EMAC PPC-080T-D525 Operation & User’s Manual

and testprocesses. Carefully selected components and accurate production ensure reliableoperation and long life.7KH0DQXIDFWXUHU warrants to the originalpurchaser that each touchPC delivered shall be free from defects in material or workmanship at time of shipment, and that each such module delivered will meet the published specifications for a period of 24 months as measured from the date of original shipment.7KH0DQXIDFWXUHUV obligation under theWarranty contained herein is limited to the repair or replacement of any touch PC that does not meet the specifications, provided that said product is returned toWKHPIJ, transportation charges pre-paid, and provided that uponPIJ's examination, the product, when tested within the specified ratings and in accordance with good engineering practice, does not meet the specifications as defined. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FORAPARTICULAR PURPOSE. All claims under warranty must be made promptly after occurrence of circumstances giving rise thereto and must be received within the applicable warranty period b\WKHPIJ or its authorized representative. Such claims should include the Product type and serial numbers and a full description of the circumstances giving rise to the claim. Before any Products are returned for repair and/or adjustment, written authorization fromWKHPIJ or its authorized representative for the return and instructions as to how and where these Products should be shipped must be obtained. Any product returned toWKHPIJ for examination shall be sent prepaid via the means of transportation indicated as acceptable b\WKHPIJ.7KH0IJ reserves the right to reject any warranty claim not promptly reported and any warranty claim on any item that has been altered or has been shipped by non- acceptable means of transportation. When any Product is returned for examination and inspection, or for any other reason, Customer will be responsible for all damage resulting from improper packing or handling and for loss in transit, notwithstanding any defect or nonconformity in the Product. In all casesWKHPIJ has sole responsibility for determining the cause and nature of failure, andWKHPIJ's determination with regard thereto shall be final. If it is found thatWKHPIJ's Product has been returned without cause and is still serviceable, Customer will be notified and the Product returned at Customer's expense. In addition, a charge for testing and examination may, inWKHPIJ's sole discretion, be made on Products so returned. SELLER'S LIABILITY FOR DAMAGES SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY SELLER FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED OR TO BE FURNISHED AS THE CASE MAY BE WHICH IS THE SUBJECT OF CLAIM OR DISPUTE. IN NO EVENT SHALL SELLER BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. LIABILITY TO THIRD PARTIES, FOR BODILY INJURY INCLUDING DEATH, RESULTING FROM SELLER'S PERFORMANCE

instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A “Critical Component” is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. If your device does have a defect within the warranty period, please contactWKHPIJ directly. The warranty period is 24 months from the date of purchase under the following conditions: l l l l l l l All warranties are void if the unit has been opened or disassembled withoutPIJ's prior approval. Damage caused by improper handling or operation, by incorrect installation or storage, through improper connections, as well as due to force majeure or other external influences are not covered by the warranty. For warranty claim, we reserve the right to replace the defective components or to exchange the device. Exchanged components or devices become the property ofWKHPDQXIDFWXUHU. Claims for damages are excluded in so far as they are not based on intent or gross negligence of the manufacturer. After expiration of the warranty period, warranty claims can no longer be pursued. Any warranty claim must be accompanied by proof of purchase (receipt or invoice). To the buyer of this product: Electrical Safety Tips: Thank you for purchasingWKH touch-screen PC. You have purchased a small and powerful desktop system that is suitable for use in harsh work environments. It is distinguished from standard PC systems through silent operation and an increased stability, especially through the robust aluminum housing and by the lack of moving part. Not to mention the high quality and attractive design (the housing is made out of refined aluminum) the touch-screen PCs are made for the use in industry, in machine control, in the Home automation, in the digital signage field, and many other application fields. To avoid mistakes and for the optimal use of the touch-screen computers, please read this manual in detail before first use. The device should only be opened by technical service personnel. Improper opening can result in loss of warranty. Please separate the touch PC from the power supply before opening. Operating Safety: Ongoing changes: i3URGXFHGLn China with German know-how and quality management. Your feedback is the most valuable information for the improvement of our products. Continuous production and product improvement is our primary goal. For this reason, there may be improvements in our products which are not yet included in this user's guide. Differences between your product and this user's guide are generally related to specification changes and product improvement l l l l l Please check before first use if all the external adapter and cables are properly connected. The PC must not have in any case loose objects, especially any exposed, conductive objects. Otherwise there is the risk of a short circuit and the permanent damage to the touch PC. Dust, moisture and temperature jumps drastically shorten the life of the touch screen PC. Please avoid, if possible, these external negative factors. Although the touch PC is provided with an anti-vibration mechanism please do not drop the PC and try to avoid strong and jarring movements. Please clean your touch PC not with chemical supplies but use a dry cloth for cleaning. 12

