Citizen Ana-Digi Temp JG2 Instruction Manual

start. • Each press on button ® switches the watch between 12-hour and 24-hour system. • Each press on button® adjusts Analog1 ("Hour" and "Mimute" blinksimulta neously) in 1/3 minute (20-second intervals) in clockwise direction. Adjust the Analog 1 indication to show the same time as the digital indication. • Each press on button ® adjusts Analog 2 ("00" and "Analog2 identification mark" blink simultaneously) in clockwise direction in 1-division intervals. Set to the 0-second position (12 o'clock). (4) Pr ...

start. • Each press on button ® switches the watch between 12-hour and 24-hour system. • Each press on button® adjusts Analog1 ("Hour" and "Mimute" blinksimulta neously) in 1/3 minute (20-second intervals) in clockwise direction. Adjust the Analog 1 indication to show the same time as the digital indication. • Each press on button ® adjusts Analog 2 ("00" and "Analog2 identification mark" blink simultaneously) in clockwise direction in 1-division intervals. Set to the 0-second position (12 o'clock). (4) Pr ...

Each press on button ® inthe Calendar mode switches the measuring interval between measurement each second or measurement each minute. The "*C" or "°F mark flashes in the selected measuring interval. However, when measure ment each second is selected, the measuring interval automatically returns to measurement each minute after about 3 minutes of measurement each second. ^Temperature Measurement Range and Measurement Accuracy> 14 Celsius ('C) Fahrenheit (*F) Display temperature range -9.9°C~+59.9*C 14T-139T Display unit 0.1 *C 1°F Measurement a ...

In the Calendar mode, the temperature measurement indication is shown in the digital display. [Normal Calendar Display] ] \ i r «=aa. u inf 5U ]« 2ML5- Temperature Day, Date —' (1) Press and hold button ® for2 sec onds or more while in normal Cal endar mode. The "Month" will start flashing in the lower part of digital display, indicating that the watch is in adjustment mode. (2) Each press on button ® inadjust ment mode changes flashing sec tion in the order of [Month -* Date -Year]. (3) Press button ® to adjust flashing section. (Press and ...

This Stopwatch can measure the time in 1/1000 sec. units up to "11 h, 59 m, 59 sec, 999". After 12 hours of measurement is completed, the indication returns to "00 h, 00 m, 00 sec, 000" and stops. Split time (elapsed time) measurement is also possible. [Stopwatch Reset Display] 3 m Measuring Time (Hours) •[ ] ® -g"TtTsiw J °"T •ODD' S (MI ]® Measuring Time (Minutes, Seconds, 1/1000 seconds) i? Operation Confirmation Sound In the Stopwatch mode, a confirma tion sound is heard each time button ® or ® is pressed. 21 ...