D-Link DIR-810L Quick Installation Manual

PC. Keep the router in an open area for better wireless coverage. Step 4 Open a browser on the connected computer. If you are not automatically directed to the D-Link Setup Wizard, go to ‘http://dlinkrouter.local.’ and follow the onscreen instructions to configure your DIR-810L. Use ‘Admin’ as your username and leave the password blank to configure manually. Step 2 Unplug the modem Ethernet cable connected to your computer and plug it into the port labeled ‘INTERNET� ...

ETHERNET CABLE (CAT5 UTP) CONNECT THE ROUTER TO YOUR PC DURING SETUP If any of these items are missing from your packaging, contact your reseller. WI-FI CONFIGURATION NOTE CONTAINS THE DEFAULT WI-FI INFORMATION Wireless AC750 Dual Band Cloud Router DIR-810L CONTENTS Wi-Fi Configuration Note DIR-810L ...

SUBSCRIPTION USERS WHO SUBSCRIBE TO LIMITED OR “PAY AS YOU USE” BROADBAND INTERNET ACCESS. In the WAN configuration settings, there is a parameter called Maximum idle timer. This parameter controls how many seconds of inactivity before dropping connection to the Internet. The default setting is "0" which disables this functionality and the Internet will be connected all the time. We suggest that you should change the Maximum idle timer to "300" (5 minutes) or less if you are using a charged by the minute ...

SUBSCRIPTION USERS WHO SUBSCRIBE TO LIMITED OR “PAY AS YOU USE” BROADBAND INTERNET ACCESS. In the WAN configuration settings, there is a parameter called Maximum idle timer. This parameter controls how many seconds of inactivity before dropping connection to the Internet. The default setting is "0" which disables this functionality and the Internet will be connected all the time. We suggest that you should change the Maximum idle timer to "300" (5 minutes) or less if you are using a charged by the minute ...

SUBSCRIPCIÓN A INTERNET USUARIOS QUE CONTRATAN UN ACCESO A INTERNET DE BANDA ANCHA LIMITADO O DE “PAGO POR USO”. En los parámetros de configuración de WAN, existe un parámetro denominado Temporizador de tiempo de inactividad máximo. Este parámetro controla la cantidad de segundos de inactividad que deben transcurrir antes de interrumpir la conexión a Internet. El parámetro predeterminado es "0", que desactiva esta función y permite que la conexión a Internet esté activa todo el tiempo. Se recomienda cambiar el Temporizador ...