Digital Watchdog V1362DIR Operation & User’s Manual

MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON MASK 5 OFF / ON MASK 6 OFF / ON EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET SYNC SYNC INTERNAL / AUTO V-PHASE 0 ~ 199 EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET SETUP CAMERA ID 0 ~ 254 TITLE EDIT OFF / ON DPC OFF / AUTO DPC (Dead Pixels Cancellation) MONITOR CRT / LCD (Select LCD only if the camera is directly connected to LCD monitor.) LANGUAGE English / Chinese BAUDRATE 2400 / 4800 / 9600 / 14400 / 19200 / 38400. (The protocol is PELCO-D. It is fixed and cannot be changed.) OMNI LENS OFF / 1 ~ 10 (OMNI-Plus Cameras Only) EXIT ...

warrants the Camera Series against defects in materials or workmanship as follows. LABOR : For the initial five (5) years from the date of original purchase, if the camera is determined to be defective, the Warrantor will repair or replace the unit, with new or refurbished product at its option, at no charge. PARTS : In addition, the Warrantor will supply replacement parts for the initial five (5) years. To obtain warranty or out of warranty service, please contact a Technical Support Representative at 1-866-446-3595 Monday through Fr ...

EXIT JUMP EXIT / SAVE & EXIT / FACTORY SET SETUP TITLE EDIT OFF / ON PC CONTROL (RS485 Control) CAM ID / ID DISPLAY (OFF/ON) / BAUDRATE (2400 / 4800 / 9600) The protocol is PELCO-D. LANGUAGE ENG / KOR / JPN / CHN1 / CHN2 / RUS / FRAN / SPAN / ITAL MONITOR CRT / LCD Select LCD only if the camera is directly connected to the LCD monitor. OSD COLOR 0 ~ 15 OMNI LENS OFF (OMNI-Plus Camera Only) ON ALARM / READ TIME / ALARM ZOOM / STAND BY / RETURN DEFECT WHITE DEFECT CANCEL MODE EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET EXIT EXIT SAVE&EXIT FACTORY SET MODUEL OSD MENU* ...

MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON COLOR SET BLACK / GRAY / COLOR 1~ 6 EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET SYNC SYNC MODE INTERNAL / AUTO V-PHASE 0 ~ 199 EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET SETUP CAMERA ID 0 ~ 255 TITLE EDIT TITLE RESET TITLE POS. DPC OFF / ON DPC ( Dead Pixel Cancellation) LANGUAGE English / Chinese PC CONT. OFF / ON EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET EXIT EXIT Exit the menu SAVE&EXIT Exit the menu and save the setting FACTORY SET Reset the menu setting to factory default MODUEL OSD MENU*-V1363TIR EXPOSURE COLOR DAY&N ...

■ Do not open the case except during maintenance and installation, for it may be dangerous and can cause damages. ■ Do not put objects into the unit. ■ Keep metal objects and flammable substances from entering the camera. It can cause fire, short- circuits, or other damages. ■ Be careful when handling the unit. ■ To prevent damages, do not drop the camera or subject it to shock or vibration. ■ Do not install near electric or magnetic fields. ■ Protect from humidity and dust. ■ Protect from high temperature. ■ Be careful when installing near the ...

Total number of pixels 768(H) X 548(V) Minimum Illumination 0.22Lux (F1.2, 30IRE-COLOR) 0.0Lux (LED ON) Resolution H: 690 TV Lines Effective Electric Spec Voltage DC 12[V] (11.0[V] ~ 20.0[V]) AC 24[V] (20.0[V] ~ 30.0[V]) Power Consumption DC12V-3.1W / AC24V-3.2W COMMON General Spec Shutter speed AWB ATW / AWC / MANUAL / PUSH LOCK S/N Ratio Mirror ON / OFF Gamma Motion Detection ON / OFF Sync System Privacy Zone 4 Programmable Zone / Size Mechanical Spec Operation Temperature -10℃ ∼ +50℃ (14 oF ~ 131 oF) Stora ...

BLC OFF / ON BLC (Back Light Compensation) AGC HIGH / MIDDLE / LOW / OFF AGC(Auto Gain Control) MAX_DR OFF / ON (0~20) (Electronic Wide Dynamic Range) STARLIGHT AUTO (x2 ~ x256) / OFF (x32 is recommended for low light application.) EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET COLOR WB MODE AWC / ATW / MANUAL / PUSHLOCK (AWC is recommended.) R-Y GAIN 0 ~ 255 B-Y GAIN 0 ~ 255 EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET DAY & NIGHT Day & Night Mode AUTO : READ TIME(3~63) / S-LEVEL(0~100) / E-LEVEL(0~100) COLOR---->BW : Switching fro ...