DOD TX500 Operation & User’s Manual

3、檔案被保護鎖定後，此檔案在錄影中不會被刪除，機器最多保護 鎖定10筆，超過10筆會自動將最舊的保護檔轉成一般檔，持續 錄影仍會被刪除。 停止錄影後按一下MENU鍵進入錄影設定。 攝像頭設置 錄音：開啟或關閉錄音功能。 音量：設定音量大小或關閉音量。 位移偵測：開啟或關閉移動偵測功能。 錄影時間：設置錄影時間或關閉錄影時間。 關閉螢幕：設置螢幕開啟時間或永久開啟。 延時關機：設置開機時間或永不關機。 日期顯示：開啟或關閉日期顯示。 重力感測器： 日期/時間：更改系統時間。 語言：支持多國語言，可依您的喜好調整。 頻率：調整使用環境的光源頻率。 原廠預設值：將所有設定恢復到原廠預設狀態。 版本：查看系統版本號。 ：開啟雙攝像頭或單攝像頭。 設定G-Sensor觸發檔案保護的靈敏度。 1、停止錄影後按一下MENU鍵進入錄影設定。 2、選中攝像頭設置按確認鍵。 3、選擇2路攝像頭，按確認鍵，開啟雙向錄影。 4、選擇攝像頭1，按確認鍵，開啟左邊攝像頭。 5、選擇攝像頭2，按確認鍵，開啟右邊攝像頭。 1、錄影圖示 2、位移攝影 3、SOS緊急檔案圖示 4、可保存緊急檔案數量 5、麥克風 1、在錄影中，汽車前方擋風玻璃無隔熱紙或貼膜，錄影效果則最佳。 2、車前擋風玻璃，內外請保持清潔，避免影響錄影畫面品質。 3、雨天錄影時，如發現雨刷刷不乾淨玻璃，請及時更換雨刷，避免造 成雨天錄影品質不佳。 4、天晴錄影時，錄影畫面品質最佳，但注意如在逆光環境下錄影，畫 面則較暗，此為正常現象。 5、為了呈現更好的視頻及音頻效果，建議使用以下播放軟體播放： 暴風影音、Windows Media Player、Quick Time Player。 6、本機經過耐高 溫測試；但 了保障更長的壽命，夏日車內高溫， 如本機無需工作，建議移到陰涼處。 低 為 1、插入記憶卡 2、將車用電源分別插入汽車 點煙頭與主機 3、發動汽車 4、主機開機，系統將會自動 開始錄影 開機流程 1、停止錄影後按二下MODE鍵進入文件夾選項。 2、按上下鍵選擇到文件夾，確認鍵進入文件夾。 3、按上下鍵選擇到想要播放的影片。 4、按下確認鍵開始播放影片。 5、再一次按下確認鍵暫停播放影片。 播放流程 1、停止錄影後按二下MODE鍵進入文件夾選項。 2、按上下鍵選擇到文件夾，確認鍵進入文件夾。 2、按上下鍵選擇到想要刪除的影片。 3、按下MENU鍵進入選單進行影片刪除或全部刪除。 影片刪除 播放1080P 30fps影像電腦規格建議： 1、intel Core 2 Duo 2.0GHz 以上CPU 2、2G以上DDRII記憶體 3、支援DirectX 10以上規格之顯示卡 3 1 6 2 4 5 13、SOS緊急檔案鎖 14、喇叭 15、重置鍵 [00:37] 20 HD 10/31/2013 20 HD 1 2 3 4 5 6 8 7 9 6、錄像模式 7、電源 8、錄影時間 9、日期顯示及當前時間 TX500 10:10:07 8 7 9 10 11 12 13 15 14

Recommended PC requirements for 1080P 30fps video playing: 1、intel Core 2 Duo 2.0GHz or above CPU 2、2G or above DDRII RAM 3、Graphic card supports DirectX 10 or above Video Playback Software Operation Notes Power On/Off Switch On Please connect the vehicle cigarette lighter and start the engine, the device will be switched on immediately. When car engine stooped or car power disconnected, the device will shutdown in 10 seconds automatically. 1、For the users whose vehicle cigarette lighter keeps power supplying after the engine stopped, please unplug the car charger before leaving the vehicle. 2、Please use 8GB Class 6 or above Micro SD card. 3、Once the file be protected, the file will not be deleted by loop recording. The device can protect up to 10 files, if the 11th file be protected, the oldest protected file will be turned to unprotected file which will be deleted by looping recording. 1、Insert the memory card. 2、Connect the car charger into the vehicle cigarette lighter and the device. 3、Start the vehicle. 4、The device be turned on, and start recording automatically. Installation and Fixation Hardware Installation Guide Thank you for purchasing Our company product, please following the instruction to use the device correctly. Our company products are made of top materials to provide the best quality product with the best image quality to all customers. Recording notes 1、Recording in a car without film on windshield can ensure the best image recorded. 2 Please keep the windshield clean to prevent bad influence on image quality. 、 3 If windshield wiper can't clean the windshield, please replace it with a new one, or the image quality in the rainy day will be influenced. 、 4 Image quality will be better while recording in a sunny day, but please note in backlight position the image will be darker, it's the normal reaction while image sensor face the light straightly. 