Touch Driver Installation Disk C Ltd.2009 01 T 02 04 05 06 07 08 09 10 11 12 additional screwable 13 Power on/off 14 15 16 W-Lan connector 17 ouch-PC with VESA-100 USB2.0 03 Ear-Out 10/100/1000MBit network interface 10/100/1000MBit network interface 2xUSB2.0 USB2.0 COM1 VGA-Out 12V DC-IN COM2 12V DC-IN; PIN1: +12V DC PIN 2: GND PIN 3: free W-Lan connector Mic-In 220V power supply 18 Touch pen, manual and installation CD of Windows or Linux . Components of 15" 17"19" touch PC : Touch Driver Installation Disk C Ltd.2009 01 02 04 Touch pen 05 06 Power on/off 07 2x USB2.0 08 Mic-In 09 Ear-Out 10 10/100/1000MBit n 11 10/100/1000MBit n 12 2x USB2.0 13 COM1 14 VGA-Out 15 12V DC-IN 16 W-Lan connector 17 W-Lan connector 18 COM2 19 additional screwable 12V DC-IN; PIN1: +12V DC PIN 2: GND PIN 3: free Touch-PC with VESA100 220V power supply 03 CD for installation of Windows or Linux etwork interface etwork interface Manual 14

software installation, use and maintenance the respective user is responsable. On the bundled driver CD are Windows and Linux drivers for the Touch PCs included. If you purchased the system with a SSD, a current image is already installed with which you can become familiar with the hardware and the use of the touch-panel. connect your touch PC simply with the in delivery includedAC adapter or use an equivalent 12V DC power source with at least 5ADC. To start the system, press the On / Off button. To start, If you have bought the touch PC without hard disk and RAM, please follow the following instructions. Due to the small size of our touch-PC solutions an installation of a conventional hard drive due to potential heat problems is not recommended for model sizes less than 15 ". Please only use SSD drives with 2.5" size and max. 7mm height or 1.8” SSDs. The subsequent RAM and hard disk is complicated, for these activities the mainboard must first be taken off. This should be done only by a computer specialist. Not experienced PC users, we explicitly recommend to buy a model with memory and hard disk included. additional screwable DC-connector: The touch PC-series has an additional screwable power connector. The PIN assignments are: PIN1: +12V DC PIN 2: GND PIN 3: not used Please take care of the right polarity, otherwise your PC is irrevocably destroyed. Please see paragraph “Components”. l l Commissioning and Installation 16 BIOS-settings In the following, the most important BIOS settings are explained. Please note that the BIOS is a special BIOS for PC's with built-in display solutions. Accordingly, it can occur after adjustments to the BIOS that you see no image on your monitor. For this reason, only experienced users should make changes to the BIOS. If the system is wrongly adjusted, proceed as described in the following: press (even if you see no image) on a connected keyboard the Delete key until you are sure you are in the BIOS. Then press F9 Enter F10 Enter. The system will reboot and you should have on an external monitor again a picture. Make sure that you save your changes before leaving the BIOS (F10). The major graphic settings to use the touch PCs internal built in monitor: Intel Video (Intel IGD) Control Sub-Menu IGD - BootType: VBIOS Default IGD – LCD Control Sub-Menu IGD – LCD PanelType: choose the original resolution of your monitor l l l l l Pre-installation Linux-Software (Optional) Ubuntu 9.04 has been preinstalled in the Touch-PC with SSD. The User Name is "user". The password is „user123“. Please look also on the desktop. There is a text file with the current password information. For the calibration please use the preinstalled program "eGalaxy".You can start the program from the desktop. If you will change the password, please open a terminal. Type "sudo su", then press "Enter". The password is "user123". Please chose "passwd user" and give your new password.

