Encore E-4 Operation Manual

1 E 4 PROFESSIONAL 2-WAY LCD REMOTE ALARM SYSTEM OPERATION MANUAL Please register your product at www.encoreautomotivesystems.com THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY

2 LCD REMOTE CONTROL TRANSCEIVER: A. BATTERY CHANGING: Depending on the usage, the remote batteries should be changed at least once a year in the one way remote and once every 4-5 months for the two-way remote. The 1-way remote, (E-7s) is powered by a pair of 3V, CR2016 batteries. These batteries are available at most locations batteries are sold and can be replaced by the user. Battery Level Indicator (2-way remote) The Battery Level indicator has three level indicators that serve as a visual indication of battery charge. When the battery reaches a low charge level that requires changing, the remote control will generate a single notification chirp, and the Battery Level indicator will flash continuously. If the battery voltage is LOW, the range of the remote will be reduced by 50% to conserve battery life. The two way remote requires 2, 3 Volt CR2032 batteries. The operation lives of these batteries are affected by many factors including, temperature, usage, back-light ON time and programmable “in range status settings”. Do not allow these batteries to corrode or become wet for any extended period of time.

3 B. STANDARD LCD ICON CONFIGURATIONS: The lock icon will be displayed when the door locked and the system is armed. The unlock icon will be displayed when the door unlock and the system is Disarmed. Driver paging Someone is paging you in your vehicle Valet Mode Remote start and alarm functions temporarily disabled Hood Trigger Hood is illegally opened (Zone 1) Trunk Trigger Trunk is illegally opened (Zone 2) Door Open Warning Doors are illegally opened (Zone 3) Sensor Trigger Trigger on Sensor 1 (Zone 4) Ignition Trigger Ignition switch is illegally turned on (Zone 5) System trigger Remote Transmission You are transmitting the signal to control unit In – Range Indicator You are within the range of the remote control. Anti Car-Jack Mode Activate the anti car-jacking mode Button Lock (icon on) Activate Channel 3 (Trunk Release). Activate Channel 4     Time Monitor    Alarm Clock Alarm clock set. Parking Meter Reminder when time is up for parking + Pressing the Star and trunk buttons together Briefly will turn ON the transmitter backlight Low Battery You have to charge the battery of remote control.

4 OPERATION: REMOTE TRANSMITTER OPERATION: Transmitter Button System Function Remark Lock Doors & Arm System Panic function Press and Hold for 3 seconds. Press Trunk button to stop panic function Car Locator Press when in armed mode - Arm and Delete The 2 Stage Shock Sensor Press twice within 3 seconds. Pass will appear on the remote + Silent Arming / Disarming Ignition in "off" position. + Active Anti Car-Jacking Mode Ignition in "on" position press and hold for 2 seconds Unlock Doors & Disarm System - Two Steps Door Unlock & Disarm System (optional) Press twice within 3 seconds. Trunk Release (Channel 3) Press and Hold for 2 seconds - Passive Arming By-pass While the system Disarmed. + Channel # 4 Timer Output (4) Optional + Channel # 5 Timer Output (5) Optional + Turn ON the backlight Two-way remote CHIRP INDICATORS: PARKING LIGHT: Chirp Function Parking light Function 1 chirp Arm 1 flash Arm 2 chirps Disarm 2 flashes Disarm 3 chirps Defective Reminder 3 flashes Disarm / Triggered 4 chirps Disarm / Triggered 12 flashes Car Locator 6 chirps Car Locator Constant On Under Remote Start ALARM OPERATING CONDITION: Siren / Horn Parking Light LED Doors Starter Dome Light 1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disable 2. Disarming 2 or 4 Chirps 2 or 3 Flashes Unlocking Turns on for 30 -second 3. Trigger Alarming Flashes Slow Flash Disable Flashes 4. Passive Starter Disable Fast Flash Disable 5. Panic Alarming Flashes Flashes 6. Car-Jacking Alarming Flashes Disable Flashes

5 7. Car Locator 6 Chirps 12 Flashes Locking E. ACTIVE ARMING – LOCK & ARM: 1. Press button on the transmitter. 2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The vehicle’s doors will lock upon arming if interfaced with the security system. DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. SILENT ARMING / DISARMING: Press the transmitter and buttons at the same time. This will arm or disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be through the vehicles parking lights only. SENSOR BY-PASS: The sensor bypass feature is programmed to activate for one arming cycle only. The security system will return to normal operation during the next arming cycle. Sensor By-Pass : Press the button two times within 5 seconds will arm the security system and by-pass the shock sensor. HIDDEN ALARM FUNCTION: Silent Alarm Press the button first; within 3 seconds press the button to activate the hidden alarm function. The security system will arm and with “Hidden Alarm Function” The siren / horn will be silenced even if the sensor is triggered in the armed mode. Alarm indication will only appear on the LCD Transmitter. F. PASSIVE ARMING (Programmable) Active arming / disarming is controlled by your security system via the remote transmitter. This security system is equipped with an optional Passive Arming feature which allows the security system to arm 30 seconds after the last door is closed. Operation is as follows. 1. Turn the ignition to the “OFF” position and exit the vehicle. 2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once all vehicle entrances are closed. 3. After the 30-second time has elapsed, the security system will automatically “ARM”. The siren will chirp [1] time and the parking lights will flash [1] time. PASSIVE ARMING WITH PASSIVE DOOR LOCKING The vehicle doors will automatically lock after the passive arming cycle has been completed. PASSIVE ARMING BY-PASS: While the system is disarmed, Press the button twice, the system will respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporary state for as long as you wish. To exit passive by-pass, press the transmitter or buttons and the system will return to normal status. G. ACTIVE DISARMING – UNLOCK & DISARM: 1. Press button on the transmitter. 2. The siren will chirp twice and the parking lights will flash twice indicating that the security system is now disarmed. The vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon disarming. (Note: Power door locks and dome light must be installed with the security system.)