Edsyn Loner CL1180 Manual
Text of the manual
• 120V, 60Hz, 70W, 5 Oz (142 gm)
• TEMP. RANGE: 400°F - 800°F (205°C - 427°C)
• TEMP. REGULATION: ±6°F (±3°C)
• TIP TO GROUND LEAKAGE: < 2MV
• TIP TO GROUND RESISTANCE: < 2 OHMS
• COMPLIES WITH DOD-STD-2000-1B, MIL-
STD-2000A and ESD SPEC. DOD-STD 1868,
DOD-HDBK-263
LISTED
made
in
U S A
CL1180 LONER®
Temperature Controlled
SOLDERING IN
1. MAKE SURE YOUR TOOL IS
COOL!
2. Turn RS372 counter-
clockwise to remove.
3. Remove old Soldering Tip.
4. Insert new Tip.
5. Install RS372. (should be
"finger" tight only.)
SOLDERING TIPS
Iron Plated for long life•Nickel and
Chrome Plated for optimum heat transfer
CONTACT EDSYN FOR MORE SELECTIONS
b
a
a
b
Large and heavy
YOU WILL NEED THE MS412 TEMPERATURE CALIBRATION SYSTEM
TO MONITOR TEMPERATURE.
1.
Loosen RC334 to expose Temp. Control Screw.
2.
Using a clean and well-tinned tip do set up according to
illustration so that the thermocouple wire is hanging on
the tip.
3.
Apply a small amount of solder on the Tip, just enough to
form a solder bead on t
© Copyright EDSYN,Inc.1998
FORM .423
Rev E
CL1180 LONER® Soldering Instrument, 120V
Spare Parts List
1
LT375
LONER®Standard Spade Soldering Tip
1
2
RS372
Retaining Sleeve Assembly
1
3
RC334
Retaining Collar
1
4
SR081
Foam Grip, Vinyl
1
5
SR070
Heater Assy. 120V,
1
6
SR028
Power Cord
1
7
SR029
Boot, Bushing For Tool Cord
1
8
SR462
Handle, Model 920
1
9
SR
