DisplayTen DTen Operation & User’s Manual

User Manual

Before operating the unit, please read and observe the following precautions to avoid dangerous or illegal operating conditions. Environment Do not use the device in dusty, damp places to avoid electrical fault inside the device. Do not put the device in the vicinity of electric heating and other hot objects. Normal operating temperature is 0 ~ 40℃. Normal operating humidity is 10~90%. Children's Health The device and accessories may contain small parts, please put it out of reach of children to avoid danger. Battery Please keep the battery away from kids and don't throw t he battery into fire. Do not use metal objects with the battery poles butting or contacting the endpoint of the battery to avoid short circuit. Waterproof This device is not waterproof. Maintenance This device can only be maintained by certified engineer. Do not insert any sharp objects into the device. Do not drop, collision of the device, so as not to damage the device. u   Note: Image shown in this manual is indicative only. If there is any inconsistency between the image and the actual product you receive, the actual product will govern.

Transmitter Remote Control Technology RF 2.4GHz Weight 50±2.5g Weight(without battery) 28g Distance Control ≤15m Battery AAA batteries Operating Voltage 1.5V Standby Current <50uA Dimensions 162.8*16.95*16.04mm Receiver Operating System DTen System Compatible Interface USB2.0, Compatible with USB1.1&USB3.0 Power supply USB Dimensions 20.6*12*4.5mm Weight 2g

Pen Point Round Key Up Key Down Key Square Key Receiver

Round key Customize button Up key Page up Down key Page down Square key Click to open DTen Note u  Operation Tips 1.   Remove the receiver from the bottom of the smart pen and insert it to the available Android USB port on the intelligent tablet 2.   The receive distance of the receiver will be reduced due to the interference of electronic devices around. 3.   The product automatically enters the Sleep state when idle, can wake up by pressing any key. u  Battery Installation The product is powered by an AAA battery. Insert the battery correctly oriented according to the direction shown below. Ensure that the positive (+) and negative (-) terminals are installed correctly.

1.   Do not reverse the positive (+) and negative (-) terminals. 2.   Do not keep the exhausted or damaged battery inside the product. 3.   Remove the battery if the product will be left idle for a long time. 4.   Replace the battery with a new one if the product cannot implement functions as desired or if the remote control distance is reduced. Warm reminder: Please drop waste batteries in the dedicated battery recycle bin or hand them over to related departments; otherwise, waste batteries will pollute the environment.