please download from our website the actual manual for the use of the touch-function. Please do a recalibration to improve the exactness of the touch panel. l l l l First, check whether the power supply is properly connected and working (green LED on the power supply). when you install new video card drivers, the BIOS is under certain circumstances adjusted and there is no boot screen to see. Wait a minute or two until Windows is loaded. connect an external keyboard via USB and check wether the Num Lock LED illuminates (press Num Lock on the keyboard). When it lits, there is usually only a misaligned BIOS. Turn off the PC, reboot and then press DELETE so often until you are sure that you are in the BIOS. Set the graphics options in the BIOS following the Chapter BIOS settings. leads none of the above suggestions to success, please contact our direct manufacturer service under the below shown contact information. Since the Touch PC series is widely used in industry applications, we offer a number of extensions that you can order from our distribution partners. See a selection below: Solid VEAS-100 Stand, Housing adaptations, integration of e.g. Card readers, scanners, printers Expansion of the possible operating voltage to 6 - 36V DC W-LAN support via mini-PCI-E with external W-LANAntenna Internal use of the Mini-PCI-E slot, the COM and USB ports for additional devices such as GPS, GPRS, UMTS devices with RAM, SSD IPprotection classes, other touch technologies Buttons and ports in the front In project business, further adjustments are possible to meet your requirements. l l l l l l l 7RXFK3&6SHFLILFDWLRQ PC-specification Monitor and Touch-Panel-Spezification CPU Chipsets Memory Graphic Audio Network Storage interfaces USB Back Panel Connectors Internal I/O Connectors Input voltage Operating temperature Driver Intel Atom N270 North Bridge: Intel 945GSE South Bridge: Intel ICH7M Support 1x DDRII 533 S0Dimm up to 2GB GMA950 Graphics Card Realtek ALC 662 5.1 Channel Realtek 8111C, supports 10/100/100MBit 2x S-ATA 300MB/s ports 6x USB 2.0 ports, 4 on the backpanel VGA 4x USB 2.0 2x RJ-45 Audio-In / Audio-Out 12V DC-In 1x MiniPCI-E 2x S-ATA 300MB/s ports 1x Front Panel Audio header 3x USB 2.0 header 1x IR header 4x COM/RS232 header 1x front panel header 12V DC-In 0° to +60° Windows, Linux, with SSD Linux Ubuntu 9.04 preinstalled 2xCom-Port (Rs232) additional screwable 12V DC-In 18 Touch-panel: Touch-connector: Touch-panel-driver: Touch life (contacts): Response time touch-panel (ms): Surface hardness: Input force (g): Mounting: Aspect ratio: Brightness (cd/m2): Contrast: Visual Angle horizontal, vertical (°): Physical resolution 4-wire resistive USB Windows, Linux, Apple > 10 000 000 < 10 3H 20 ~ 150 VESA-100 holes 4:3 250 600:1 150;130 1024x768 10"PC 15"PC 4:3 250 500:1 160;160 1024x768 19"PC 16:10 300 1000:1 170;160 1440x900 17"PC 4:3 250 1000:1 170;160 1280x1024

you resolve your problems. Please check the manual and our frequently asked questions before contacting us – you will usually find an answer to your question.