Conair CD122XC Instruction & Styling Manual

and continued enjoyment of this product, always read the instruction book carefully before using. Instruction & Styling Guide Model CD122XC s on g Guide C SPIRAL ® SERVICE CENTRE : CONAIR CONSUMER PRODUCTS ULC 100 Conair Parkway, Woodbridge, Ont. L4H 0L2 Printed in China 1-800-472-7606 Visit our Web site: www.conaircanada.ca Consumer Call Centre E-mail: [email protected] ©2013 CONAIR CONSUMER PRODUCTS ULC 13CN140314

For best results, use a light styling product before blow-drying hair. 1 Take a 1 in. wide section of hair, starting 2 in. from the scalp. 2 Wind the section of hair around the thicker portion of the barrel towards the cool tip. 3 Hold the end of the hair section in place at the cool tip for 5 to 8 seconds depending on hair type, and then release. No clamp allows you to easily curl hair without kinks. Spiral guide sets curvy, tangle-free spirals. For tighter, bouncier curls, roll less hair. For loose, free flowing curls, roll more hair. To set the curl, do not comb or brush hair until it cools. 4 Repeat process on additional sections of hair until you achieve the hair style you desire. Some experience is necessary when learning to use this curling wand. After using several times, you will learn the ideal way to curl and style your hair. IMPORTANT A heat protective glove has been supplied to help protect your hand from temporary contact with the barrel when wrapping the hair around the appliance. Please note that the heat protective glove is only designed to give initial contact protection. Discomfort will be caused by prolonged contact with the hot surface. USING INSTANT HEAT, THE 5 ULTRA-HIGH HEAT TEMPERATURE SETTINGS This styling wand features a ceramic heater that maintains constant temperature during use for precision styling. This Instant Heat technology has 5 ultra-high heat temperature settings. There is a temperature range that’s gentle and safe for every type of hair, from the finest to the most resistant, and helps you create the look you want. UNIFORM HEAT RECOVERY SYSTEM Conair’s professional salon standards of engi- neering provide you with a uniform and improved heat recovery system that maintains the wand at constant temperatures. There is a constant surge of power to ensure that heat is continu- ously and quickly delivered for optimal styling results, unlike other units, which lose heat dur- ing use. This provides consistent styling power so that every strand of your hair is set with the same level of heat and comes out the same way for a perfect finish.

Conair will repair or replace, at our option, your appliance free of charge for 60 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service centre listed below, together with your sales slip and $5.50 for postage and handling. In the absence of a receipt, the warranty period shall be 60 months from the date of manufacture. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MER- CHANTABILITY AND FITNESS FOR A PARTICU- LAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 60-MONTH DURATION OF THIS WAR- RANTY. IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM- AGES FOR BREACH OF THIS OR ANY OTHER WAR- RANTY, EXPRESS OR IMPLIED, WHATSOEVER. This warranty gives you specific legal rights, and you may also have other rights which vary from province to province. WARNING: IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG. KEEP AWAY FROM WATER Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged. ALWAYS UNPLUG SMALL APPLIANCES

unit is designed to be operated at 125V AC. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. TOURMALINE CERAMIC EASY-GLIDE BARREL The barrel of your new curling wand has a tour- maline Ceramic easy-glide surface, the newest technology. This means it’s not only simpler to clean off styling product residue, etc., after each use, but you’ll find that hair glides easily over the surface of the barrel as you’re curling. The tourmaline ceramic surface also helps smooth down flyaways and frizzies. It evenly distributes heat so that the style you create has a salon- perfect, silky smooth, shining finish. Hair also slips right through the barrel after it’s curled. The new Tourmaline Ceramic technology is a pleasure to work with and makes styling your hair easier and the results more professional. Never leave your curling wand on and unattended. However, should you fail to turn the unit off, it will shut itself off automatically with- in 60 minutes. GETTING STARTED Hair should be clean and completely dried before using the curling wand. Plug the wand into an electrical outlet. Turn on unit. The Power/ Low 285˚F setting will become illuminated. Allow unit to heat up for 30 seconds. WARNING: The curling wand’s barrel will get very hot within a few seconds and should not be placed in contact with the skin after the curling wand has been turned on. The wand’s unique 5 ultra-high heat temperature settings and Instant Heat technology provide styling versatility for all hair types. If you have fine hair, a low temperature will provide the best results. If you have thick, wavy or hard-to-curl hair, keep the heat setting on high. You can vary the wand’s temperature according to your particular need! Temperature Setting Guide LED TEMP. CONTROL HAIR TYPE Power/Low 285ºF Delicate, thin, easy-to-curl hair Medium 310ºF Average-to-thick or treated hair Med-High 330ºF Thick or wavy hair High/Max 360ºF - 400ºF Hard-to-curl hair

No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow to cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer. CAUTION NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the appliance. Damage will occur at the high flex point of entry into the appliance, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently. STORAGE When not in use, your appliance is easy to store. Allow appliance to cool, then simply store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections. Do not wrap the line cord around the appliance. Allow the cord to hang or lie loose and straight at the point of entry into the appliance. GETTING TO KNOW YOUR CURLING WAND Cool Tip Professional Swivel Line Cord 5 Ultra-High Heat Levels with LED Temperature Displays Counter Rest Auto Off Uniform Heat Recovery System 30-Second Instant Heat Grooved Tourmaline Ceramic-Coated Barrel Heat Protective Glove for Left Hand

children are present, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER DANGER – Any appliance is electri- cally live even when the switch is off. To reduce the risk of death by electric shock: 1. Always unplug appliance immediately after using. 2. Do not use while bathing or in the shower. 3. Do not place or store appliance where it can fall or be pulled into a tub or sink. 4. Do not place in, or drop into, water or other liquids. 5. If an appliance falls into water, unplug it immediately. Do not reach into the water. WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons: 1. This appliance should never be left unattended when plugged in. 2. This appliance should not be used by, on or near children or individuals with certain disabilities. 3. Use this appliance only for its intended use, as described in this manual. Do not use attach- ments not recommended by the manufacturer. 4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair. 5. Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around appliance. 6. Never use while sleeping. 7. Never drop or insert any object into any opening. 8. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 9. Unit is hot when in use. Do not let heated surfaces touch eyes or skin. 10. Do not place the heated unit directly on any surface while it is hot or plugged in. Use the stand provided. 11. Never block the air openings of the appliance or place on a soft surface such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint and other debris. 12. Do not use an extension cord with this appliance. 13. Do not touch hot surfaces of the appliance. Use handles or knobs. 14. Do not attempt to touch the housing of your appliance near the barrel, as it is hot when in use. 15. Do not operate with a voltage converter. SAVE THESE INSTRUCTIONS