or mop- ping near the front of the appliance. Damage to the grille can occur. 3. Periodically clean the interior of the appliance as needed. In the Event of a Power Failure If a power failure occurs, try to correct it as soon as pos- sible. Minimize the number of door openings while the power is off so as not to adversely affect the appliance's temperature. Light assembly replacement All models use LED lamps to illuminate the interior of the appliance. This component is very reliable, but should one of the LED. ! CAUTION • Never attempt to repair or perform maintenance on the appliance until the main electrical power has been disconnected. Turning the appliance control "OFF" does not remove electrical power from the unit's wiring. • Replace all parts and panels before operating. ! WARNING Electrocution Hazard

Outdoor Product Long-Term Storage / Winter- ization: Time to Winterize, when the daily low ambient tempera- ! CAUTION Operation of the unit at ambient temperatures below the recommended Winterization temperature will void your war- ranty. 2. 3. Remove all contents. 4. If necessary, move the unit so you can gain access to the rear of the product. 5. Unplug the unit from the power outlet. 6. It is also recommended that the power to the outlet be turned-off if the circuit is not required for other items during the Winter season. When cleaning unit pay particular attention to any cracks and crevices that may have accumulated dirt and debris. 8. brush and vacuum to clean dirt and debris from be- neath the unit. 9. Thoroughly clean the toe-grille and re-install on the use a brush and vacuum to clean dirt and debris from the machine compartment. Thoroughly clean the rear access cover and re-install on the unit. Wipe down all interior surfaces with anti-bacterial cleaner to be followed with clean rinse water to remove any residual chemicals which could cause staining. Do not use any abrasive cleaners or scouring pads. Leave the door open and allow to completely dry out before closing the door. Thoroughly clean the door gasket with anti-bacterial cleaner to be followed with clean rinse water to remove any residual chemicals. Thoroughly clean the exterior with a cleaner approved for stainless steel. Do not use any abrasive cleaners or scouring pads. See "Stainless Steel Maintenance" on Any mounting hardware / fasteners that are showing signs of corrosion should be replaced. Once the exterior has been thoroughly cleaned, you may want to apply a coating of car wax to help protect against spotting from moisture, dirt, and debris that may accumulate on the surfaces during the Winteriza- tion period. • If the plastic defrost drain pan located under the compressor contains water, use a sponge to remove as much water as possible. Start-Up After Long-Term Storage: If stored outside, it is recommended that the unit again be thoroughly inspected per the storage instructions above to address any dirt or debris from the weather and/or animals/insects. 2. Connect the unit to electrical power. 3. 4. Allow 24-hrs for the unit to stabilize before loading contents. Grille Spacer Clean out behind grille Soak up water from plastic drain pan if necessary Clean out debris Remove screws around perimeter of access cover. Do not place a cover on the unit, as this can trap con- densation. After completion of the above, you may choose to store the unit indoors, although this is not required. Remove screw from each end of grille Access cover

