Denon AVR-1908 Owner's Manual

The AVR-1908 is compatible with the following types of playback: • 5.1-channel playback 2-channel playback • Bi-amp playback (front speakers) NOTE • For bi-amp playback, use speakers compatible with that type of connection. • When conducting bi-amp playback, remove the short-circuiting boards (or wires) from the speaker terminals. Settings with the Amp Assign Function The Amp Assign function lets you assign the amplifiers for the different channels built into the AVR-1908 to the speaker outputs for the different zones. Select the desired playback ...

F Making bi-amp connections for the FL and FR channels and conducting 5.1-channel playback (switching with other modes not possible) Speaker terminal Amp Assign mode FRONT-A FRONT-B CENTER SURR SURR. BACK / Amp Assign R L R L R L R L Front A Bi-Amp FR-A FL-A FR-B FL-B C SR SL FR FL Front B Bi-Amp FR FL FL-A/FR-A Bi-Amp connection FL-B/FR-B Bi-Amp connection FL SW C FR SL SR 5.1ch FL/FR Bi-Amp Front A Bi-Amp Amp Assign mode: n Amp Assign mode setting and speakers connected to the various spea ...

F Menu screen F 1-1.Start Menu Step1:Speaker Detection at ear height at Front Sp. A Amp Assign Start Cancel Please place microphone main listening position. Audyssey MultEQ The speaker connection and polarity are detected at the first measurement position. The following attributes are also determined at this time: “Speaker Size”, “Speaker Distance”, “Channel Level”, “Crossover Frequency”. Once the measurements are completed, the results are displayed. Step 1 : Speaker Detection Start Start Au ...

[Selectable items] Auto : Automatically switch speaker from which test tone is output. Manual : Manually switch speaker from which test tone is output. f Channel Level Adjust channel levels to obtain equal volume from all speakers. • When the menu “Speaker Configuration” – “Surround Back Speaker” setting (vpage 24) is set to “1spkr”, the surround back speaker display is set to “SB” . • Speakers set to “None” in the “Speaker Configuration” settings are not displayed. • When “Channel Level” is adjusted, the adjus ...

Optimized setting for late-night listening. Operating from the remote control unit Press the NIGHT button. OFF LOW MID HIGH [Selectable items] OFF : Turn night mode off. LOW : Low setting. MID : Middle setting. HIGH : High setting. h Audio Delay Compensate for mismatched timing between video and audio. This cannot be adjusted when playing in the EXT. IN, DIRECT or STEREO mode (with “Front Speaker” set to “Large”, “Tone Defeat” to “ON” and “Room EQ” to “OFF”.) Delay audio. This sets the delay time for audio signals. [Variable range] 0 ms ~ 2 ...

Video camera / Game console Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly. Connections to Other Devices Component with Multi-channel Output connectors 46# 800'&3 $&/5&3 463306/% #"$, 3 - 463306/% 3 - '30/5 3 - "6%*0 R L R L R L R L R L R L DVD player / Super Audio CD player / External decoder • To play the analog input signals input to the EXT. IN connectors, press the EXT. IN button on the main unit or INPUT button on the remote control unit and se ...

Set dynamic range for downmix playback of Dolby Digital sources. • Set this to “ON” if the sound from the front speakers seems distorted. • When not using the center speaker or surround speakers, the playback sound is down-mixed and output from the front speakers. [Selectable items] ON : Compression is used. Select this if sound from front speakers is distorted. OFF : Do not use compression. This is the recommended setting. f Auto Surround Mode Make setting for memorizing surround mode setting for each input signal type. • The auto surround mode function l ...

[Input source] CD AUX CDR DVD/HDP TV/CBL VCR V.AUX [Selectable items] COAX1 : Assign COAXIAL 1 input connector. COAX2 : Assign COAXIAL 2 input connector. OPT1 : Assign OPTICAL 1 input connector. OPT2 : Assign OPTICAL 2 input connector. None : No digital input connector assigned. Input source CD AUX DVD/HDP TV/CBL VCR V.AUX Default setting OPT1 None COAX1 COAX2 OPT2 None 32 Getting Started Connections Setup Playback Remote Control Amp Assign Information Troubleshooting Input source DVD/HDP TV/CBL VCR V.AUX ...