D-Link DCS-3716 Quick Installation Manual
Text of the manual
Documentation also available
on CD and via the D-Link
Website
Quick Installation Guide
Installations-Anleitung
Guide d’installation
Guía de instalación
Guida di Installazione
This document will guide you through the basic installation
process for your new D-Link Network Camera.
DCS-3716
Quick Installation Guide
Full HD Day & Night WDR Network Camera
D-Link DCS-3716 Quick Install Guide
2
ENGLISH
DCS-3716 Quick Install Guide
This installation guide provides basic instructions for installing the DCS-3716 Network
Camera on your network. For additional information about how to use the camera,
please see the User’s Manual which is available on the CD include in this package or
from the D-Link support website.
Installation Steps
1. Verify the package contents against the list below.
2. Hardware Overview
3. Hardware Installation
4. Configuration with Wizard
5. Adjust the Zoom/Focus
1. Package Contents
DCS-3716 Network Camera
Camera Stand
Manual and Software on CD-ROM
CAT5 Ethernet Cable
Power Adapter
Quick Install Guide
C-CS Mount Adapter (5mm Ring)
If any of the above items are missing, please contact your reseller.
D-Link DCS-3716 Quick Install Guide
3
ENGLISH
2. Hardware Overview
LED
Power and network indicator
I/O Connector
I/O connectors for external devices
BNC
Analog video output
Reset
Press and hold this button for
5 seconds to reset the camera
Audio In
Audio input connector for a
microphone
DC Power
12V DC
Audio Out
Audio output for external speakers.
Ethernet (PoE)
RJ-45 connector for Ethernet
which can also be used to power
the camera using PoE
Lens Connector
Connect to a CS mount
ICR Sensor
The IR-Cut Removable sensor judges
lighting conditions and switches from
color to infrared accordingly
Rear Panel
Front Panel
D-Link DCS-3716 Quick Install Guide
4
ENGLISH
1 AES
2 DCIRIS
3 NTSC
4 PAL
1
2
3
4
DC-Iris Connector
Connector for DC auto
iris lens
DIP Switch
Toggles between several regional formats.
1. AES: Auto Electric Shutter
2. DC IRIS: Toggle auto iris (DC drive)
3. NTSC: TV output signal selector
4. PAL: TV output signal selector
SD Card Slot
Local SD card for storing
recorded images and video
Right Panel
Left Panel
D-Link DCS-3716 Quick Install Guide
5
ENGLISH
3. Hardware Installation
Basic Connection (without PoE)
Connect the camera to your switch or router via Ethernet cable.
Connect the supplied power cable from the camera to a power outlet.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet cable.
PoE will transmit both power and data over a single cable.
Note: Once power has been established, the LED will turn red. When the device has
obtained an IP address and is accessible, the LED will turn green.