、 5 In order to present a better video and audio quality, we suggest using the following player software: Storm video, Windows Media Player,QuickTime Player. 、 Product Structure Recording Settings Recording image Standby Image TX500 3 1 6 2 4 5 1、 2、 3、 、Microphone 、USB/Vehicle Charger Power Supply Port 、Power switch HDMI Output Jack Micro-SD Card Slot Microphone switch 4 5 6 7 8 10 11 12 、Indicator 、UP 9、MENU Key 、MODE 、DOWN 、Video Recording/Camera/Confirm 13、SOS Emergency File Lock 14、Speaker 15、Reset key 1、Please insert the memory card into the SD Card Slot with the specified direction, and then use the bracket to fix the device inside the car. 2、When using the bracket, please choose the position carefully. Do not place the device in the position that blocks the driver's sight or affects the normal work of the airbags. 1、Recording image 2、Motion Detection 3、S.O.S file locking 4、Available number of file locking 5、Microphone 6、Recording mode 7、Power connected 8、Recording time 9、Date and Time After stopped recording, press MENU to enter the recording settings. S : To switch single or dual lens mode. Audio Recording：Toggle on or off the sound recording function. Volume: To set the sound volume or to switch it off. Motion Detection：Toggle on or off the motion detection recording function. Record Time: To set video length or to switch it off. LCD backlight: To set the screen working time or to make it work permanently. Shutdown Delay: To set opening time or never turn off. Date Stamp：Toggle on or off the data stamp function. GSENSOR：Set the sensitivity level of the G-sensor file protection . Date/Time：Set the system time. Language：Support multiple languages; you can choose the language according to your preferences. Light Freq.：Adjust the light frequency of use of the environment. Restore Default：Reset all the settings to the default state. Version： Check the system version number. elet Sensor Video-Play Operation Delete Video 1、Stop recording and press Mode button twice to enter folder mode. 2、Press Up/Down button to select folder, press Confirm button to enter the folder. 3、 4、 5、 Press UP or Down to select the desired video to play. Press CONFIRM to start playing video. Press CONFIRM again to pause the video. 1、Stop recording and press Mode button twice to enter folder mode. 2、Press Up/Down button to select folder, press Confirm button to enter the folder. 3、 、 Press UP or Down to select the desired video to delete. 4 Press MENU, enter the menu to delete the video or delete all. 6 Though this product passes temperature cycling test, in order toensure a longer working life, during the hot summer days, pleasestore the device in cool place while not working. 、 3、If there is any splotch, fingerprints or other kinds of smudginess inside or outside on the windshield, please wipe clean it before proceeding the installation. Lens switch 1、Stop recording and press MENU button to enter Recording Settings. 2、Select lens and press Confirm button. 3、Select dual-lens, press Confirm button to active dual-lens recording. 4、Select Lens 1 and press Confirm button to active left lens. 5、Select Lens 2 and press Confirm button to active right lens. [00:37] 20 HD 10/31/2013 20 HD 1 2 3 4 5 6 8 7 9 10:10:07 8 7 9 10 11 12 13 15 14