Cypress CP-254 Operation Manual

I. Introduction Table 1 Spec. Signal Type Input Output Input Output Analog Analog Analog Analog Analog Digital/Analog Analog Digital/Analog Digital Digital/Analog Digital Analog Connector HD-15F HD-15F HD-15F DVI-I DVI-D HD-15F DVI-D RCA/4Din/7Din DVI-I HD-15F RCA/4Din/7Din DVI-I Model Format Input Output PC-RGB+HDTV-RGB/YPbPr(Auto/Manual) PC-RGB+HDTV-RGB/Y ...

input and converters to DVI-I (digital + analog RGB) output. 2. The input to the CP-254 is digital PC or HDTV signal in the fromat of either RGBHV or YPbPr/YCbCr data bitstream via 24-pin DVI connector. 3. The output of the CP-254 is digital + analog PC or HDTV signal in ...

Use the DVI-to DVI cable to connect the DVI output of a PC ot HDTV device to the DVI input connector of the CP-254. Output connection: The CP-254 can output a variety of PC resolution and HDTV progressive resolution, in both digital and analog format. To ...

A. For digital RGB (DVI) output, (Select DVI-D in the Output Setup of the menu). CP-254 CP-254 DVI Cable DVI out DVI in DVI Cable DVI Cable or or PC/Monitor PC/Monitor PC Resolutions PC Resolutions Plasma TV Projector Plasma TV Projector HDTV HDTV Resolutions HDTV Resolutions DVI cable DVI out DVD,STB,DVHS (a) PC in to Di ...

Setup of the menu). (b) HDTV in to PC or HDTV out DVD, STB,DVHS CP-254 Analog HDTV output HDTV in (a) PC in to PC or HDTV out DVI cable CP-254 Analog HDTV output VGA to YPbPr cable VGA to YPbPr Cable VGA cable Analog PC output PC PC in DVI cable DVI to VGA Adaptor VGA cable Analo ...

Front and Rear Panels DVI OUTPUT MENU - + DVI INPUT DC 5V Menu and Adjustments Pressing the Menu button will bring up the OSD menu controls on the screen as follows: * Input set up * Picture Adjust * HV Adjust * OSD Adjust * System Information * Auto Adjust * Exit Use +,- to move the arrow cursor to your desired select ...

4.2 Menu and Adjustments Output set up-When it is selected, a sub-menu as below appears. DVI-A DVI-D Mode XXXX-XX Select DVI-A when you would like to use analog output of CP-254. Select DVI-D when you would like to use digital output of CP-254. When DVI-A is selected, it gives you choice for the output mode as follow: ...

Manu and Adjustments The adjustment range and factory preset value as follows: Contrast Bright Color Range Default 0~255 0~255 0~255 047 102 064 Use +,- and MENU/Enter to adjust the value of your selected parameter. Select reset to reset all adjustment back to the factory preset value. HV adjust- When it is selected the following su ...

Input signal: Digital RGB data bitstream Input connector: 24-pin DVI-D connector Output format: Analog RGBHV+Analog RGBHV or YPbPr(through DVI to HD-15 adaptor) Output signal: Digital data bitstream Output connector: 24-pin DVI-D connector Power ...