Background Stainless steel does not stain, corrode, or rust as easily as ordinary steel, but it is not stain or corrosion proof. Stain- less steels can discolor or corrode if not maintained prop- erly. Stainless steels differ from ordinary carbon steels by the amount of chromium present. It is this chromium that surface can be damaged or contaminated, which may result in discoloration, staining, or corrosion of the base metal. Care & Cleaning Routine cleaning of the stainless steel surfaces will serve to greatly extend the life of your product by removing contami- nants. This is especially important in coastal areas which can expose the stainless to severe contaminants such as It is strongly recommended to periodically inspect and thor- oughly clean crevices, weld points, under gaskets, rivets, bolt heads, and any locations where small amounts of liquid could collect, become stagnant, and concentrate contami- nates. Additionally, any mounting hardware that is showing signs of corrosion should be replaced. Frequency of cleaning will depend upon the installation location, environmental, and usage conditions. Choosing a Cleaning Product The choice of a proper cleaning product is ultimately that of the consumer, and there are many products from which to choose. Depending upon the type of cleaning and the degree of contamination, some products are better than others. cleaning of most stainless steel products is to give the sur- faces a brisk rubbing with a soft cloth soaked in warm water and a gentle detergent, or mild mixture of ammonia. Rub- bing should, to the extent possible, follow the polish lines of the steel, and always insure thorough rinsing after cleaning. Although some products are called "stainless steel clean- ers," some may contain abrasives which could scratch the and some many contain chlorine bleach which will dull, tarnish or discolor the surface if not completely removed. After the stainless surfaces have been thoroughly cleaned, a good quality car wax may be applied to help maintain the Stainless steel products should never be installed, or stored in close proximity to chlorine chemicals. Whichever cleaning product you chose, it should be used in strict accordance with the instructions of the cleaner manufacturer. The following suggestions will minimize the cost of operating your refrigeration appliance. Do not install your appliance next to a hot appliance heat sources. 2. Install product out of direct sunlight. 3. Ensure the front grille vents at front of appliance be- neath door are not obstructed and kept clean to allow ventilation for the refrigeration system to expel heat. 4. 5. When initially loading your new product, or whenever large quantities of warm contents are placed within refrigerated storage compartment, minimize door down to compartment set temperature. 6. Maintaining a relatively full storage compartment will require less appliance run time than an empty compart- ment. Ensure door closing is not obstructed by contents stored in your appliance. 8. Allow hot items to reach room temperature before plac- ing in product. 9. Minimize door openings and duration of door openings. Use the warmest temperature control set temperature that meets your personal preference and provides the proper storage for your stored contents. riods, set the appliance to warmest acceptable tem- perature for the stored contents. appliance requires the door to be open for an extended period of time. Energy saving tips: NOTE

the appliance until the main electrical power has been disconnected. Turning the appliance control "OFF" does not remove electrical power from the unit's wiring. • Replace all parts and panels before operating. ! WARNING Electrocution Hazard Before You Call for Service If the appliance appears to be malfunctioning, read through - shooting guide below. Locate the problem in the guide and refer to the cause and its remedy before calling for service. The problem may be something very simple that can be solved without a service call. However, it may be required TROUBLESHOOTING Problem Possible Cause Remedy Appliance not cold enough • Control set too warm • Content temperature not stabi- lized. • Excessive usage or prolonged door openings. • • Door gasket not sealing properly. • Adjust temperature colder. Al- low 24 hours for temperature to stabilize. • Allow temperature to stabilize for at least 24 hours. • page 4. • Replace door gasket. Appliance too cold • Control set too cold • Door gasket not sealing properly. • Adjust temperature warmer. Allow 24 hours for temperature to stabilize. • Replace door gasket. No interior light. • Failed LED light assembly or light switch. • - cian. Light will not go out when door is closed • Door not activating light switch. • Failed light switch • Appliance not level, level appli- • - cian. Noise or Vibration • Appliance not level • Fan hitting tube obstruction. • • - cian. Appliance will not run. • Appliance turned off • Power cord not plugged in. • No power at outlet. • • Plug in power cord. • Check house circuit.

What is covered and for how long? This warranty covers all defects in workmanship or materials for a period of: The warranty commences on the date the item was purchased and the original purchase receipt must be presented to the authorized service center before warranty repairs are rendered. What is covered? 2. The components of the sealed system e.g. hermetic compressor, condenser and evaporator from manufacturing de- fects for a period of 5 years from the date of purchase. Any damages to such components caused by mechanical abuse or improper handling or shipping will not be covered. What will be done? - - proval of Peterson. THIS WARRANTY DOES NOT COVER THE FOLLOWING: Damages from improper installation. Damages in shipping. Defects other than manufacturing. Damage from misuse, abuse, accident, alteration, lack of proper care and maintenance or incorrect current or voltage. Damage from other than household use. Damage from service by other than an authorized dealer or service center. Decorative trims or replaceable light bulbs. Transportation and shipping. THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. The remedy provided in this warranty is exclusive and is granted in lieu of all other remedies. This warranty does not cover incidental or consequential damages, so the above limitations may not apply to you. Some States do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This Fire Magic

previously purchased products.